Post here successfully operations via NCK Online Tool

a01 core A015m Frp done By NCK Samsung online tool

Exe Version: NCK Samsung Online Tool v0.4
Brand: Samsung QC
Model: Galaxy A01 (SM-A015M) BIT5
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM10) detected.
Firehose protocol: 2
HW ID: 00002000E1F00B00
PK HASH: B9D0DD5F5A3A9494EB7F47A9702F9FB91D7A9FD8125A1CE3A8 4E3D17781821C1
using loader: prog_emmc_firehose_8937_ddr_A015M_BIT5.mbn
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8937
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29.12 GB Partitions count: 80
[03032FD8]Userdata Size: 24.1 GB
FRP: config
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:12
Done.

a03 core a032m FRP done By NCK Unisoc Online Tool

SELECTED: SM-A032M
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 1236030A [5e] 91BA24
UID: TKXT96_24_6_10
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032M
Build ID: TP1A.220624.014
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3coreub-user 13 TP1A.220624.014 A032MUBS3CXA2 release-keys
Build Id: TP1A.220624.014
Android Release: 13
Android Version: TP1A.220624.014.A032MUBS3CXA2
Security patch: 2023-12-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\samsung_TP1A_220624_014_A032MUBS 3CXA2_erase_frp.txt
Total Time: 00:00:43
Done.

a32 a325m frp done By NCK Samsung Online tool

JOB: Reset FRP
Device detected OK.
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Chipset: MTK6769T
Data Found, processing...
Closing Session...
Device detected OK.
Bypassing data, wait....
Bypass ok.
Partition size: 0x80000
Restarting Phone
Restart Ok
Done.

Nokia C01 Plus frp Done By NCK Unisoc online Tool

SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 1209CC0A [5e] 9137A2
UID: TCNR91_7_24_10
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: HMD Global
Brand: Nokia
Device: IRS
Model: Nokia C01 Plus
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: IRS
Build description: T19545AA1_general-user 11 RP1A.201005.001 26636 release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: 00WW_1_230_SP02
Security patch: 2022-07-05
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\Nokia_00WW_1_230_SP02_erase_frp. txt
Total Time: 00:00:43
Done.

REALME C30s Factory Reset and FRP Done...

REALME C30s RMX3690
FACTORY Reset and FRP Done (with tenacity)

-Phone Reset

Action: Reset Phone.
Detecting phone, wait...
Using connection mode 1
Detected: SPRD U2S Diag (COM4)

Platform Version: MOCORTM_22A_W23.02.5_P1_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_22A_W23.02.5_P1
HW Version: sc9863A_modem
01-31-2023 12:12:07
Build number: RMX3690_12.A.42
EMMC DDR SIZE :29.00 GB+2.00 GB
UID: 0091b4a00e344f0d
AT UID: W+SPGETUID: cdfbe3378b5a4a28f1594435b8a863ee987b19bf914587f398 1a6a079e48c19e

IMEI 1: 860936066945084
IMEI 2: 860936066945076
IMEI 3: 867400020316638
IMEI 4: 867400020316646
DONE
DONE
DONE
DONE
Done.
Exe version: Unisoc Module 2.3.1

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=

-FRP I choose Model to
-GENERIC
-SC9863A_64_V2 (All 3 Option has Failed (Error send payload.) except this one)

SELECTED: SC9863A_64_V2
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM4)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] E344F0D [5e] 91B4A0
UID: TKBP76_17_30_13
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.

A20S A207m FRP Done BY NCK Qualcomm online tool!

Exe Version: Nck Qualcomm Online Module 0.1
Brand: Samsung
Model: Galaxy A20s SM-A207M BIT4
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM3) detected.
Firehose protocol: 2
HW ID: 00002000E1A00900 MSM8953
PK HASH: 1187BA61EF9DD1150ADA91B89AFD7702CA0E2EDAB6220C8CDD 9AE66116FA32B8
using loader: prog_firehose_ddr_A207M_BIT4.elf
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29.12 GB Partitions count: 71
[02DE9FD8]Userdata Size: 22.96 GB
FRP: config
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\PC1\Documents\qualcomm\qualcomm_module\qc _module_Logs\reset_frp_MSM8953_00002000E1A00900_11 87BA61EF9DD1150ADA91B89AFD7702CA0E2EDAB6220C8CDD9A E66116FA32B81.txt
Total Time: 00:00:12
Done.

FRP Infinix Smart 8 (X6525) Done!

SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 743586 [5e] E0E4891
UID: M3F671_25_17_17
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_1.txt
Total Time: 00:01:09
Done.

FRP ZTE v50 done!
SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 742A40 [5e] 484BA3
UID: M2Y009_1_23_35
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_3.txt
Total Time: 00:00:53
Done.

Exe Version: NCK Samsung Online Tool v0.4
Brand: Samsung QC
Model: Galaxy A11 SM-A115M BIT 5
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM7) detected.
Firehose protocol: 2
HW ID: 00002000E1A00900 MSM8953
PK HASH: 084E868B048512D828C51A78A9251ECE3C48313FF498FA6F18 335E9F56C276BD
using loader: prog_firehose_ddr_A115M_BIT5.elf
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 58,24 GB Partitions count: 80
[068887D8]Userdata Size: 52,27 GB
FRP: config
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:06
Done.

FRP ZTE Blade A34 done!
SELECTED: SC9863A_64_V2
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 64E4396 [5e] 743809
UID: M3P939_25_7_22
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_4.txt
Total Time: 00:00:48
Done.

Exe Version: Nck Qualcomm Online Module 0.1
Brand: Xiaomi
Model: Poco X3 NFC surya
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM7) detected.
Firehose protocol: 2
HW ID: 00007200E1600E00
PK HASH: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4 358EC9D79CDA46
using loader: prog_ufs_firehose_sm7150_ddr_Pocophone_X3_NFC_sury a.elf
Arhitecture:64 bits
[64]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
Requesting offline authentification.
[19]Autorization success.
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 114,9 GB Partitions count: 16
Volume[1] Size: 8,11 MB Partitions count: 3
Volume[2] Size: 8,11 MB Partitions count: 3
Volume[3] Size: 128,11 MB Partitions count: 4
Volume[4] Size: 4 GB Partitions count: 48
Volume[5] Size: 128,11 MB Partitions count: 6
[01A34DE3]Userdata Size: 104,83 GB
Partitions count: 80
FRP: frp
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\rodrigo\Documents\qualcomm\qualcomm_modul e\qc_module_Logs\reset_frp__00007200E1600E00_1BEBE 3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC 9D79CDA461.txt
Total Time: 00:00:18
Done.

oppo a1k frp done

[Reset FRP]
Waiting for device...Found
Port Info : MediaTek USB Port_V1632 (COM7) [\\?\usb#vid_0e8d&pid_0003#5&212ac8fc&0&7#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: BROM PORT
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 1C3FD18FBC0341CDE5B7528F792F378E
SoC ID[0] : A945692EFC023825D23D4721AB178905
SoC ID[1] : DA2663FC9A1AF240592FFAC2E1B6B41D
Executing Exploit...Done
Reading Preloader...OK
Saved as : preloader_oppo6762_18540.bin
Loading EMI Config from Preloader...OK
Sec. Cfg : [SBA Inactive] [SLA Inactive] [DAA Inactive]
Sending DA1...OK
Running DA1...OK
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : brom
Speed : HIGH-SPEED
Reading EMI Configuration...OK
EMMC CID : 150100515836334142093CBFD0DB57AF
Sending EMI Config...OK
Sending 2nd DA...OK
Activating DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QX63AB
CID : 150100515836334142093CBFD0DB57AF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Reading Parititon Info...OK
Manufacturer : OPPO
And. Ver. : 9
Locale : en-US
Patch : 2021-05-05
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.0]
LOG TXT : 20241029_205651.txt

FRP SM-A155M Done!
JOB: Reset FRP
Device detected OK.
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Chipset: MT6789
Data Found, processing...
Closing Session...
Device detected OK.
Bypassing data, wait....
Bypass ok.
Partition size: 0x80000
Restarting Phone
Restart Ok
Done.

SELECTED: POP7(BF6)
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM50)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 61C8C90 [5e] 91D15E
UID: TM5N33_18_25_16
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.2
Log saved:
C:\NckTeam\unisoc_module\spreadtrum_module_backup_ folder\Saved_Logs\_erase_frp_6.txt
Total Time: 00:00:47
Done.

frp reset done

[Reset FRP]
Waiting for device...Found
Port Info : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3) [\\?\usb#vid_0e8d&pid_2000#5&212ac8fc&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
: PRELOADER PORT
HW ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
HW VER : 8A00,CA01,0200
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : AE120C24ED0A53A6579A7EA4DB30FB8A
SoC ID[0] : F76E58BA941BCEF0DF97C57E4F254B97
SoC ID[1] : 9F5F11073BD22DF4D60056AC8293A23F
Sending DA1...Done
Running DA1...Done
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : preloader
Speed : high-speed
Running Exploit (Old)...Done
Sending DA2...OK
Activating DA Extension...Done
SRAM : 0x000000000003A600 [233.50 KB]
DRAM : 0x0000000100000000 [4.00 GB]
EMMC ID : DP6DBB
EMMC CID : 1501004450364442420259F5CED3B83D
BOOT[1] : 0x0000000000400000 [4.00 MB]
BOOT[2] : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Reading Parititon Info...OK
And. Ver. : 11
Build Dt. : Mon Jun 19 19:18:56 CST 2023
Display ID : INFINIX-R-64-230619V416
Ver. Inc. : 230619V694
Locale : en-US
Patch : 2023-05-05
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.0]
LOG TXT : 20241031_145950.txt

Itel S23 (S665L) FRP Remove Done

SELECTED: Tiger T606 Ver2
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM10)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 7429C9 [5e] 33C392
UID: M2W906_15_7_18
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.3.1
Log saved:
C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_13.txt
Total Time: 00:00:45
Done.

Exe Version: NCK Samsung Online Tool v0.4
Brand: Samsung QC
Model: Galaxy A11 SM-A115M BIT 2
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM7) detected.
Firehose protocol: 2
HW ID: 00002000E1A00900 MSM8953
PK HASH: 084E868B048512D828C51A78A9251ECE3C48313FF498FA6F18 335E9F56C276BD
using loader: prog_firehose_ddr_A115M_BIT2.elf
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29,12 GB Partitions count: 82
[02E4A7D8]Userdata Size: 23,15 GB
FRP: config
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:07
Done.

FRP Samsung SM-A025M (bit 9) done!
Exe Version: NCK Samsung Online Tool v0.4
Brand: Samsung QC
Model: Galaxy A02s SM-A025M BIT8
Operation: Reset FRP
How to connect phone:
1. With phone off enter edl mode keep pressing vol+ and vol- buttons and insert usb cable
2. If this metod not work, use edl cable to force emergenty download mode.
3. If this metod not work, use testpoint to force emergenty download mode.
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM7) detected.
Firehose protocol: 2
HW ID: 00002000E1A00900 MSM8953
PK HASH: 3CCEFAE4CACF8160EF95A9C7D10C9AA7AA7E9664B75C5238DF 67A3C4E273BEE2
using loader: prog_firehose_ddr_A025M_BIT8.elf
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[0] Send NOP ok, loader start.
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 58,24 GB Partitions count: 80
[067F27D8]Userdata Size: 51,97 GB
FRP: config
Erasing Samsung FRP, wait.....
Erasing FRP, finished
Restarting phone.....
Total Time: 00:00:06
Done.

Exe version: NCKDongle AndroidMTK 2.8.3
Selected model: Motorola Moto E6 S
[auto]Action: Reset FRP
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(9) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
[9] \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 13014E53304A39 : 000000000000000000
EMMC UA SIZE: 0xe8f800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe91000000 [58.266 GB]
[EMMC]FORMAT
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

frp done by king nck online tool

---

Android Version: L6503-F6315-10.0-OP-V049-20221213
Security patch: 2022-12-05
This phone have frp partition.
CPU NAME: SC9863A
Removing frp, wait...
[0]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NCK Unisoc Online Tool 0.1
Log saved:
C:\nck_unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\Itel_s9863a1h10_go_32b_L6503-F6315-10_0-OP-V049-20221213_erase_frp.txt
Total Time: 00:00:46
Done.