★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

Sm-T500 frp done
Code:
Model : Samsung
Operation : FRP Bypass [Open YouTube]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM22 : SAMSUNG Mobile USB Modem #25
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-T500
IMEI: : NONE);UN(W15445
Software: : T500XXU3AUC6/T500OJM3AUC6/T500XXU3AUC6/T500XXU3AUC6
Product : TUR
Open link on phone and continue bypass.
Elapsed Time 58:39
[UltimateSams v0.6]
 
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
Job: Remove FRP
SELECTED: E40 - XT2159-10
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM50)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
Rsa autorization: Motorola S6302
Device request autorization.
Sending buffer: 292
Rsa autorization: success
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: motorola
Brand: motorola
Device: cyprus
Model: cyprus
Build ID: ROP31.166-112
CPU arhitecture: armeabi-v7a
Build product name: ums512_1h10_go
Build description: ums512_1h10_go_Natv-user 11 ROP31.166-112 d7c37 release-keys
Build Id: ROP31.166-112
Android Release: 11
Android Version: ROP31.166-112 release-keys
Security patch: 2023-11-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\motorola_ROP31_166-112_erase_frp.txt
Total Time: 00:00:20
Done.
 
infinix smart 8 hd frp reset
Code:
Job: Remove FRP
SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM12)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 743902 [5e] 100A8825
UID: M3T281_10_16_37
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_erase_frp_16.txt
Total Time: 00:00:35
Done.
 
Job: Remove FRP
SELECTED: SM-A032M
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 120A4E9C [5e] 91B125
UID: TK4U91_9_29_28
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032M
Build ID: TP1A.220624.014
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3coreub-user 13 TP1A.220624.014 A032MUBS3CXD2 release-keys
Build Id: TP1A.220624.014
Android Release: 13
Android Version: TP1A.220624.014.A032MUBS3CXD2
Security patch: 2024-03-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\samsung_TP1A_220624_014_A032MUBS3CXD 2_erase_frp.txt
Total Time: 00:00:44
Done.
 
SAMSUNG A20S,,207F FRP DONE
Device : Samsung Galaxy A20s (SM-A207F)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [SDM450] 00002000
OPK_DATA : 2444EA6A40A4CCA1CF7FCDBD41E29AB36E1AA41A820424ADA3 B1DA7DA21379DA
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM450_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [69]
Reading Device Information...OK
Software : RP1A.200720.012.A207FXXS4CVL1, A207FXXS4CVL1 [Tue Dec 13 16:42:13 KST 2022]
Android Ver. : 11
Patch Level : 2022-09-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 10.8
 
Mate 20 pro frp done
Code:
Operation : Reset FRP
Searching for COM1.0 Device...Found!
COM235 : HUAWEI USB COM 1.0 (COM235)
Opening Port...OK
Platform : Kirin_980
Sending Loader...[1]..[2]..[3]..Done
Reading Partition Table...Done
Erasing FRP Data...Done
Hold power button to reboot device.
Operation Finished.
UltimateHST v0.2
 
FRP Infinix Hot 20i (X665E) done!
USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 034C4D5CD8282C849EB406F2B3D6FAAE
SoC ID[0] : EA8493507D059B6A686D012B8FCE7CEA
SoC ID[1] : BAFB34173DC1401AD6618C9D9C3FD13C
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : A3A442
CID : D60103413341343432109435372459DB
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001CCF000000 [115,23 GB]
PRE EOL : NORMAL
Life. Est.A : 80%-90% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20241017_165253.log
 
Tecno Camon 20 Android 14 FRP Reset Success UMT

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&2ab6969e&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : , []
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 73469DC05D075BD8A041F649AB353661
SoC ID[0] : FA706A8220A043871B3ED6B5E99E6FAB
SoC ID[1] : 52B830DF965D1AC7BC0D205A16AAB8E5
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : MMC256
CID : D62D004D4D433235365126BA939C9A75
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003A40A00000 [233.01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
 
A115m bit 5 frp remove successfully

THANKS UMT A115M BIT 5
USING EDL CABLE TO PUT PHONE IN EDL MODE THAN CHANGE TO REGULAR CABLE AND ALL WHENT SMOOTH AND EASY

Device : Samsung Galaxy A11 (SM-A115M) BIT5
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 58C5414A3A35B2E6DAA9C7A3B816E594DA247411000F7E9422 1BF5F13119812C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_054]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [78]
Reading Device Information...OK
Software : SP1A.210812.016.A115MUBS5CWK2, A115MUBS5CWK2 [Sat Nov 25 09:21:16 KST 2023]
Android Ver. : 12
Patch Level : 2023-11-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.0
 
vivo y11 pattern and frp done
Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : ZTE Diagnostics Interface (COM53)
Driver Info : ZTE Corporation, ZTEusbser6k.sys, 16.2129.0.4
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [59]
Reading Device Information...OK
Software : , eng.compil.20240927.123310 [Fri Sep 27 12:31:04 CST 2024]
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...DonePatched OK
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 11.0
 
S21 FE G990B U9 lost mode removed
Device : Samsung Galaxy S21 FE 5G (SM-G990B) BIT-A
Operation : Samsung Lost Mode Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM42)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1501300 [SM8350] 00002000
OPK_DATA : F8A3638BD48716865314E6A2C6E50BFA28C18E8DDB3952209C 4AEC684D21588A
Initializing Protocol...OK
Using Pre-Defined Loader [SM-G990B_BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-G990B_BIT-A]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM8350, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...OK
Software : UP1A.231005.007.G990BXXS9GXI1, G990BXXS9GXI1 [Thu Aug 29 08:33:26 UTC 2024]
Android Ver. : 14
Patch Level : 2024-09-01
Resetting Lost Mode... Done Done Done
Once phone reboot in Odin Mode, full flash your device.
If stuck on Charging Logo, hold VOL DOWN + PWR for 5 Seconds.
Operation Finished.
QcFire Ver. 11.1
 
vivo y12 (vivo 1904) Reset done
USING PL_EXLOIT [VIVO V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM64)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&298c69d9&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : E91F438691B415C83553B96D5F9469C8
SoC ID[0] : CDBA4AD91F982CE89D656B4A3BD2F381
SoC ID[1] : 0FBA549F1901AAACE844FECB90E4C148
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
HRID : 3AFD3467454B59635CA7474BE50F84BA
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E036C34903E56C9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 60%-70% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Mon Oct 21 14:39:05 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20241021.144209
Locale : en-US
Patch : 2022-05-01
Bootloader : LOCKED
Erasing Userdata...OK
Operation Finished.
[UltimateMTK2 v1.6]
Log Saved : 20241127_171233.log
 
Device : Samsung Galaxy S22+ 5G (SM-S906E) BIT-A
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S906E_BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-S906E_BIT-A]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 128 GB
LU Count : 6 [0x01DA0400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [98]
Reading Device Information...OK [Sign]
Build : S906EXXSAEXJ1
Int. Build : SM-S906E_SEA_DX_QKEY2
Resetting FRP Lock...Failed
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 11.1
 
First 16 bytes from public rsa key.
B8928F81E592DF02E227A84968366708
***************
Phone Storage: EMMC
Job: Remove FRP
SELECTED: Blade A71
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
UID: TFSS61_16_28_16
***************
Manufacturer: ZTE
Brand: ZTE
Device: P963F07
Model: ZTE A7030
Build ID: RP1A.201005.001
CPU arhitecture: arm64-v8a
Build product name: s9863a3h10
Build description: s9863a3h10_Natv-user 11 RP1A.201005.001 20210716.025719 release-keys
Product name: P963F07
SW Version: GEN_LA_P963F07V1.0.0B07
Board: s9863a3h10
Build Id: RP1A.201005.001
Android Release: 11
Android Version: GEN_LA_A71_V1.2
Security patch: 2021-07-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\ZTE_ZTE_A7030_GEN_LA_A71_V1_2_erase_ frp.txt
Total Time: 00:00:20
Done.
 
Device : Xiaomi Redmi 10C (fog)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 64 GB
LU Count : 6 [0x00D5F800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Device : Xiaomi
Software : , V13.0.5.0.RGERUXM [Wed Jun 15 18:26:25 CST 2022]
Android Ver. : 11
Patch Level : 2022-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.3
 
t290 U4 frp done usning U5 loader
Code:
Device : Samsung Galaxy Tab A 8.0 (2019) (SM-T290) BIT-5
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1E00B00 [8937] 00002000
OPK_DATA : 7FBB331AFC9DA758595D95025D8710CB93D6394F2565203A79C3B740EFA213AB
Initializing Protocol...OK
Using Pre-Defined Loader [SM-T290_BIT5.ufl]
Preparing Loader...Done
Sending Loader [SM-T290_BIT5]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [69]
Reading Device Information...OK
Software : RP1A.200720.012.T290XXS4CWC1, T290XXS4CWC1 [Tue Mar 14 16:53:58 +07 2023]
Android Ver. : 11
Patch Level : 2022-12-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.3
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done
 
Operation : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : sweet_global
Version : V13.0.14.0.SKFMIXM
Code Base : 12
Serial : 0xa4b654b0
Ext Info : US, es, F, 2, 2
Model : M2101K6R
Reading Partition Table...[108] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 11.3
 
Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0C00&Modem
Port: : COM91 : SAMSUNG Mobile USB Modem #47
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-N976U
IMEI: : 359XXXXXXXXXXXX
Software: : N976USQS5EUKA/N976UOYN5EUKA/N976USQS5EUKA/N976USQS5EUKA
Product : ATT
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-N976U
Product : d2xq2
Device : d2xq2
Andriod Ver. : 11
Patch Level : 2021-12-01
PDA : N976USQS5EUKA
Bootloader : N976USQS5EUKA
Build ID : RP1A.200720.012.N976USQS5EUKA
Build Date : Tue Nov 16 10:53:33 KST 2021
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 22:03
[UltimateSams v0.7]
Saved to Logs\250119_162203.log
 
Infinix Hot 50i X6531

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM85)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&38846b63&0&4
#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 142A3ACD18C98338119F7EBF1C3159DF
SoC ID[0] : EDD6329A8098FB5B9D8140BAB36255C0
SoC ID[1] : F970973FF974E5B3BB77A72363A8EB1A
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : 3CBFE79A89E3635EA67655C281509161
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : MMC256
CID : D62D004D4D4332353651298DC11DCA07
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003A40A00000 [233.01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20250128_184325.log
 
Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM69 : SAMSUNG Mobile USB Modem #38
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A205G
IMEI: : 355XXXXXXXXXXXX
Software: : A205GUBUBCWD6/A205GOWOBCWD6/A205GNDXUBCWE1/A205GUBUBCWD6
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A205G
Product : a20
Device : a20
Andriod Ver. : 11
Patch Level : 2023-03-01
PDA : A205GUBUBCWD6
Bootloader : A205GUBUBCWD6
Build ID : RP1A.200720.012.A205GUBUBCWD6
Build Date : Fri Apr 14 05:50:45 KST 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 46:36
[UltimateSams v0.7]
Saved to Logs\250315_124636.log
 
You must log in or register to reply here.
Back
Top