★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

oppo a5s Formate fs done

https//i.imgur.com/DpZnWJD.png[/img]']http://

Infinix x626 frp reset done

---

Brand : Infinix
Model : Hot S4 (X626B)
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Infinix
Manufacturer : INFINIX MOBILITY LIMITED
Model : Infinix X626
Prod. Name : H624
Device : Infinix-X626
Android Ver. : 9
Display ID : X626-H624JK-P-190320V199
Patch Level : 2019-02-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.2]

Y7 TRT-LX2 frp remove
Port : Not Applicable
Baud Rate : Not Applicable
Device : Huawei Y7 TRT-LX2
Operation : Remove FRP
Enabling ADB Mode... OK
Waiting for device... Found!
Model : TRT-LX2
Version : 7.0
Build : TRT-LX2-user 7.0 HUAWEITRT-LX2 C636B194 release-keys
Hardware : qcom
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:47
[Module Ver. 5.5]
Log Saved to Logs\200917_173546.log

Huawei Y6 Prime 2018 FRP Remove Done

Device : Huawei Y6 Prime 2018 (ATU-L42)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 3A001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D 15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_022]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown
Software : System 8.0.0.073(091Q), eng.jenkin.20200225.163112 [Tue Feb 25 16:31:12 CST 2020]
Android Ver. : 8.0.0
Patch Level : 2020-02-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 6.0

letv s2 frp done

---

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009900 [8976] 01000000
OPK_DATA : 2CAF747FFE06A407DFE3BCD6901A639592214E10F1E54309F6 30E6AD900723FD
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8976_004]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8976, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LeMobile [msm8952] [le_s2_ww]
Brand : Letv
Prod.Name : Le2_WW
Software : IIXOSOP5801910121S release-keys, 44 [Wed Oct 12 06:23:38 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.2

nokia 6.1 plus frp done

---

Device : Nokia TA-1083
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : 2F69871CD490AF7CD743D2D97DB3E11DD1B3B722B5F896699F 2916A09FA2DFF2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_023]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 64 GB
LU Count : 1 [0x0747C000]
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : 00WW_4_15G, 00WW_4_15G [Fri Jul 31 10:36:25 CST 2020]
Android Ver. : 10
Patch Level : 2020-08-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 6.2

mi y2 mi account done

---

Operation : Disable Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi S2 [ysl]
Brand : xiaomi
Prod.Name : ysl
Software : OPM1.171019.011, V10.3.1.0.OEFMIXM [Thu Apr 25 14:02:51 WIB 2019]
Android Ver. : 8.1.0
Patch Level : 2019-04-01
Reading Data...
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
QcFire Ver. 6.2

Redmi 5a frp removed by umt

---

Device : Xiaomi Mi 5a
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM42)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937] [riva]
Brand : Xiaomi
Prod.Name : riva
Software : CUSTOMER_VERSION_riva, V11.0.2.0.OCKMIXM [Tue Nov 5 23:20:03 WIB 2019]
Android Ver. : 8.1.0
Patch Level : 2019-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.2

Xiaomi Redmi 7A [pine] mi account done

---

Device : Xiaomi Redmi 7A
Operation : Disable Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_035]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 7A [pine]
Brand : Xiaomi
Prod.Name : pine
Software : ZQL1533-pine-build-20200509134127, V11.0.5.0.PCMINXM [Sat May 9 13:42:47 WIB 2020]
Android Ver. : 9
Patch Level : 2020-04-01
Reading Data...
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
QcFire Ver. 6.3

oppo a5s lock removed offline by umt

---

Operation : Factory Reset (New)
Checking for existing META ports...
Found MediaTek USB VCOM (Android) (COM9) on COM9
Device Path : usb\vid_0e8d&pid_200e&rev_0409&mi_01
Configuring Communication Channel...
Reading phone information...
CPU : MT6765
SW Ver. : MOLY.LR12A.R2.TC16.SP.V50.5.P96
HW Ver. : OPPO_O1MP6_K65V1_64_BSP_HW
Starting Factory Reset...
Reset success
Operation finished
[UltimateMTK Ver. 3.3]

xiaomi redmi note 9 pro india

---

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6250]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...Failed
Error Log : PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID 8+CjxkYXRhPgo8bG9nIHZhbHVlPSJFUlJPUjogU2lnbmF0dXJl IFZlcmlmaWNhdGlvbiBGYWlsZWQuIiAvPjwvZGF0YT48P3htbC B2ZXJzaW9uPSIxLjAiIGVuY29kaW5nPSJVVEYtOCIgPz4KPGRh dGE+CjxyZXNwb25zZSB2YWx1ZT0iTkFLIiByYXdtb2RlPSJmYW xzZSIgLz48L2RhdGE+
Reading Auth Blob...OK
Blob : NDE1MTQxNDE0MTRDNzM0MjQxNDE0MzM2NzM0QjUyNDY3MDYxNk Q2QjVBNzYzODZDNDk0NjZCNEU2NzczNjg1MTZFNUY0NDQ0NUY1 MU==
Requesting UMT Server for Auth Data...OK
Credits Left: 0
Authenticating...OK
Detecting Chip Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 16384, Sector Size: 4096
Writing [persist.img] -> [persist] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [recovery.img] -> [recoverybak] ...Done
Writing [vbmeta_system.img] -> [vbmeta_system] ...Done
Writing [vbmeta_system.img] -> [vbmeta_systembak] ...Done
Writing [metadata.img ] -> [metadata]...Done
Writing [ffu.img] -> [ffu] ...Done
Writing [super.img ] -> [super]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 6.3

Gionee f103 pro frp removed by umt mtk tool

---

Brand : Gionee
Model : F103 Pro
Operation : Reset FRP
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : GIONEE
Manufacturer : GIONEE
Model : F103 Pro
Prod. Name : F103_Pro
Device : GIONEE_GBL7360
Board : F103_Pro
Platform : mt6735
Android Ver. : 6.0
Display ID : amigo3.2.0
Patch Level : 2016-10-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.3]

FRP Moto E5 Play XT1920-18 **Without Losing Signal** Done with Ultimate FRP Tool

---

put the cell phone in Fastboot and connect it to the PC,
open Ultimate FRP Tool, select the XT1921 model and press Reset FRP
the equipment will restart several times and in each restart we wait for it to turn on completely and press OK
in one of the reboots it will ask us to give it ADB permissions on the phone,
in the last restart it will go directly to the desktop and without accounts, and with full signal



Log

Brand : Motorola
Model : XT1921
Operation : Reset FRP
Searching for Device in FastBoot Mode...OK
Reading Phone Information...OK
Model : XT1920-18
Boot Ver. : moto-msm8917-BE.C2
Baseband : M8917_34.42.05.98R PETTYL_LATAM_CUST
Software : Blur_Version.28.371.23.pettyl_amx.amx.en.US
IMEI : 355535*********
CPU : MSM8917
RAM : 1GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
EMMC : 16GB SAMSUNG FE62MB RV=08 PV=03 FV=0000000000000003
Setting Factory Mode...OK
Searching Network Interface...Found
Connecting to device...OK
Model : moto e5 play
Bootloader : 0xBEC2
Baseband : M8917_34.42.05.98R PETTYL_LATAM_CUST
Build : Blur_Version.28.371.23.pettyl_amx.amx.en.US
Android : 8.1.0
Searching Network Interface...Found
Connecting to device...OK
Model : moto e5 play
Bootloader : 0xBEC2
Baseband : M8917_34.42.05.98R PETTYL_LATAM_CUST
Build : Blur_Version.28.371.23.pettyl_amx.amx.en.US
Android : 8.1.0
Retetting FRP...OK
Searching for Device in FastBoot Mode...OK
Removing Factory Mode...OK
Operation Finished.
UltimateFRP Ver. 0.5b

SAMSUNG A025F FRP SUCCESSFULL BY UMT.[A02S]
Device : Samsung Galaxy A02s (SM-A025F)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : HS-USB Diagnostics 9008 (COM25)
Driver Info : Mobile, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 98431A976541787E851B78549BBDA354E64C343814B5A8618B B79571EF8267A5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_051]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : QP1A.190711.020.A025FXXU2AUC1, A025FXXU2AUC1 [Tue Mar 2 22:19:55 KST 2021]
Android Ver. : 10
Patch Level : 2021-02-01
Resetting FRP Lock......Done
Operation Finished.

Realme Narzo 10 user lock remove

---

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM23
Port Name: MediaTek USB Port (COM23)
Path: \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM23)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Platform : MT6768
Board : oppo6769
Platform : mt6768
Userdata is NOT ENCRYPTED
Resetting Locks (Oppo)...
- Success!
---IMPORTANT---
Start phone directly in Recovery to complete operation.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.3]

Vivo y11 user lock & frp reset done

---

Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : , eng.compil.20210517.184524 [Mon May 17 18:41:52 CST 2021]
Android Ver. : 11
Patch Level : 2021-05-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 7.0

oppo A83 user lock reset done

---

Operation : Oppo/Realme Factory Reset (Meta)
Checking for existing META ports...
No existing META port found.
Connect powered off phone...
Make sure to leave Buttons as soon as phone is detected.
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM44) on COM44
Device Path : \\?\usb#vid_22d9&pid_0006#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek PreLoader USB VCOM_V1632 (Android) (COM44) on COM44
Device Path : \\?\usb#vid_22d9&pid_0006#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Configuring Communication Channel...
Reading phone information...
CPU : MT6763
SW Ver. : MOLY.LR12A.R1.TC16.SP.V26.P58
HW Ver. : OPPO6763_C66_N1_HW
Brand: OPPO
Model: CPH1827
Name: OPPO A83(2018)
Platform: unknown
OEM Prod.: unknown
OEM Device: unknown
Build Date: Sat Sep 12 12:16:53 CST 2020
Display ID: CPH1827EX_11_A.35_200912
OTA Version: M6763E_11.A.35_0350_202009121041
Patch Level: 2019-10-05
Starting Safe Factory Reset...
Reset Success
Operation finished
If META method does not work, try Format FS in BROM mode.
[UltimateMTK Ver. 4.3]

nfinix Hot 8 FRP done

Brand : Infinix
Model : Hot 8 (X650C)
Operation : Reset FRP
Connection Mode : Preloader
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : Infinix
Manufacturer : INFINIX MOBILITY LIMITED
Model : Infinix X650C
Prod. Name : H626
Device : Infinix-X650C
Build Date : Thu Sep 17 16:24:00 CST 2020
Build Flavor : full_x650c_h626-user
Build Desc. : full_x650c_h626-user 9 PPR1.180610.011 40282 release-keys
Android Ver. : 9
Display ID : X650C-H626DEJ-P-200917V304
Patch Level : 2020-09-05
Platform : MT6765
Board : Infinix-X650C
Platform : mt6765
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.3]