Post here successfully operations via NCK Online Tool

Fast Unlocking

Fast Unlocking

Administrator
Admin
SELECTED: SM-A035M
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 741904 [5e] A45071E
UID: M1T458_20_14_30
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a03
Model: SM-A035M
Build ID: TP1A.220624.014
CPU arhitecture: arm64-v8a
Build product name: a03
Build description: a03ub-user 13 TP1A.220624.014 A035MUBU1CWA9 release-keys
Build Id: TP1A.220624.014
Android Release: 13
Android Version: TP1A.220624.014.A035MUBU1CWA9
Security patch: 2023-01-01
Bootloader can be unlocked: 1
CPU NAME: T606
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
 
Exe Version: NCK Samsung Online Tool v0.5
Brand: Samsung QC
Model: Galaxy A23 (SM-A235M) BIT4
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM25) detected.
Firehose protocol: 2
HW ID: 00002000E1801B00
PK HASH: 7A7236E4CE1570EB42FC94CC07145134F6354DE83C8BE01EE5 062D1E4553C348
using loader: prog_firehose_ddr_A235M_Bit4.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 118,64 GB Partitions count: 34
Volume[1] Size: 8,11 MB Partitions count: 2
Volume[2] Size: 8,11 MB Partitions count: 2
Volume[3] Size: 4,11 MB Partitions count: 2
Volume[4] Size: 512,11 MB Partitions count: 36
Volume[5] Size: 8,11 MB Partitions count: 2
[01B2C7FB]Userdata Size: 108,7 GB
Partitions count: 78
FRP: frp
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:35
Done.
 
Exe version: Nck Online AndroidMTK 1.1
Selected model: Huawei Ascend Y5 [MYA-L23]
[auto]Action: Reset FRP
Will be used loader: MYA_L23_DA_SWSEC.bin
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(21) : MediaTek PreLoader USB VCOM (Android) (COM21)
[21] \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: d4:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.
 
FRP Redmi note 10S done!
[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port (COM20) [\\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}]
: MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6785 [0813] Helio G90
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Active] [DAA Active]
MEID : 07B182B93C1FB26CF914DEA716B06E78
SoC ID[0] : C57F8358A57030CAE97139E1C372C1BD
SoC ID[1] : A9223FABD00FA5A9890F4D90D0A6B997
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_k85v1_64.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
UFS CID : AD014839485131354145434D42444152
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
HRID : E397190A38AD385A4B3BCFEECC17CC4E
Int. RAM : 0x0000000000080000 [512,00 KB]
Ext. RAM : 0x0000000180000000 [6,00 GB]
Flash ID : H9HQ15AECMBDAR
CID : AD014839485131354145434D42444152
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000001DCB000000 [119,17 GB]
Reading Parititon Info...OK
Manufacturer : Xiaomi
And. Ver. : 12
Build Dt. : Wed Oct 18 19:33:17 CST 2023
Display ID : SP1A.210812.016
Ver. Inc. : V13.0.16.0.SKLMIXM
Locale : en-GB
Mod. Dev. : rosemary_global
Patch : 2023-10-01
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2]
LOG TXT : 20241127_140543.txt
 
NCK Online Tool [Reset FRP] OK Vsmart Star 5 V352A
Waiting for device...Found
Port Info : MediaTek USB Port (COM6) [\\?\usb#vid_0e8d&pid_0003#5&301cb6ba&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Inactive]
MEID : B9B46D065E41E217503C459D400B54CE
SoC ID[0] : 9E4A140229AE6B09E45B6B809333307F
SoC ID[1] : ED8D5AB788FBA3A80ABEF6C95E67A3E3
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_k65v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
EMMC CID : 880103534C4433324755B21B522FC7C7
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
HRID : B7575BF2F581C51DEFC54E57B021C9C5
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : SLD32G
CID : 880103534C4433324755B21B522FC7C7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x000000073A000000 [28.91 GB]
Reading Parititon Info...OK
And. Ver. : 11
Build Dt. : Wed Dec 29 13:57:44 +07 2021
Ver. Inc. : V352A_OPN_U_A6_211229
Locale : en-US
Patch : 2022-01-01
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2]
LOG TXT : 20241128_010339.txt
 
Exe Version: NCK Samsung Online Tool v0.5
Brand: Samsung QC
Model: Galaxy A52s 5G SM-A528B BIT9
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM25) detected.
Firehose protocol: 2
HW ID: 00002000E1201900
PK HASH: 4A14C27B518909E1D807FEACB4BB617CCBCE1713313BB94BE4 E2D39A2CFAEB2B
using loader: SM_A528B_BIT9.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 118,64 GB Partitions count: 34
Volume[1] Size: 8,11 MB Partitions count: 2
Volume[2] Size: 8,11 MB Partitions count: 2
Volume[3] Size: 4,11 MB Partitions count: 3
Volume[4] Size: 512,11 MB Partitions count: 34
Volume[5] Size: 8,11 MB Partitions count: 2
[01A943FB]Userdata Size: 106,32 GB
Partitions count: 77
FRP: frp
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:41
Done.
 
A235f u7 frp done by edl cable
Code:
Exe Version: NCK Samsung Online Tool v0.5
Brand: Samsung QC
Model: Galaxy A23 SM-A235F Bit7
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM8) detected.
Firehose protocol: 2
HW ID: 00002000E1801B00
PK HASH: CC8F14E97AFA5F36F32D3601D2A7E17615D00ADF52D5BAF93BDF653B77635469
using loader: prog_firehose_ddr_SM-A235F_Bit7.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 118.64 GB Partitions count: 34
Volume[1] Size: 8.11 MB Partitions count: 2
Volume[2] Size: 8.11 MB Partitions count: 2
Volume[3] Size: 4.11 MB Partitions count: 2
Volume[4] Size: 512.11 MB Partitions count: 36
Volume[5] Size: 8.11 MB Partitions count: 2
[01B2C7FB]Userdata Size: 108.7 GB
Partitions count: 78
FRP: frp
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:33
Done.
 
RP Redmi Note 10 5G done!
[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port (COM20) [\\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}]
: MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Active] [DAA Active]
MEID : 86570D9750BCCB0F96242CB1DCEDE33B
SoC ID[0] : 11D7DD96D285D1E066518326145E852B
SoC ID[1] : 9456868EDDF79E60E75034C2472CF91B
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_camellia.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
UFS CID : 2C014D54313238474153414F34553231
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
HRID : 5ECFF888C31AA5DBD9D99B30EF756AC7
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : MT128GASAO4U21
CID : 2C014D54313238474153414F34553231
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000001DCB000000 [119,17 GB]
Reading Parititon Info...OK
And. Ver. : 13
Build Dt. : Tue Sep 19 12:19:01 UTC 2023
Display ID : TP1A.220624.014
Ver. Inc. : V14.0.6.0****SMIXM
Locale : en-GB
Patch : 2023-09-01
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2]
LOG TXT : 20241201_094757.txt
 
NCK Online Tool [Reset FRP] realme_RMX3261 OK

Realme C21Y : NCK Online Tool [Reset FRP] OK

SELECTED: Tiger T610(UMS512)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM21)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 811583 [5e] 1211C711
UID: PAF392_7_14_17
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: realme
Brand: realme
Device: RMX3261
Model: RMX3261
Build ID: RP1A.201005.001
CPU arhitecture: arm64-v8a
Build product name: S19610AA1
Build description: S19610AA1_ctcc-user 11 RP1A.201005.001 41214 release-keys
Product name: RMX3261
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RMX3261_11_A.113
Security patch: 2023-10-05
CPU NAME: T610
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\nckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\realme_RMX3261_11_A_113_erase_fr p.txt
Total Time: 00:00:41
Done.
 
FRP Redmi Note 11 pro plus done!
[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port_V1632 (COM33) [\\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6877 [0959] Dimensity 900/1080
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Active] [DAA Active]
MEID : AB66A764BF2AF13522EA109A777991B6
SoC ID[0] : 748168AB3F3823090D4209D814D8579D
SoC ID[1] : FEBBF73A42BE80513DCF1572F62B087A
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_pissarro.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
UFS CID : CE014B4D3846393030314A4D2D423831
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
HRID : 79BC3027E7C9531558A5BC33FFAD62E6
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000200000000 [8,00 GB]
Flash ID : KM8F9001JM-B81
CID : CE014B4D3846393030314A4D2D423831
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003B96000000 [238,34 GB]
Reading Parititon Info...OK
And. Ver. : 13
Build Dt. : Mon Jul 15 12:28:56 UTC 2024
Display ID : TP1A.220624.014
Ver. Inc. : V816.0.4.0****TMIXM
Locale : en-GB
Patch : 2024-07-01
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.1]
LOG TXT : 20241205_140159.txt
 
FRP Infinix Hot 40i (X6528) done!
SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 7438C0 [5e] 4A51A6
UID: M3S009_9_35_38
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_18.txt
Total Time: 00:00:47
Done.
 
FRP Tecno Spark 6 (KE7) done!
[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port_V1632 (COM20) [\\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 9D0CF038B2965DB73F117A38FEBBA3EB
SoC ID[0] : ACD058FDE506216FEEFB5AFD295BD9FF
SoC ID[1] : 70570B0EF5DD4E7E3A419E0F225D07E2
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_ke7_h693.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
EMMC CID : 90014A6843396150330100A10532C743
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
HRID : D712C06956087F6C12647A6545C0987D
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : hC9aP3
CID : 90014A6843396150330100A10532C743
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
Reading Parititon Info...OK
Manufacturer : TECNO MOBILE LIMITED
Vendor Model : TECNO KE7
Platform : mt6768
Ven. Date : Tue Aug 31 16:47:40 CST 2021
Ver. Inc. : 210831V375
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.1]
LOG TXT : 20241209_104737.txt
 
[4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
Reading Parititon Info...OK
And. Ver. : 11
Build Dt. : Wed Sep 13 13:59:14 CST 2023
Display ID : TECNO-RGo-32-230913V620
Ver. Inc. : 230913V978
Locale : en-US
Patch : 2023-09-05
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.1]
LOG TXT : 20241210_184325.txt
 
FRP ZTE Blade A53 Pro (p963f63) done!
SELECTED: SC9863A_64
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] C330387 [5e] 91D5D7
UID: TMGG66_12_7_7
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_19.txt
Total Time: 00:00:43
Done.
 
Locale : en-US
Patch : 2023-03-05
Reset FRP Data...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.1]
LOG TXT : 20241212_152256.txt
 
SELECTED: SC9863A_64_V2
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] A1C4885 [5e] 913129
UID: TC4Y53_17_17_5
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: realme
Brand: realme
Device: RMX3231
Model: RMX3231
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: RMX3231
Build description: RMX3231-user 11 RP1A.201005.001 478 release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RMX3231_11.A.125
Security patch: 2024-02-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\realme_RMX3231_11_A_125_erase_fr p.txt
Total Time: 00:01:02
Done.
 
SELECTED: Note 50(RMX3834)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 7438C1 [5e] A034F9E
UID: M3S150_13_31_30
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T616
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_22.txt
Total Time: 00:00:56
Done.
 
Exe Version: NCK Samsung Online Tool v0.6
Brand: Samsung QC
Model: Galaxy A20s SM-A207M BIT4
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM25) detected.
Firehose protocol: 2
HW ID: 00002000E1A00900 MSM8953
PK HASH: 1187BA61EF9DD1150ADA91B89AFD7702CA0E2EDAB6220C8CDD 9AE66116FA32B8
using loader: prog_firehose_ddr_A207M_BIT4.elf
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29,12 GB Partitions count: 71
[02DE9FD8]Userdata Size: 22,96 GB
FRP: config
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:07
Done.
 
Vivo Y91c Password unlock success

[Erase Userdata]
Waiting for device...Found
Port Info : MediaTek PreLoader USB VCOM_V1632 (Android) (COM19) [\\?\usb#vid_0e8d&pid_2000#5&212ac8fc&0&7#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: PRELOADER PORT
CUST_DA : INT:VIVO V1
HW ID : MT6765 [0766] Helio P35/G35
HW VER : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 55F8C9610F9DA6D39AFFC3F35279DD2F
SoC ID[0] : A8651865B3A71D53867A098C03E7D0D5
SoC ID[1] : 430026A6C07DA17EF9F3B89F1BA07F08
Sending DA1...Done
Running DA1...Done
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : preloader
Speed : high-speed
Running Exploit (Old)...Done
Sending DA2...OK
Activating DA Extension...Done
HRID : DAFF2B9445CE22974059470846537AA3
SRAM : 0x000000000003A000 [232.00 KB]
DRAM : 0x0000000080000000 [2.00 GB]
EMMC ID : QD63MB
EMMC CID : 150100514436334D42011929D23827DF
BOOT[1] : 0x0000000000400000 [4.00 MB]
BOOT[2] : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Reading Parititon Info...OK
Brand : vivo
Manufacturer : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_1.22.6
Prod. Name : PD1818HF_EX
Build Dt. : Mon Mar 27 23:01:23 CST 2023
Display ID : O11019 release-keys
Ver. Inc. : 1679929289
Locale : en-US
Patch : 2021-10-01
Formating Userdata...Done
Process finished
LOG TXT : 20241223_185746.txt
 
Exe Version: NCK Samsung Online Tool v0.6
Brand: Samsung QC
Model: Galaxy Note10+ SM-N975U BIT8
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM25) detected.
Firehose protocol: 2
HW ID: 00002000E1500A00
PK HASH: 3FD28B75E2557C5D5A80BB6112E8DD0ACAEB6D56A6DC880D3C DBF0F12CF9146B
using loader: prog_firehose_ddr_N975U_BIT8.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 238,26 GB Partitions count: 31
Volume[1] Size: 8 MB Partitions count: 2
Volume[2] Size: 8 MB Partitions count: 2
Volume[3] Size: 60 MB Partitions count: 32
[0390ABDF]Userdata Size: 228,17 GB
Partitions count: 67
FRP: persistent
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:33
Done.
 
You must log in or register to reply here.
Back
Top