Post here successfully operations via NCK Online Tool

Tecno Kd7 (Tecno Spark 5 pro) FRP Remove Done

[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port_V1632 (COM7) [\\?\usb#vid_0e8d&pid_0003#5&212ac8fc&0&7#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 205C2A8AF6959E6ED781FDBCB70C7053
SoC ID[0] : 4D51E956FE1BA6AC460A0D4690A56D4B
SoC ID[1] : 3441BA63F9014C832C64C851E74EA6B9
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_kd7_h6211.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
EMMC CID : 90014A68433861503E02ED3F942C57F7
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E02ED3F942C57F7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Reading Parititon Info...OK
And. Ver. : 10
Build Dt. : Fri Mar 11 02:15:24 CST 2022
Display ID : KD7-H6211FQRSTU-Q-GL-220311V417
Ver. Inc. : FQRSTU-GL-220311V417
Locale : en-US
Patch : 2022-03-05
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.0]
LOG TXT : 20241011_183923.txt
 
FRP Samsung Galaxi a10S Done!
JOB: Reset FRP
Device detected OK.
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Chipset: MTK6765
Data Found, processing...
Closing Session...
Device detected OK.
Bypassing data, wait....
Bypass ok.
Partition size: 0x80000
Restarting Phone
Restart Ok
Done.
 
SELECTED: Note 50(RMX3834)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 743806 [5e] E1AC817
UID: M3P673_11_16_23
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T616
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp.txt
Total Time: 00:00:50
Done.
 
SELECTED: BD4
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 1220808F [5e] 9176E6
UID: TGKV94_2_1_15
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: TECNO MOBILE LIMITED
Brand: TECNO
Device: TECNO-BD4
Model: TECNO BD4
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: BD4
Build description: BD4-user 11 RP1A.201005.001 213 release-keys
Transsion device name: TECNO POP 5 LTE
Build Id: RP1A.201005.001
Android Release: 11
Android Version: BD4-SE656BCEF-RGo-OP-220512V11
Security patch: 2022-04-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\TECNO_BD4-SE656BCEF-RGo-OP-220512V11_erase_frp.txt
Total Time: 00:00:50
Done.
 
[Enable ADB (META)]
Checking for exisitng META Port...No Device!
Connect USB Cable to powered off device
Some devices need you to hold VOL UP/DOWN when connecting.
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM (Android) (COM10)
Connecting Device...OK Authenticated
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM12)
Brand : TECNO
Model : TECNO LH7n
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Wed Apr 16 22:04:47 CST 2025
Ven. Date : Wed Apr 16 21:21:04 CST 2025
Platform : MT6789
OEM : unknown
OEM Device : unknown
Disp. ID : LH7n-H894JKLM-U-GL-250416V781
Inc. Ver. : 250416V654
Patch Level : 2025-04-05
OTA Ver. : unknown
Brand : TECNO
Model : TECNO LH7n
Build : LH7n-H894JKLM-U-GL-250416V781
Build Date : Wed Apr 16 22:04:47 CST 2025
Enabling ADB...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.6]
LOG TXT : 20250518_135552.txt


[Reset FRP (ADB)]
Searching for Device..Found
Brand : TECNO
Model : TECNO LH7n
Android Ver. : 14
Build : LH7n-H894JKLM-U-GL-250416V781
Build Date : Wed Apr 16 22:04:47 CST 2025
Patch Level : 2025-04-05
Bootloader : unknown
Resetting FRP Lock...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.6]
LOG TXT : 20250518_135826.txt
 
[Reset FRP (ADB)]
Searching for Device..Found
Brand : TECNO
Model : TECNO BF7
Android Ver. : 12
Build : BF7-H6127ABCDSTUAdAeAfArAs-S-GL-241209V2366
Build Date : Mon Dec 9 21:30:33 CST 2024
Patch Level : 2024-12-05
Bootloader : unknown
Resetting FRP Lock...Done
Process finished
[NCK Online MTK Exploit Tool v0.2.7]
LOG TXT : 20250525_125258.txt
 
You must log in or register to reply here.
Back
Top