★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

ANS L50 FRP DONE

G930v 8.0 screen lock reset done

---

Model : Samsung
Operation : Remove Android Locks
Searching for Device...Found
Brand : Verizon
Model : SM-G930V
Product : heroqltevzw
Device : heroqltevzw
Andriod Ver. : 8.0.0
Patch Level : 2018-04-01
PDA : G930VVRU4CRE5
Bootloader : G930VVRU4CRE5
Build ID : R16NW.G930VVRU4CRE5
Build Date : Sat May 26 11:26:16 KST 2018
Checking Root Status...Done
Root : Root [Unsecured ADB]
Removing Android Locks...Done
Rebooting device...Done
Operation Finished.
Elapsed Time 00:05
Module Ver. 0.2

G928f frp done

---

Model : G928F
Operation : Reset FRP (UART)
Searching for Phone...Found
Port: : COM31 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Waiting for user to select UART Port...
Port : COM112 : Z3X BOX Serial Port (COM112)
Keep holding VOL DOWN + POWER button...Phone Found, LEAVE Buttons NOW!
Preparing Device...Done
Resetting FRP Data...Done
Resetting Samsung Account Data...Done
Resetting EE Data...Done
Operation Finished.
Elapsed Time 00:33
Module Ver. 0.2

G935f frp done

---

Model : G935F
Operation : Reset FRP (UART)
Searching for Phone...Found
Port: : COM31 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Waiting for user to select UART Port...
Port : COM112 : Z3X BOX Serial Port (COM112)
Keep holding VOL DOWN + POWER button...Phone Found, LEAVE Buttons NOW!
Preparing Device...Done
Resetting FRP Data...Done
Resetting Samsung Account Data...Done
Resetting EE Data...Done
Operation Finished.
Elapsed Time 00:31
Module Ver. 0.2

N920t frp done

---

Model : N920T
Operation : FRP Reset (Format UD)
Searching for Phone...Found
Port: : COM56 : SAMSUNG Mobile USB Modem #55
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-N920V
IMEI: : 990005898629259
Software: : N920VVRS3BQB1/N920VVZW3BQB1/N920VVRS3BQB1/N920VVRS3BQB1
Product : XXXXXXXXXXXVZW
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM31 : SAMSUNG Mobile USB Modem #2
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Loading Data...Done
Sending Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:47
Module Ver. 0.2

MI-Redmi-S2 Format FS Done

Device : Xiaomi Redmi S2
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi S2 [ysl]
Software : OPM1.171019.011, V10.0.5.0.OEFMIFH [Sat Sep 29 23:47:35 WIB 2018]
Android Ver. : 8.1.0
Patch Level : 2018-09-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.7.3

QMobile Z8 FRP Lock......Done

---

Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : QMobile Z8 QMobile Z8 [msm8916] [l5510]
Software : LRX22G release-keys, eng.android.20150825 [Tue Aug 25 09:46:27 CST 2015]
Android Ver. : 5.0.2
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.9

TAMBO TA-1 frp reset done

---

Operation : Reset FRP
CPU : MT6739
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : TAMBO
Manufacturer : TAMBO
Model : TA-1
Prod. Name : TA-1
Device : TA-1
Android Ver. : 8.1.0
Display ID : TA-1_Go_V09_Indian
Patch Level : 2018-08-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.3]

Vivo Y17 reset lock done..

---

Brand : Vivo
Model : Y17
Operation : Reset Locks (Vivo)
..\..\flashtool\Utility\LogFilesClean.cpp,38)
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : Android Gadget VCOM Driver (COM41)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1902
Prod. Name : PD1901F_EX
Device : PD1901F_EX
Android Ver. : 9
Display ID : PPR1.180610.011 release-keys
Patch Level : 2019-09-05
Userdata is ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- Disconnect phone and hold Volume UP + Power to enter Fastboot.
- Press Volume Down to select Recovery and press Power Button.
- Wait for phone to start.
[UltimateMTK Ver. 2.3]

XT1254 Resetting FRP... done

---

Port : Fastboot Inteface
Baud Rate : Not Applicable
Device : Motorola
Operation : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1254
Boot Ver. : moto-apq8084-70.96
Baseband : MDM9625_41.51.07.22.04R QUARK_CUST
Software : Blur_Version.24.91.5.quark_verizon.verizon.en.US
IMEI : 990005111052586
CPU : APQ8084 ES1.1
RAM : 3072MB Samsung S8 SDRAM DIE=6Gb
EMMC : 32GB Samsung REV=07 PRV=0B TYPE=57
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model : XT1254
Bootloader : 0x7096
Baseband : MDM9625_41.51.07.22.04R QUARK_CUST
Build : Blur_Version.24.91.5.quark_verizon.verizon.en.US
Android : 6.0.1
Searching Network Interface... Found
Connecting to device... OK
Model : XT1254
Bootloader : 0x7096
Baseband : MDM9625_41.51.07.22.04R QUARK_CUST
Build : Blur_Version.24.91.5.quark_verizon.verizon.en.US
Android : 6.0.1
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 03:02
[Module Ver. 5.4]
Log Saved to Logs\191111_105904.log

Lenovo Z6 Pro L78051 android 9.0 Resetting FRP Done! With adding custom loader

Device : Lenovo K6 Note
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500A00 [SD855] 00000000
OPK_DATA : A7AEDB6A978006152C0CDB52C7FA75A8ECE30BEED1C22F97C3 1989DB62939819
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Detecting Chip Type...OK
Using Alternate Method...
Hardware : SD855, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 1048576, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Lenovo Lenovo L78051 [zippo]
Software : PKQ1.190110.001 dev-keys, 11.0.284_190810 [Sat Aug 10 05:22:54 CST 2019]
Android Ver. : 9
Patch Level : 2019-07-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.9.1

Vivo Y53 Lock and FRP Remove Done

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM63)
Driver Info : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo PD1628F_EX [msm8937] [PD1628F_EX]
Software : MMB29M release-keys, eng.compiler.20190105.211334 [Sat Jan 5 21:20:28 CST 2019]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.9.1

Lenovo Phab 2 FRP reset Done By UMT MTK Tool

vivo 1812 passcode

---

Operation : Factory Reset (New)
Checking for existing META ports...
Found MediaTek USB VCOM (Android) (COM26) on COM26
Device Path : usb\vid_0e8d&pid_200e&rev_0409&mi_01
Configuring Communication Channel...
Reading phone information...
CPU : MT6761
SW Ver. : MOLY.LR12A.R2.MP.V32.21.P133
HW Ver. : BBK_O1MP7_K61V1_64_BSP_HW
Starting Factory Reset...
Reset success
Operation finished
[UltimateMTK Ver. 2.4]

oppo a57 pettren and frp remove one done

oppo a5s cph1909 format done in meta mode one click

mi redmi 5a mi accuont remove done

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM29)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : C94306FF09FC94E60BC36DBEFB7F88648D7764E5313003FECA 69404ACB06A874
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8936_007]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo P1a42 [msm8916] [P1a42]
Software : P1a42_S288_160721_ROW, P1a42_S288_160721_ROW [Thu Jul 21 16:36:27 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-06-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.8