★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

techno spark 30c
Brand/Model : *Auto* / *Auto Detect*
Operation : META Functions (Enable ADB (Infinix))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
Connecting Device...OK
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM36)
Brand : TECNO
Model : TECNO KL8h
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Fri Sep 20 21:54:34 CST 2024
Ven. Date : Fri Sep 20 21:36:12 CST 2024
Platform : MT6835
OEM : unknown
OEM Device : unknown
Disp. ID : KL8h-H353VX-U-IN-240920V398
Inc. Ver. : 240920V378
Patch Level : 2024-09-05
OTA Ver. : unknown
BRAND : TECNO
MODEL : TECNO KL8h
BUILD : KL8h-H353VX-U-IN-240920V398
BUILD DATE : Fri Sep 20 21:54:34 CST 2024
Enabling ADB...Done
Operation Finished.

Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Reset FRP (ADB)
Searching for Device..Found
Brand : TECNO
Model : TECNO KL8h
Android Ver. : 14
Build : KL8h-H353VX-U-IN-240920V398
Build Date : Fri Sep 20 21:54:34 CST 2024
Patch Level : 2024-09-05
Bootloader : unknown
Resetting FRP Lock...Done
Operation Finished.
 
Device : Xiaomi Mi A2
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
WARNING! High Speed Driver is not installed.
Hardware : MSM8996, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00002000]
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK [69]
Reading Device Information...OK
Software : QKQ1.190910.002 V11.0.28.0.QDIMIXM, V11.0.28.0.QDIMIXM [Fri Jul 2 09:41:53 WIB 2021]
Android Ver. : 10
Patch Level : 2021-07-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.7
Report Post IP
​
 
nokia 5.3 ta-1234 frp done

Device : Nokia 5.3 (TA-1234)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00000000
OPK_DATA : C0543DB485580D98D768C12906526F0A6E785019591A402429 A7406CFF83AAA8
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [79]
Reading Device Information...OK
Device : HMD Global Nokia 5.3 [CAP_sprout]
Brand : Nokia
Prod.Name : CaptainAmerica_00WW
Software : 00WW_3_490_SP03, 00WW_3_490_SP03 [Fri Jun 9 13:59:21 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.7
 
OnePlus Nord CE 2 5G (IV2201) NEW SECURITY FRP



Code: 
USING PL_EXLOIT [OPPO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON] 
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM38)
Device Path : \\?\usb#vid_22d9&pid_0006#5&729f7fe&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900/1080
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 904A13AF22DBC99B0DC69B4BFC826D89
SoC ID[0] : 48606FDD90E7DE0AB04A63D0AA708C6E
SoC ID[1] : 3FCF5A80E2B0128B4F3810E8F33F9947
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : D7196902B9ABD37F3BE36A0D0DC841DE
RID : D7196902B9ABD37F3BE36A0D0DC841DE
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V9001JM-B81
CID : CE014B4D3856393030314A4D2D423831
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.0.1]
Log Saved : 20250406_201804.log
 
REDMI NOTE 13 FRP DONE;
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.4.1
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01D46800] [0x00000800] [0x00000800] [0x00002000] [0x00080000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [102]
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8
 
Device : Xiaomi Redmi 9T
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221205011709, V13.0.2.0.SJQMIXM [Mon Dec 5 01:23:38 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8
 
Device : Xiaomi Redmi S2
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [57]
Reading Device Information...OK
Device : Xiaomi Redmi S2 [ysl]
Brand : xiaomi
Prod.Name : ysl
Software : PKQ1.181203.001, V12.0.2.0.PEFMIXM [Thu Sep 24 20:47:30 WIB 2020]
Android Ver. : 9
Patch Level : 2020-09-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6173010182
Phone : +59175****53
Display ID : 44EW-FPCJ-QP24-UWE
Writing Data...Done
Operation Finished.
QcFire Ver. 11.8
 
Brand/Model : Motorola / G22 (XT2231)
Operation : Reset FRP
BOOT CFG : [EXPLOIT:OFF]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM26)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&13de0221&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 016F8F1EFE22193778D76337C96178C0
SoC ID[0] : BF795D4E51C570CFE97651D3DC8FA98E
SoC ID[1] : DBCAD0254065BA6C344E8241F07D2071
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : 160F2E9030B8A56766EBE84257EDBC21
RID : 160F2E9030B8A56766EBE84257EDBC21
Int. RAM : 0x000000000003A000 [232,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DAB
CID : 15010044563644414202F8A8FE2F49D5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : motorola
Manuf. : motorola
Model : moto g22
Device : hawaiip
And. Ver. : 12
Prod. Name : hawaiip_g
Build Dt. : Sat Mar 1 11:00:40 CST 2025
Display ID : STAS32.79-77-28-63-9
Ver. Inc. : 77-28-63-9
Locale : en-US
Patch : 2025-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.1]
Log Saved : 20250422_171523.log
 
Device : Xiaomi Poco X3 NFC (surya)
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM7150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6513316490
Phone : +59177****55
Display ID : 4RQU-WNCO-3W5B-MOW
Writing Data...Done
Operation Finished.
QcFire Ver. 11.8
 
Device : Xiaomi Poco X3 NFC (surya)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...DoneOKDone
Sending Loader [SM7150]...
Executing Loader...
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...
Detecting Storage Type...OK
Hardware : SM7150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8
 
Oppo a57 format and frp reset done
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27 277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [56]
Reading Device Information...OK
Device : OPPO OPPO A57 [msm8937] [CPH1701]
Brand : OPPO
Prod.Name : CPH1701
Software : CPH1701EX_11_A.31_171214, eng.root.20171214.113651 [Thu Dec 14 11:39:35 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-12-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8
 
Samsung Galaxy Tab A9+ 5G (SM-X218U) FRP Remove Done



Code: 
Device    : Samsung Galaxy Tab A9+ 5G (SM-X218U) BIT-6
Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver.    : 2OK
Hardware ID    : E1901A00 [SM6375] 00002000
OPK_DATA    : AADE3DB87CCB3F7EFB0D28CEED23F0E3B37CC33B6D93AFE23C28E2B62A16D7D0
Initializing Protocol...OK
Using Pre-Defined Loader [SM-X218U BIT-6.ufl]
Preparing Loader...Done
Sending Loader [SM-X218U BIT-6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : SM6375, UFS, 64 GB
LU Count    : 6 [0x00EC1C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...OK [Sign]
Build    : X218USQS3CXH3
Int. Build    : SM-X218U_NA_VZW_QKEY1
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8
 
Code: 
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver.    : 2OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : 8937, EMMC, 16 GB
LU Count    : 3 [0x01D5A000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [51]
Reading Device Information...OK
Device    : vivo vivo [msm8937] [PD1613]
Brand    : vivo
Prod.Name    : PD1613
Software    : MMB29M release-keys, eng.compiler.20180823.181455 [2018年 08月 23日 星期四 18:20:14 CST]
Android Ver.    : 6.0.1
Patch Level    : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver.    : 2OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : 8937, EMMC, 16 GB
LU Count    : 3 [0x01D5A000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [51]
Reading Device Information...OK
Device    : vivo vivo [msm8937] [PD1613]
Brand    : vivo
Prod.Name    : PD1613
Software    : MMB29M release-keys, eng.compiler.20180823.181455 [2018年 08月 23日 星期四 18:20:14 CST]
Android Ver.    : 6.0.1
Patch Level    : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8
 
vivo Y55s{PD1613BF} PATTERN AND FRP WITH UMT.....

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [51]
Reading Device Information...OK
Device : vivo vivo 1610 [msm8937] [PD1613BF_EX]
Brand : vivo
Prod.Name : PD1613BF_EX
Software : MMB29M release-keys, eng.compiler.20201031.222219 [Sat Oct 31 22:26:50 CST 2020]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done
 
Vivo y17 pattern unlock with umt...
USING PL_EXLOIT [VIVO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 390E1AFF48D4740C38063046F3C71A17
SoC ID[0] : E7BF5953FAE1093A3A70FEF142EC867D
SoC ID[1] : 9ACC11DD41F1D2AFDB38B3168DA5C2D4
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
HRID : A4663482B1082E30BF58B08CD390811F
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DV6DMB
CID : 150100445636444D420273859017C5C7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1902
Device : PD1901F_EX
And. Ver. : 9
Prod. Name : PD1901F_EX
Build Dt. : Mon Oct 21 16:45:45 CST 2024
Display ID : PPR1.180610.011 release-keys
Ver. Inc. : compiler10211646
Locale : en-US
Patch : 2021-05-01
Bootloader : LOCKED
Erasing Userdata...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20250313_150501.log
 
Redmi note 8 frp with umt......
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Detecting Chip Type...OK
Hardware : SDM665, EMMC, 2 GB
LU Count : 3 [0x00000000] [0x00000000] [0x00000000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [87]
Reading Device Information...OK
Device : Xiaomi
Software : , V12.5.2.0.RCOINXM [Fri Jun 17 19:36:12 WIB 2022]
Android Ver. : 11
Patch Level : 2022-05-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.6
 
vivo 1807 FORMET AND FRP WITH UMT......
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
Detecting Storage Type...OK
Hardware : 8937, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [59]
Reading Device Information...OK
Device : vivo vivo 1807 [msm8937_64]
Brand : vivo
Prod.Name : msm8937_64
Software : OPM1.171019.026 release-keys, eng.compil.20241010.115310 [Thu Oct 10 11:53:10 CST 2024]
Android Ver. : 8.1.0
Patch Level : 2021-07-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6
 
Itell a60 frp with umt.....
Job: Remove FRP
SELECTED: A60s(A662LM)
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM22)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] C0CA0 [5e] 91D568
UID: 30bP0B_7_42_104
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_5.txt
Total Time: 00:00:39
Done.
 
Redmi 9a reset frp with umt.....
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
DL AGENT : DA_Redmi_9A.bin
PL : C:\Users\TONY MOBILE SOFTWARE\Downloads\Compressed
\Xiaomi Redmi 9a Preloader File (Brom Bypass)\Xiaomi
Redmi 9a Preloader File (Brom Bypass)\preloader_k62v1
_64_bsp--V12.0.2.0.QCDIDXM_id.bin
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM7)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 7F7D412083DB48429C579047C80462B3
SoC ID[0] : 3D3EE5420EC4264323AABFC96A7E6CE5
SoC ID[1] : 2A4BD0A4457A9B2F8DAA87A7DAA88AA2
Running Exploit...Done
Preloader : preloader_k62v1_64_bsp--V12.0.2.0.QCDIDXM_id.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
DA : DA_Redmi_9A.bin
DA_INFO : MTK_AllInOne_DA_v3.3001.2020/07/07.10:10_513994
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100424A5444345209C37C8E2EA7B9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : B543B075EAF10BDD1BE2FB979CA91207
RID : B543B075EAF10BDD1BE2FB979CA91207
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : BJTD4R
CID : 150100424A5444345209C37C8E2EA7B9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 10
Build Dt. : Thu Feb 9 12:08:14 CST 2023
Display ID : QP1A.190711.020
Ver. Inc. : V12.0.26.0.QCDINXM
Locale : en-GB
Mod. Dev. : dandelion_in_global
Patch : 2023-02-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.0]
Log Saved : 20250325_122132.log
 
Tecno spark 20 pro 5g reset frp with umt...by adb
Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Reset FRP (ADB)
Searching for Device..Found
Brand : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
TECNO
Model : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
TECNO KJ8
Android Ver. : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
14
Build : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
KJ8-H338KL-U-IN-250219V1215
Build Date : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
Wed Feb 19 22:41:18 CST 2025
Patch Level : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
2025-02-05
Bootloader : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
unknown
Resetting FRP Lock...Done
Operation Finished.
[UltimateMTK2 v2.2]
Log Saved : 20250506_124140.log
 
You must log in or register to reply here.
Back
Top