★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

Sticky: ★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

11-05-25 13:04 #221

Administrator

Vivo Y91i Lock Remove W/O Data Lost

Brand : Vivo
Model : Y91
Operation : Reset Locks (Vivo)
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1820
Prod. Name : PD1818HF_EX
Device : PD1818HF_EX
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2019-04-05
Userdata is ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- Disconnect phone and hold Volume UP + Power to enter Fastboot.
- Press Volume Down to select Recovery and press Power Button.
- Wait for phone to start.
[UltimateMTK Ver. 2.0]

11-05-25 13:05 #222

Fast Unlocking

Administrator

Motorola Droid Turbo 2 XT-1585 Frp Done With UMT

11-05-25 13:05 #223

Fast Unlocking

Administrator

Vivo Y95 Lock Remove Done

Device : Vivo Y95
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM19)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1807
Software : OPM1.171019.026 release-keys, eng.compil.20190426.232007 [Fri Apr 26 23:20:07 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-04-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 4.1

11-05-25 13:05 #224

Fast Unlocking

Administrator

vivo y81 -1808 lock reset done

rand : Vivo
Model : Y81
Operation : Reset Locks (Vivo)
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1808
Prod. Name : PD1732F_EX
Device : PD1732F_EX
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2019-03-05
Userdata is ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- Disconnect phone and hold Volume UP + Power to enter Fastboot.
- Press Volume Down to select Recovery and press Power Button.
- Wait for phone to start.
[UltimateMTK Ver. 2.0]

11-05-25 13:05 #225

Fast Unlocking

Administrator

XT1565 frp done

Port : Fastboot Inteface
Baud Rate : Not Applicable
Device : Motorola
Operation : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1565
Boot Ver. : moto-msm8939-80.F5
Baseband : M8936_2150111.36.06.17.03R LUX_VZW_CUST
Software : Blur_Version.26.26.14.lux_verizon.verizon.en.US
IMEI : 990006243852083
CPU : MSM8939
RAM : 2048MB Hynix S8 SDRAM DIE=8Gb
EMMC : 16GB Samsung REV=07 PRV=01 TYPE=57
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model : XT1565
Bootloader : 0x80F5
Baseband : M8936_2150111.36.06.17.03R LUX_VZW_CUST
Build : Blur_Version.26.26.14.lux_verizon.verizon.en.US
Android : 7.1.1
Searching Network Interface... Found
Connecting to device... OK
Model : XT1565
Bootloader : 0x80F5
Baseband : <Read failed>
Build : Blur_Version.26.26.14.lux_verizon.verizon.en.US
Android : 7.1.1
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:27
[Module Ver. 5.3]
Log Saved to Logs\190617_140906.log

11-05-25 13:05 #226

Fast Unlocking

Administrator

itel S42 frp done with test point

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ITEL MOBILE LIMITED itel S42 [itel-S42]
Software : S42-QL1667-8.0-IN-V024-20180315, IN-V024-20180315 [Thu Mar 15 15:45:05 CST 2018]
Android Ver. : 8.0.0
Patch Level : 2018-03-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.3

11-05-25 13:05 #227

Fast Unlocking

Administrator

oppo a71 (1801) formate done

Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47 647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 4.3

11-05-25 13:05 #228

Fast Unlocking

Administrator

OPPO CPH1701 frp done

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27 277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO CPH1701 [msm8937] [CPH1701]
Software : CPH1701EX_11_A.34_180806, eng.root.20180806.181819 [Mon Aug 6 18:20:59 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-05-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.3

11-05-25 13:06 #229

Fast Unlocking

Administrator

vivo 1606 frp done

Operation : Reset Locks (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo PD1628F_EX [msm8937] [PD1628F_EX]
Software : MMB29M release-keys, eng.compiler.20180518.153318 [Fri May 18 15:40:10 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-05-01
USERDATA : Encrypted
Reading Extended Information...OK
Model : vivo 1606
Product : PD1628F_EX
Cust. Name : PD1628F_EX-IN
Version : PD1628F_EX_A_3.0.11
Resetting Locks (Vivo)...Done
Please wait for phone to reboot.
Operation Finished.
QcFire Ver. 4.3

11-05-25 13:06 #230

Fast Unlocking

Administrator

Redmi Note 4 mi account done

Operation : Reset Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20171113213139, V9.0.5.0.NCFMIEI [Mon Nov 13 21:31:37 WIB 2017]
Android Ver. : 7.0
Patch Level : 2017-11-05
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.2

11-05-25 13:06 #231

Fast Unlocking

Administrator

vivo v7plus (1716) lock reset with out data lose

Device : Vivo Z1
Operation : Reset Locks (Vivo)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1716 [msm8953]
Software : N2G47H release-keys, eng.compil.20180528.223559 [Mon May 28 22:35:59 CST 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
USERDATA : Encrypted
Reading Extended Information...OK
Model : vivo 1716
Product : PD1708F_EX
Cust. Name : PD1708F_EX-IN
Version : PD1708F_EX_A_1.17.15
Resetting Locks (Vivo)...Done
Please wait for phone to reboot.
Operation Finished.
QcFire Ver. 4.2

11-05-25 13:06 #232

Fast Unlocking

Administrator

vivo y71 ( 1724) reset locck without data lose

Operation : Reset Locks (Vivo)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1724
Software : OPM1.171019.011 release-keys, eng.compil.20180706.230259 [Fri Jul 6 23:02:59 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-06-01
USERDATA : Encrypted
Reading Extended Information...OK
Model : vivo 1724
Product : PD1731F_EX
Cust. Name : PD1731F_EX_IN_NULL_NULL
Version : PD1731F_EX_A_1.8.2
Resetting Locks (Vivo)...Done
Please wait for phone to reboot.
Operation Finished.
QcFire Ver. 4.2

11-05-25 13:06 #233

Fast Unlocking

Administrator

Alcatel tab a30 [9024w] frp reset done

Brand : Alcatel
Model : 9022X
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM94)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 1D004200
OPK_DATA : AC10AC27F50E643AD67BAF601981022459EAD615007C2765E7 6E9D721E2F3089
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_049.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : TCL 9024W [msm8909]
Software : NMF26F release-keys, vCEE-0 [Thu Oct 26 22:29:56 CST 2017]
Android Ver. : 7.1.1
Patch Level : 2017-11-06
Resetting FRP Lock.......Done
Operation Finished.
UltimateFRP Ver. 0.5

11-05-25 13:07 #234

Fast Unlocking

Administrator

Acer One 7 4g reset frp done

Quote:

Operation : Reset FRP
CPU : MT6735
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM11)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Acer
Manufacturer : Acer
Model : Acer One 7 4G
Prod. Name : Acer_One_7_4G
Device : Acer_One_7_4G
Android Ver. : 8.1.0
Display ID : Acer_20180914
Patch Level : 2018-08-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.1]

11-05-25 13:07 #235

Fast Unlocking

Administrator

nokia 6.1 frp done via edl mode

11-05-25 13:07 #236

Fast Unlocking

Administrator

vivo v5 plus pattern & frp done
Quote:

device : Vivo v5 plus
operation : Format fs
checking for existing devices...not found
turn off phone, hold vol up + vol down and insert usb cable.
Some phones may need special boot cable or testpoint for edl mode.
Found port : Qualcomm hs-usb qdloader 9008 (com45)
driver info : Qualcomm incorporated, qcusbser.sys, 2.1.2.2
connecting to phone...ok
waiting for response...ok
init handshake sequence...ok
hardware id : E1600400 [8953] 00000000
opk_data : 30315ebed1dd09ceaae927cae0ee967076bc178ca33718db4f ff8f02a0e7fad2
initializing protocol...ok
using auto loader selection [1]
preparing loader...done
sending loader [8953_014]...done
executing loader...ok
detecting chip type...ok
hardware : 8953, emmc, 64 gb
lu count : 1 [0x0747c000]
warning! High speed driver is not installed.
Please install driver from qcfire\drivers folder using device manager.
Payload info : In: 65536 [4096], out: 1048576, sector size: 512
reading partition table...ok
reading device information...ok
device : Vivo vivo 1611 [msm8953] [pd1624f_ex]
software : N2g47h release-keys, eng.compil.20190430.175734 [tue apr 30 17:57:34 cst 2019]
android ver. : 7.1.2
patch level : 2019-05-01
formatting userdata [safemode]...done
resetting frp lock......done
operation finished.
Qcfire ver. 4.5

11-05-25 13:07 #237

Fast Unlocking

Administrator

X00TD FRP DONE

11-05-25 13:08 #238

Fast Unlocking

Administrator

YU YU4711 [msm8916] Reset FRP Done

Code:
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : YU YU4711 [msm8916] [YU4711]
Software : LMY47V.YU_YU4711_SW_V1.0.0_HW_V1.0_010816, YU_YU4711_SW_V1.0.0_HW_V1.0_010816 [Mon Aug 1 12:07:02 CST 2016]
Android Ver. : 5.1.1
Patch Level : 2015-11-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.5

11-05-25 13:08 #239

Fast Unlocking

Administrator

VIVO 1610 [msm8937] Resetting FRP Lock Done !!

Code:
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1610 [msm8937] [PD1613BF_EX]
Software : MMB29M release-keys, eng.compiler.20190227.121058 [Wed Feb 27 12:15:57 CST 2019]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.5

11-05-25 13:08 #240

Fast Unlocking

Administrator

Xiaomi Redmi Note 5A Resetting FRP Lock Done !!

Code:
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937] [ugglite]
Software : N2G47H, V9.2.6.0.NDFMIEK [Thu Feb 8 18:48:46 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-01-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.5

Join NCK Forum — it's free

✔ Ask questions and get answers from experienced technicians
✔ Download files and attachments
✔ Follow official NCK, UMT and Avengers updates
✔ Mark solutions and earn reputation

836 members · 0 solved problems · 6 posts this week

Similar Threads

Thread	Thread Starter	Forum	Replies	Last Post
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	2	28-08-25 12:07
[06/10/2026] Ultimate Multi Tool Unisoc Module v2.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	0	06-10-26 10:09
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	NCK & UMT Team News Updates	0	25-08-25 13:07
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Online Tool	7	14-09-26 14:27
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Box / Dongle Premium v2	0	12-05-25 19:22

Bookmarks

Facebook X / Twitter Telegram WhatsApp

« Previous Thread | Next Thread »