Post Here successful reports with Avengers Box

Jazz digit 4g music blu hang on logo done with avengers-box

Flash files count is :19
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: Avengers Box MTK 0.7.7
Scenario: [0]Safe Flash
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(399) : MediaTek USB Port_V1632 (COM399)
[399] \\?\usb#vid_0e8d&pid_0003#6&32310fdd&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Loading emmi from download
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(8) : MediaTek DA USB VCOM (Android) (COM8)
[8] \\?\usb#vid_0e8d&pid_2001#6&32310fdd&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting flash helio.
[15] WRITE TO PARTITION [ md1img ]
[16] WRITE TO PARTITION [ md1dsp ]
[17] WRITE TO PARTITION [ spmfw ]
[18] WRITE TO PARTITION [ mcupmfw ]
[22] WRITE TO PARTITION [ lk ]
[23] WRITE TO PARTITION [ lk2 ]
[24] WRITE TO PARTITION [ loader_ext1 ]
[25] WRITE TO PARTITION [ loader_ext2 ]
[26] WRITE TO PARTITION [ boot ]
[27] WRITE TO PARTITION [ logo ]
[28] WRITE TO PARTITION [ tee1 ]
[29] WRITE TO PARTITION [ tee2 ]
[30] WRITE TO PARTITION [ system ]
[31] WRITE TO PARTITION [ cache ]
[33] WRITE TO PARTITION [ userdata ]
HINT:
If phone stuck on logo, for some phones help factory reset.
Select factory reset tab/reset to factory default.
[helio]Wait untill phone will start charging.
[0]All done.
 
Jazz digit 4g Elite MT6739 Dead Recover with avengers-box

Untitled.jpg
 
Action : Boot Info.
Selected Tecno:Spark 4
Exe version: Avengers Box MTK 0.7.9
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(31) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM31)
[31] \\?\usb#vid_0e8d&pid_2000#6&236cc9f3&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6761
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Build ID: PPR1.180610.011
Display ID: BB4k-H6114UVW-PGo-200503V86
Version: 9
Build Date: Sun May 3 06:39:32 CST 2020
Model: TECNO BB4k
Brand: TECNO
Device: TECNO-BB4k
Manufacturer: TECNO MOBILE LIMITED
Mediatek Version Release: BB4k-H6114UVW-PGo-200503V86
This phone have FRP partition.
Phone have OTP partition.
Modem version: MOLY.LR12A.R3.MP.V75.5.P12
[helio]Wait untill phone will start charging.
[0]All done.
 
Tecno Pop 5 BD2P Reset FRP Done
Press V+, V- insert usb cable


Phone Storage: EMMC
EXE: Avengers Spreadtrum Module 2.0
SELECTED: SC7731E_EMMC_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM6)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TBHH20_23_21_37
***************
Manufacturer: TECNO MOBILE LIMITED
Brand: TECNO
Device: TECNO-BD2p
Model: TECNO BD2p
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: sp7731e_1h10
Build description: BD2p-SP613DEF-RGo-OP-210825V8
Transsion device name: TECNO POP 5
Board: BD2p
Build Id: RP1A.201005.001
Android Release: 11
Android Version: BD2p-SP613DEF-RGo-OP-210825V8
Security patch: 2021-09-05
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
 
TECNO SPARK 6 AIR imei Repair [KE6J one click done

Selected connection metod: Meta Connection(EXE API)
Exe version: Avengers Box MTK 0.7.9
Selected phone: ELBRUS
Action : IMEI REPAIR.
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(45) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM45)
[45] \\?\usb#vid_0e8d&pid_2000#5&309e1828&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[9]META Port Detected: MediaTek USB VCOM (Android) (COM9)
USB\VID_0E8D&PID_2007\5&309E1828&0&5
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V114.9.P17
[META]HW_VER : TK_MD_BASIC_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 353xxxxxxxxxx
Phone imei[1] : 353xxxxxxxxxxxx
IMEI to repair: [2] 35389xxxxxxxxxxx
Phone imei[2] : 3538xxxxxx
Clean Boot flag ok.
[0]All done
 
STYLO BOLD PLUS(DDJ18) network unlock Done

Exe version: Avengers Box MTK 0.7.9
Selected model: 0-By CPU ELBRUS
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(26) : MediaTek PreLoader USB VCOM_V1633 (Android) (COM26)
[26] \\?\usb#vid_0e8d&pid_2000#6&ed0470f&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[55]META Port Detected: MediaTek USB VCOM (Android) (COM55)
USB\VID_0E8D&PID_2007\6&ED0470F&0&1
Start sync target, waiting responce.....
ChipID: MT6580
[MT6580]Using Algo 1
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V285.5
[META]HW_VER : BIRD_Q0MP1_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 35497410043----
Phone imei[2] : 35497410043----
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
[0]All done.
 
ITEL A25 Pro FRP 1 Click
Logs Below

Phone Storage: EMMC
EXE: Avengers Spreadtrum Module 2.0
SELECTED: A25 Pro(L5002P)
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM38)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TC0G96_25_31_2
***************
Build ID: PPR1.180610.011
CPU arhitecture: armeabi-v7a
Manufacturer: itel
Hardware: sp9832e_1h10_go
Build product name: L5002P
Build description: L5002P-user 9 PPR1.180610.011 144 release-keys
Product name: F3210
Transsion device name: itel A25 Pro
Build Id: PPR1.180610.011
Model: itel L5002P
Android Release: 9
Android Version: L5002P-F3210-9.0-OP-V028-20210818
Security patch: 2021-08-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
 
ZTE Blade A31 Plus FRP DONE

ZTE Blade A31 Plus FRP DONE



Spreadtrum 9863a_3h10 Board
First 16 bytes from public rsa key.
B8928F81E592DF02E227A84968366708
***************
Phone Storage: EMMC
SELECTED: A31
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM41)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TGYV35_11_34_16
***************
Manufacturer: ZTE
Brand: ZTE
Device: P963F80
Model: ZTE Blade A31 Plus
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: s9863a1h10_go_32b
Build description: s9863a1h10_go_32b_general-user 11 RP1A.201005.001 20220505.164207 release-keys
Product name: P963F80
SW Version: GEN_LA_P963F80V1.0.0B09
Board: s9863a1h10_go_32b
Build Id: RP1A.201005.001
Android Release: 11
Android Version: GEN_LA_A31_Plus_V1.5
Security patch: 2022-04-05
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Avengers Spreadtrum Module 2.1.3
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\GEN_LA_A31_Plus_V1_5_erase_frp.txt
Total Time: 00:00:23
Done.
 
Exe version: Avengers Box MTK 0.8.5
Selected model: 0-By CPU AUTO
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(89) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM89)
[89] \\?\usb#vid_0e8d&pid_2000#6&225b8b70&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: MediaTek USB VCOM (Android) (COM19)
USB\VID_0E8D&PID_2007\6&225B8B70&0&6
Start sync target, waiting responce.....
ChipID: MT6739,S01
[MT6739,S01]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V128.1.P2
[META]HW_VER : HY6731_KAIO_M_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 350*********
Phone imei[2] : 35************
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.
 
mobicel vodacom s1 smart network lock done.
Exe version: Avengers Box MTK 0.8.5
Selected model: 0-By CPU AUTO
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(89) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM89)
[89] \\?\usb#vid_0e8d&pid_2000#6&225b8b70&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: MediaTek USB VCOM (Android) (COM19)
USB\VID_0E8D&PID_2007\6&225B8B70&0&6
Start sync target, waiting responce.....
ChipID: MT6739,S01
[MT6739,S01]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V128.1.P2
[META]HW_VER : HY6731_KAIO_M_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 350*********
Phone imei[2] : 35************
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.
 
myphone FUN 9 -Avenger Spreadtrum module 2.2.0

Phone Storage: EMMC
SELECTED: SC9832E_EMMC
ACTION: Format Userdata
If phone will stuck on logo, perform factory reset from diag mode tab.
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM16)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TFVC42_16_19_30
Build product name: myPhone_Fun_9
Build description: myPhone_Fun_9-user 11 RP1A.201005.001 45854 release-keys
Build Id: RP1A.201005.002
Android Release: 11
Android Version: myPhone_Fun_9_v11.1.2_30052022
Security patch: 2022-04-05
[misc]Format OK.
[metadata]Format OK.
[userdata]Format OK.
[cache]Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Avengers Spreadtrum Module 2.2.0
Log saved:
C:\Users\Documents\spreadtrum_module\Saved_Logs\my Phone_Fun_9_v11_1_2_30052022_format_userdata_emmc. txt
Total Time: 00:00:33
Done.
 
Lenovo a2016a40 done
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Resetting userdata.
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
 
Hisense U70 HWCD109E FRP RESET SUCESSFULL WITH BOSS AVB
READ U70 HWCD109E
SELECTED: SC7731E
[0]ACTION: Boot Info
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM12)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 91D91D [5e] 91D91D
FileSystem: EMMC
Read partition info is supported by loader.
***************
Build ID: OPM2.171019.012
CPU arhitecture: armeabi-v7a
Manufacturer: Hisense
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: U964
Build description: sp7731e_1h10_native-user 8.1.0 OPM2.171019.012 38214 release-keys
Product name: U964
Board: HWCD109E
Build Id: OPM2.171019.012
Model: Hisense U70
Android Release: 8.1.0
Android Version: Hisense_HWCD109E_01_S03_01_01_ZA01
Security patch: 2023-09-05
This phone have frp partition.
CPU NAME: SC7731E
SN: GLKS119B23112303899
Found [w_fixnv1] [w_fixnv1] Size to download: 1024 KB
Length: 80000 chk: AE11 calculated chk: AE10 calculated chk_32: AE11
IMEI 1: 865393062033991
IMEI 2: 865393062034007
IMEI 3: 867400020316638
IMEI 4: 867400020316646
Simlock Type: 4

Simlock Status:
SIMLOCK: INACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[4]Simlock Type: 0 0
[can take 0-10 sec]Wait untill phone restart.
Exe version: Avengers Unisoc Module 2.2.9
Log saved:
C:\Avengers\spreadtrum_module\spreadtrum_module_ba ckup_folder\Saved_Logs\Hisense_sc7731e_1h10_v1_1_0 _Hisense_HWCD109E_01_S03_01_01_ZA01_boot_info.txt
Total Time: 00:00:35
Done.

FRP RESET DONE
SELECTED: SC7731E
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM12)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 91D91D [5e] 91D91D
FileSystem: EMMC
Read partition info is supported by loader.
***************
Build ID: OPM2.171019.012
CPU arhitecture: armeabi-v7a
Manufacturer: Hisense
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: U964
Build description: sp7731e_1h10_native-user 8.1.0 OPM2.171019.012 38214 release-keys
Product name: U964
Board: HWCD109E
Build Id: OPM2.171019.012
Model: Hisense U70
Android Release: 8.1.0
Android Version: Hisense_HWCD109E_01_S03_01_01_ZA01
Security patch: 2023-09-05
This phone have frp partition.
CPU NAME: SC7731E
Removing frp, wait...
[0]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Avengers Unisoc Module 2.2.9
Log saved:
C:\Avengers\spreadtrum_module\spreadtrum_module_ba ckup_folder\Saved_Logs\Hisense_sc7731e_1h10_v1_1_0 _Hisense_HWCD109E_01_S03_01_01_ZA01_erase_frp.txt
Total Time: 00:00:46
Done.
 
vivo y90 Reset done
Action : Reset to factory default.
Selected Model: Vivo:Y81
Exe version: Avengers Box MTK 0.8.1
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(114) : MediaTek PreLoader USB VCOM (Android) (COM114)
[114] \\?\usb#vid_0e8d&pid_2000#6&298c69d9&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[63]META Port Detected: MediaTek USB VCOM (Android) (COM63)
USB\VID_0E8D&PID_2007\6&298C69D9&0&4
Start sync target, waiting responce.....
ChipID: MT6765,S01
[MT6765,S01]Using Algo 5
Brand: vivo
Board: k62v1_64_bsp
Model: vivo 1823
Android Version: 8.1.0
Mediatek Version: alps-mp-o1.mp6.tc19sp-V2_k62v1.64.bsp_P293
Branch: alps-mp-o1.mp6.tc19sp
Security Patch: 2021-10-01
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[helio]Wait untill phone will start charging.
[0]All done.
 
You must log in or register to reply here.
Back
Top