Post Here successful reports with Avengers Box

ecno in-5 FRP Reset done
https//i.imgur.com/zutRh6e.png[/img]']

Tecno-i3 Dump scatter file done
Action : Read Firmware.
Selected Tecno:I3
Exe version: Avengers Box MTK 0.6.1
Will be used loader: DA_PL_TI3.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100514531334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
Build ID: NRD90M
Display ID: i3-H375C1-N-IN-180131V300
Version: 7.0
Build Date: Wed Jan 31 18:41:25 CST 2018
Model: TECNO i3
Brand: TECNO
Device: TECNO-i3
Manufacturer: TECNO
Mediatek Version Release: i3-H375C1-N-IN-180131V300
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 911565256622663
IMEI[2] from NVRAM: 911565256622671
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro
Reading: BEGIN: 0x5200000 - LEN: 0x600000
[6013]ReadbackPartitionToBuffer fail!: To download SEC_RO is forbidden in this phone.
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x126800000
Saved to : C:\Users\sunnyck\Documents\Android_MTK\firmware_ba ckup\MT6737M_EMMC_TECNO_TECNO i3_7_0_i3-H375C1-N-IN-180131V300(2019_04_27_16_49)
Wait untill phone will start charging.
[0]All done.

Lenovo A6600d40 FRP Reset Done

Rivo A280

---

EXE VERSION: Avenger MTK Tool 0.3
Com port opened...Press power on
Conected ok with target ...
Reopen comport(COM10)
BaseBand CPU : MT6261
SW_VER : M1_M61A_v1d0_qvga_BAILI_Q512_PAKISTAN_RIVO_Eng_Ara _Per_Urdu_v1.2
HW_VER : FARSIGHTED61A_CN_11C_HW
Meta mode conected ok, start reading phone....
User code(Inactive) : 78680
META END OK.
All done.

VGOTel i550 Read User Code Done

---

EXE VERSION: Avenger MTK Tool 0.3
Com port opened...Press power on
Conected ok with target ...
Reopen comport(COM10)
BaseBand CPU : MT6261
SW_VER : MAUI.11C.W13.52.MP.V2.F45
HW_VER : FISE61D_11C_HW
Meta mode conected ok, start reading phone....
User code(Inactive) : 5426
META END OK.
All done.

Qmobile Noir i5 Flashing Done

---

Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: Avengers Box MTK 0.6.0
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930
EMMC FW VERSION: 51:00:00:00:00:00:00:00
EMMC CID: 110100303034473930 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM16)
Preloader backup already exist, skip saving.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.

Phone must be on, USB debugging must be enabled.
If Phone ask,accept authorization on screen.
Found Device:HEKNU18412107894
Model: AGS-L09
Platform Id: msm8937
OS Version: 7.0
Build Id: HUAWEIAGS-L09
Build version: AGS-L09C100B256
(GSM)RIL VERSION: Qualcomm RIL 1.0
Resetting FRP, wait....
Reset Done.

Exe version: Avengers Box MTK 0.6.0
Selected model: 0-By CPU ELBRUS
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6570 0 ca00
Using Algo 1.
Helio MT6570 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6570
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100464E3632 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Starting helio frp, not disconnect phone untill done
[HELIO]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

Alcatel OT-1052G Unlock done

USB Connection selected.
EXE VERSION: Avenger MTK Tool 0.3
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM11
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 014617005
IMEI[2]: 014617005
Start read, wait....
Block1[N]: Locked (remain:2) Code : 12345678
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
Unlock file done
Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

EXE: Avengers Spreadtrum Module 0.8
SELECTED: SC6531E
ACTION: Read PhonePassword
Start Detect phone...
Detected: SCI USB2Serial (COM52)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.2
Changing bautrate OK.
Send Second Loader.
Flash ID: [EF4016] WINBOND: [0x400000]W25Q32FV size: 0x400000
SN: 05789683489920
EFS Start: 3C8000 Size: 0x38000
[6][21D]Password: 123456
[6][33F]Password: 123456
[6][33E]Password: 123456
Total Time: 00:00:29
Done.

z70 frp reset done

Flash files count is :4
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: Avengers Box MTK 0.5.9
Scenario: [0]Safe Flash
Will be used loader: DA_SWSEC.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM11)
Boot mode: Brom
BBCHIP: 335 0 ca00
Using Algo 2.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100514531334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM72)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

Huawei TIT-AL00 Frp

---

Code:
Exe version: Avengers Box MTK 0.6.6
Selected model: Huawei Ascend Y6 Pro[TIT-AL00] ME
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

tecnopop 2f reset ok

Action : Reset to factory default.
Selected Model: 0-By CPU:ELBRUS
Exe version: Avengers Box MTK 0.6.6
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[78]Detected: MediaTek PreLoader USB VCOM_V1632 (Android) (COM78)
\\?\usb#vid_0e8d&pid_2000#5&f86e282&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[136]META Port Detected: MediaTek USB VCOM (Android) (COM136)
USB\VID_0E8D&PID_2007\5&F86E282&0&3
Start sync target, waiting responce.....
ChipID: MT6580,S01
[MT6580,S01]Using Algo 1
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[0]All done.

Alcatel Ot-3075M Read code Done

---

Qmobile E750

---

EXE VERSION: Avenger MTK Tool 0.3
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM10
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM10)
BaseBand CPU : MT6252
SW_VER : 1517Q_0201_V2004
HW_VER : GIONEE52_12864_OVERSEA_11B_HW
Meta mode conected ok, start reading phone....
User code(Inactive) : 5426
META END OK.
All done.

ZTE-T815 Direct unlock done

https//i.imgur.com/EfFdpQP.png[/img]']

HTC_Desire D820PI_MT6592_Dual_SIM flash done

https//i.imgur.com/VOF6Cyp.png[/img]']

htc d820pl imei repair done

https//i.imgur.com/9HgJsmq.png[/img]']

INTEX_AQUA_LIONS_N1 flash done

https//i.imgur.com/slVQRfy.png[/img]']