★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

11-05-25 12:59 #201

Fast Unlocking

Administrator

lenovo-a6000 bootloder unlock done
https://i.imgur.com/Hqxhnjk.png[/img]"]

Lenovo -A6000 Flash done
https://i.imgur.com/3jXRzLw.png[/img]"]

11-05-25 13:01 #202

Fast Unlocking

Administrator

lenovo-a6000 bootloder unlock done
https://i.imgur.com/Hqxhnjk.png[/img]"]

Lenovo -A6000 Flash done
https://i.imgur.com/3jXRzLw.png[/img]"]

11-05-25 13:01 #203

Fast Unlocking

Administrator

J510fn frp done

Model : A310F
Operation : FRP Reset (Format UD)
Searching for Phone...Found
Port: : COM859 : SAMSUNG Mobile USB Modem #158
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J510FN
IMEI: : 357656084741188
Software: : J510FNXXU2BRJ4/J510FNDBT2BRJ1/J510FNXWU2BRG1/J510FNXXU2BRJ4
Product : DBT
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM647 : SAMSUNG Mobile USB Modem #28
Reading Data from Phone...Done
Chipset : MSM8916 [HiSpeed]
Loading Data...Done
Sending Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:45
Module Ver. 0.2
LOG Saved to !Logs\190410_095054.log

11-05-25 13:01 #204

Fast Unlocking

Administrator

Jio F220B [msm8909] Lock Reset Done !!

Code:

Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1400900 [8909] 00003901
OPK_DATA    : C19048C0FDDF2AB99830D7AE4862F9B4EF1CC989CA31AE00D9296B7F64DC3957
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_054]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8909, eMMC, 4 GB
LU Count    : 1 [0x0074C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Jio F220B [msm8909]
Software    : LYF-F220B-003-01-26-110119, LYF-F220B-003-01-26-110119 [Fri Jan 11 11:01:36 CST 2019]
Android Ver.    : 6.0.1
Patch Level    : xxxx-xx-xx
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:01 #205

Fast Unlocking

Administrator

Redmi Y1 Lite Factory File Write Done !!

Code:

Operation    : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, eMMC, 16 GB
LU Count    : 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system.img ] -> [system]...Done
Writing [cache.img ] -> [cache]...Done
Writing [persist.img ] -> [persist]...Done
Writing [config.bin] -> [config] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:02 #206

Fast Unlocking

Administrator

Mi Account Remove Done Success

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953]
Software : N2G47H, V10.1.2.0.NDAMIFI [Tue Nov 6 20:22:29 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-07-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:02 #207

Fast Unlocking

Administrator

Anti Relock Done

Operation : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device...Found
Brand : Xiaomi
Model : Redmi 5
Product : rosy
Device : rosy
Andriod Ver. : 7.1.2
Patch Level : 2018-07-01
Bootloader : unknown
Build ID : N2G47H
Build Date : Tue Nov 6 20:22:29 WIB 2018
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:02 #208

Fast Unlocking

Administrator

LYF-F90M Hang on logo recover Done with Write Flash !!

Code:
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00000000
OPK_DATA : 40EC2E6F16D8D2FF04813324C69AAE78DABE3BDC649086A37100C9F00E237215
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_037]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00748000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:02 #209

Fast Unlocking

Administrator

VIVO Y51 [msm8916] Password Remove Done !!

Code:
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo Y51 [msm8916]
Software : LRX22G release-keys, eng.compiler.20171201.164954 [Fri Dec 1 16:53:32 CST 2017]
Android Ver. : 5.0.2
Patch Level : 2017-11-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:03 #210

Fast Unlocking

Administrator

LAVA Z60 FRP Reset Done !!

Code:
Brand : Lava
Model : Z60
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM9)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : LAVA
Manufacturer : LAVA
Model : Z60
Prod. Name : Z60
Device : Z60
Board : Z60
Platform : mt6737m
Android Ver. : 7.0
Display OS : Z60_OS4.1
Display ID : LAVA_Z60_1_16_V1.0_S129_20171113_ENG_IN
Patch Level : 2017-09-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.7]

11-05-25 13:03 #211

Fast Unlocking

Administrator

G925t frp done

Model : G925T
Operation : Reset FRP (UART)
Searching for Phone...Found
Port: : COM499 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Waiting for user to select UART Port...
Port : COM112 : Z3X BOX Serial Port (COM112)
Keep holding VOL DOWN + POWER button...Phone Found, LEAVE Buttons NOW!
Preparing Device...Done
Resetting FRP Data...Done
Resetting Samsung Account Data...Done
Resetting EE Data...Done
Operation Finished.
Elapsed Time 00:33
Module Ver. 0.2
LOG Saved to !Logs\190429_180434.log

11-05-25 13:03 #212

Fast Unlocking

Administrator

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_190228, 1480422943 [Thu Feb 28 00:42:27 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.0

11-05-25 13:03 #213

Fast Unlocking

Administrator

SM-J250F Frp reset done

Operation : Generic ADB FRP Reset
Searching for Device...Found
Brand : samsung
Model : SM-J250F
Product : j2y18lte
Device : j2y18lte
Andriod Ver. : 7.1.1
Patch Level : 2019-02-01
PDA : J250FXXS2ASB1
Bootloader : FA71_J250FXXU2ARD2
Build ID : NMF26X.J250FXXS2ASB1
Build Date : Sat Feb 16 20:13:44 KST 2019
Resetting FRP Lock...Done
Operation Finished.
UltimateFRP Ver. 0.3

11-05-25 13:03 #214

Fast Unlocking

Administrator

vivo y55s reset locks done without data loss

Device : Vivo V1
Operation : Reset Locks (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM171)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1610 [msm8937]
Software : MMB29M release-keys, eng.compiler.20190227.121058 [Wed Feb 27 12:15:57 CST 2019]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
USERDATA : Encrypted
Reading Extended Information...OK
Model : vivo 1610
Product : PD1613BF_EX
Cust. Name : PD1613BF_EX-IN
Version : PD1613BF_EX_A_1.19.2
Resetting Locks (Vivo)...Done
Please wait for phone to reboot.
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:03 #215

Fast Unlocking

Administrator

vivo y95 formate+frp done

Device : Vivo Y95
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM126)
Driver Info : Lenovo Inc., leusbser.sys, 2.0.9.6
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1807
Software : OPM1.171019.026 release-keys, eng.compil.20190426.232007 [Fri Apr 26 23:20:07 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-04-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:04 #216

Fast Unlocking

Administrator

Xiaomi Redmi 5 Plus mi account done

Operation : Disable Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM126)
Driver Info : Lenovo Inc., leusbser.sys, 2.0.9.6
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 Plus [msm8953]
Software : ZQL1711-vince-build-20180206100234, V9.2.9.0.NEGMIEK [Tue Feb 6 10:02:32 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-01-01
Reading Data...
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:04 #217

Fast Unlocking

Administrator

Lenovo TB2-X30F frp done

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM612)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1809600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_050]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo TB2-X30F [msm8909]
Software : TB2-X30F_S000113_160816_ROW, TB2-X30F_S000113_160816_ROW [Tue Aug 16 17:30:30 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:04 #218

Fast Unlocking

Administrator

Vivo Y83 Pro Pattern Lock remove done without data loss

Brand : Vivo
Model : Y83 Pro
Operation : Reset Locks (Vivo)
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM8)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1726
Prod. Name : PD1803F_EX
Device : PD1803F_EX
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2019-04-05
Userdata is ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- Disconnect phone and hold Volume UP + Power to enter Fastboot.
- Press Volume Down to select Recovery and press Power Button.
- Wait for phone to start.
[UltimateMTK Ver. 2.0]

11-05-25 13:04 #219

Fast Unlocking

Administrator

Alcatel TCL 9001D Hang On Logo Done Just Format Fs With UMT

11-05-25 13:04 #220

Fast Unlocking

Administrator

Vivo Y91i Lock Remove W/O Data Lost

Brand : Vivo
Model : Y91
Operation : Reset Locks (Vivo)
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1820
Prod. Name : PD1818HF_EX
Device : PD1818HF_EX
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2019-04-05
Userdata is ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- Disconnect phone and hold Volume UP + Power to enter Fastboot.
- Press Volume Down to select Recovery and press Power Button.
- Wait for phone to start.
[UltimateMTK Ver. 2.0]

Thread	Thread Starter	Forum	Replies	Last Post
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	2	28-08-25 12:07
[06/10/2026] Ultimate Multi Tool Unisoc Module v2.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	0	06-10-26 10:09
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	NCK & UMT Team News Updates	0	25-08-25 13:07
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Online Tool	7	14-09-26 14:27
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Box / Dongle Premium v2	0	12-05-25 19:22