Post Here successful reports with Avengers Box

Fast Unlocking

Fast Unlocking

Administrator
Admin
Clone Samsung S5 N9006V MT6572 Read Flash ( Stock Rom )
Clone Samsung S5 N9006V MT6572 Read Flash ( Stock Rom )


Read Flash


Clone_Samsung_S5_N9006v_Read_S.png


Clone_Samsung_S5_N9006v_Read_S.png



See Here How to Read Stock Rom With Avenger Box MTK Module​
 
Karbonn A11* Format done


Code:
Action : Format UserData.
Selected Acer:Acer Z520
Exe version: Avengers Box MTK 0.1
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D43303447582844072671A1
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000
Detecting format adress....wait!

FORMAT EMMC FLASH : BEGIN: 0x38f40000 - LEN: 0xe200000
FORMAT EMMC FLASH : BEGIN: 0x47140000 - LEN: 0x52c00000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
 
Wintouch M702 Mt-6572 emmc
Read flash done in preloader mode
just in 3.23sec

wintouch_backup.png



wintouch_read_done.png





Code:
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948
EMMC FW VERSION: 16:00:00:00:00:00:00:00
EMMC CID: 90014A2058494E594816A1286E8BCF2F
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000
Detected partitions count: 20
Start dumping flash, this can take up to 1 hour.......
Start procesing PRELOADER ......
Start procesing MBR ......
Reading: BEGIN: 0x880000 - LEN: 0x200
Start procesing EBR1 ......
Reading: BEGIN: 0x900000 - LEN: 0x200
Start procesing PRO_INFO ......
Reading: BEGIN: 0x980000 - LEN: 0x300000
Start procesing NVRAM ......
Reading: BEGIN: 0xc80000 - LEN: 0x500000
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1180000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x1b80000 - LEN: 0xa00000
Start procesing UBOOT ......
Start procesing BOOTIMG ......
Reading: BEGIN: 0x2600000 - LEN: 0x600000
Start procesing RECOVERY ......
Reading: BEGIN: 0x2c00000 - LEN: 0x600000
Start procesing SEC_RO ......
Reading: BEGIN: 0x3200000 - LEN: 0x40000
Start procesing LOGO ......
Start procesing ANDROID ......
Reading: BEGIN: 0x3fc0000 - LEN: 0x32000000
Backup CACHE disabled, we will skip it....
Backup USRDATA disabled, we will skip it....
Backup FAT disabled, we will skip it....
Saved to : C:\Users\Blacky\Documents\Android_MTK\firmware_backup\Acer_Acer Z520_09_17_2015_13_21_19
Wait untill phone will start charging.
All done.
 
Karbonn A12Star Flash and Backup Security done


Flash Done:

Code:
Flash files count is :11
Action : Firmware update.
Selected Acer: Acer Z520
Exe version: Avengers Box MTK 0.1
Scenario: Safe Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D43303447588808063D51A9
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.
flash_11.png



flash_2.png



Backup Security Done:

Code:
version: Avengers Box MTK 0.1
Selected phone: Acer Z520
Action: Backup Security Items
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D43303447588808063D51A9
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000
Dumping Preloader.
Appending PRELOADER RAW
Dumping PRO_INFO.
Reading: BEGIN: 0x700000 - LEN: 0x300000
Dumping NVRAM.
Reading: BEGIN: 0xa00000 - LEN: 0x500000
Dumping PROTECT_F.
Reading: BEGIN: 0xf00000 - LEN: 0xa00000
Dumping PROTECT_S.
Reading: BEGIN: 0x1900000 - LEN: 0xa00000
Dumping SEC_RO.
Reading: BEGIN: 0x2f80000 - LEN: 0x40000
Saved to : C:\Users\Blacky\Documents\Android_MTK\security_backup\Acer_Acer Z520_09_17_2015_17_08_21
Wait untill phone will start charging.
All done.
 
Lava Iris 405+
Flash Done
Security backup Done without root


Boot info
Code:
Action : Boot Info.
Selected Acer:Acer Z520
Exe version: Avengers Box MTK 0.1
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A4D420131F7C4FB51E7
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000
IMEI marker was found in nvram
IMEI[1] from NVRAM: 911305955499182
IMEI[2] from NVRAM: 911305955515664
Partition table saved to: Android_MTK\partition_tables\
All done.
 
Karbonn A47 Blue screen only solved

by Flashing scatter



Flash done

Code:
Flash files count is :9
Action : Firmware update.
Selected Acer: Acer Z520
Exe version: Avengers Box MTK 0.1
Scenario: Safe Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Hynix] H9TA4GH2GDMCPR
BOOT STYLE : NAND BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it in settings.
After repeat opperation.
Detecting high speed port, wait......
Detected : Tinno DA USB VCOM Port (COM16)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Download firmware to flash now...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.
 
ZTE U807 Unlock
Code:
Selected connection metod: META Mode
Exe version: Avengers Box MTK 0.2.1
Selected phone:
Scanning for presents meta ports...
Detected(32) : PreLoader USB VCOM Port (COM32)
Skipping brom stage, meta port found.
Start sync target, waiting responce.....
BaseBand CPU : MT6577
SW_VER : MAUI.11AMD.W12.36.SP.V3.F1.P22
HW_VER : ZZTENJ17_TD3001_ICS2_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 867354000488471
Simlock Info : Sim [1]
Block1[N] :Unlocked Code : 12345678
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************
All done.
 
Celkon Q42 Restart On Logo done by Format
Boot info:
Code:
Action : Boot Info.
Selected 0-By CPU:MT6571_EMMC
Exe version: Avengers Box MTK 0.2.1
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 51:00:00:00:00:00:00:00
EMMC CID: 11010030303447393051D10EC6506121
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.691895 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: 911406900190346
IMEI[2] from NVRAM: 911406900190353
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.

Format:

Code:
Action : Format UserData.
Selected 0-By CPU:MT6582
Exe version: Avengers Box MTK 0.2.1
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : Tinno PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 51:00:00:00:00:00:00:00
EMMC CID: 11010030303447393051D10EC6506121
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.691895 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : Tinno DA USB VCOM Port (COM16)
Detecting format adress....wait!

FORMAT EMMC FLASH : BEGIN: 0x3e980000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x46780000 - LEN: 0x39c00000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
 
QMobile
A6

Hang on Noir Logo has been wiped & repaired successfully
Code:
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM25)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948
EMMC FW VERSION: 15:00:00:00:00:00:00:00
EMMC CID: 90014A2058494E : 000000000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM26)
Detecting format adress....wait!

FORMAT EMMC FLASH : BEGIN: 0x224e4000 - LEN: 0x20100000
FORMAT EMMC FLASH : BEGIN: 0x425e4000 - LEN: 0x20100000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
 
Acer
Z520

Buggy application has been removed successfully from phone.. Application manager [builtin] was unable to remove but avengers done this job easily
HQ65Oc3.png
 
QMobile
X2

Hang on logo & restart loop has been resolved
Code:
Flash files count is :9
Action : Firmware update.
Selected Model: Qmobile: Q Mobile Noir x6
Exe version: Avengers Box MTK 0.2.9
Scenario: [4]Flash reset package
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6571_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 208 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM60)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Format enabled.
FORMAT NAND FLASH : BEGIN: 0x158c0000 - LEN: 0x180000
FORMAT NAND FLASH : BEGIN: 0x15a40000 - LEN: 0x9740000
Download firmware to flash now...
Wait untill phone will start charging.
All done.
 
Rivo Rytham
PZ15

Successfully flashed & repaired to its original condition
Code:
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6592_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x4938584d4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004938584D : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
 
Infocus
M550D 3D Bootloader secured phone
Forgotten pattern password, has been wiped successfully
Code:
Action : Reset to factory default.
Selected Model: 0-By CPU:MT6571_EMMC
Exe version: Avengers Box MTK 0.3.9
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[3]Detected: MediaTek PreLoader USB VCOM (Android) (COM3)
\\?\usb#vid_0e8d&pid_2000#5&2e021e31&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[20]META Port Detected: MediaTek DA USB VCOM (Android) (COM20)
USB\VID_0E8D&PID_2007\5&2E021E31&0&4
Start sync target, waiting responce.....
Resetting phone, wait....
Resetting phone step 2, wait....
Reset to factory default done.
All done.
 
You must log in or register to reply here.
Back
Top