★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

Nokia 2.2 TA-1188 Successful Flash

---

Operation : Flash Scatter
Using Preloader from Firmware
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM55)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&3b21e69d&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:False]
MEID : F2E64F17033C7E164975C854F43A3DEC
SoC ID[0] : 9D82835F351685B0CDE9283A7078EB98
SoC ID[1] : B136E494FC235EBBB1778826E8B988E5
Running Exploit...Done
Preloader : preloader_wasp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
DA : Nokia 2.2 DA_UMT.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 880103534C44333247410D514A627685 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000040000 [256.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : SLD32G
CID : 880103534C44333247410D514A627685
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x000000073A000000 [28.91 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Writing preloader [preloader_wasp.bin]...OK
Writing custom_a [custom.img]...OK
Writing elabel_a [elabel.img]...OK
Writing logo [logo.bin]...OK
Writing md1img_a [md1img.img]...OK
Writing spmfw_a [spmfw.img]...OK
Writing scp_a [scp.img]...OK
Writing sspm_a [sspm.img]...OK
Writing lk_a [lk.img]...OK
Writing boot_a [boot.img]...OK
Writing dtbo_a [dtbo.img]...OK
Writing tee_a [tee.img]...OK
Writing vendor_a [vendor.img]...OK
Writing system_a [system.img]...OK
Writing vbmeta_a [vbmeta.img]...OK
Writing custom_b [custom.img]...OK
Writing elabel_b [elabel.img]...OK
Writing md1img_b [md1img.img]...OK
Writing spmfw_b [spmfw.img]...OK
Writing scp_b [scp.img]...OK
Writing sspm_b [sspm.img]...OK
Writing lk_b [lk.img]...OK
Writing boot_b [boot.img]...OK
Writing dtbo_b [dtbo.img]...OK
Writing tee_b [tee.img]...OK
Writing vendor_b [vendor.img]...OK
Writing system_b [system.img]...OK
Writing vbmeta_b [vbmeta.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230114_173413.log

Vivo 1603 factory reset & frp done

---

Operation : Format FS 2 (Vivo)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM98)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1603 [msm8937] [PD1613F_EX]
Brand : vivo
Prod.Name : PD1613F_EX
Software : MMB29M release-keys, eng.compiler.20180314.095125 [Wed Mar 14 09:55:50 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-03-01
Preparing Data...Done
Formatting Userdata......Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.3.1

nfinix Note 8i FRP one Click

---

Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM54)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&3b21e69d&0&4
#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 91273F390B846342BE5FB9A7190AB47A
SoC ID[0] : E41FFBA38F2B9B3FA7D81BD19CE85B05
SoC ID[1] : 03392ABADAF8B213FC5DA375DB2975A9
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_x683_h694.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010033563643414202CE9ECCB0C735 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : 3V6CAB
CID : 15010033563643414202CE9ECCB0C735
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : INFINIX MOBILITY LIMITED
Ven. Model : Infinix X683
Platform : mt6768
Ven. Date : Tue Nov 17 14:48:11 CST 2020
Ver. Inc. : 201117V262
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230116_155319.log

oppo MTK FRP one Click

---

Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1633 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&3b21e69d&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : , []
Mode : BROM
Hw ID : MT6755 [0326] Helio P10/P15/P18
Details : 8A00,CB00,0001
Sec. Config : [SBA:True] [SLA:False] [DAA:False]
MEID : 0093013153D4DBC011AA2B6231DE12F0
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6750_15131.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : FULL-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...Failed/Unsupported
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : RX14MB
CID : 150100525831344D42073EEEDE429397
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : OPPO
Manuf. : OPPO
Model : OPPO F1s
Platform : mt6750
Device : F1S
And. Ver. : 5.1
Prod. Name : F1S
Build Dt. : Tue Dec 27 22:07:48 CST 2016
Display ID : F1S_11_A.16_161227
Ver. Inc. : 1482847378
Patch : 2016-09-05
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230119_142012.log

Model : Samsung
Operation : FRP Bypass [Enable ADB]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM8 : SAMSUNG Mobile USB Modem
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-M307F
IMEI: : 355696115990182
Software: : M307FXXU4CUJ1/M307FOLM4CUI3/M307FXXU4CUI1/M307FXXU4CUJ1
Product : XXV
Enabling ADB...OK
Searching for Device...Found
Brand : samsung
Model : SM-M307F
Product : m30s
Device : m30s
Andriod Ver. : 11
Patch Level : 2021-10-01
PDA : M307FXXU4CUJ1
Bootloader : M307FXXU4CUJ1
Build ID : RP1A.200720.012.M307FXXU4CUJ1
Build Date : Tue Oct 12 11:12:44 +07 2021
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
Elapsed Time 11.49
[UltimateSams v0.4]
Saved to Logs\230322_064758.log

Samsung A03s frp reset

---

Code:
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&66d5322&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8DD3CCB6E24986D80F1D3C27ABED2D7D
SoC ID[0] : 671EECDFCF4EF0A27E20AFF6DE64F33D
SoC ID[1] : F4CDD192D683942A56EF9DC6ADE3A9D6
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_hs03s.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100475836424142003B7A68267845 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GX6BAB
CID : 150100475836424142003B7A68267845
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Mon Nov 28 23:23:34 KST 2022
Display ID : TP1A.220624.014.A037FXXU2CVK7
Ver. Inc. : A037FXXU2CVK7
Locale : en-GB
Patch : 2022-11-01
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.3]
Log Saved : 20230322_100426.log

LENOVO TAB M10 TB-X606X FRP DONE MTK ONE CLICK !

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM16 [MediaTek USB Port (COM16)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&253aa30c&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 6AC8190E1A97D35F4DDCA2188499328F
Preparing device...
-- Success!
Preloader saved as : preloader_achilles6_row_data_230516_092918.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM16)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Mon Jun 13 16:21:35 CST 2022
Build Flavor : full_achilles6_row_data-user
Build Desc. : full_achilles6_row_data-user 10 QP1A.190711.020 TB-X606X_U release-keys
Android Ver. : 10
Display ID : TB-X606X_S300673_220613_BMP
Patch Level : 2022-05-05
Platform : MT6765
Board : achilles6_row_data
Platform : mt6765
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

samsung a750 frp king umt

Model : Samsung
Operation : FRP Bypass [2023 Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM27 : SAMSUNG Mobile USB Modem #4
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A750F
IMEI: : 353416108938540
Software: : A750FXXU5CVC1/A750FOJM5CVC1/A750FNXXU5CVC1/A750FXXU5CVC1
Product : PAK
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Enabling ADB (2023)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A750F
Product : a7y18lte
Device : a7y18lte
Andriod Ver. : 10
Patch Level : 2022-02-01
PDA : A750FXXU5CVC1
Bootloader : A750FXXU5CVC1
Build ID : QP1A.190711.020.A750FXXU5CVC1
Build Date : Fri Mar 4 20:21:57 KST 2022
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Elapsed Time 40:24
[UltimateSams v0.5]

Samsung A10 frp reset

---

Code:
Model : Samsung
Operation : FRP Bypass [2023 Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM183 : SAMSUNG Mobile USB Modem #121
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A105F
IMEI: : 356650108667777
Software: : A105FDDS6BUB1/A105FODM6BUB1/A105FDDS6BUB1/A105FDDS6BUB1
Product : INS
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Enabling ADB (2023)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A105F
Product : a10
Device : a10
Andriod Ver. : 10
Patch Level : 2021-02-01
PDA : A105FDDS6BUB1
Bootloader : A105FDDS6BUB1
Build ID : QP1A.190711.020.A105FDDS6BUB1
Build Date : Wed Feb 3 16:57:39 KST 2021
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < May 2023
Elapsed Time 06:49
[UltimateSams v0.5]
Saved to Logs\230807_180649.log

Infinix X669C frp done in single click via UMT MTK2

huawei pic-l19 frp

Brand : Huawei
Model : Enjoy 7 Plus TRT-AL00
Operation : Reset FRP
Enabling ADB Mode...OK
Waiting for device...Found!
Model : PIC-LX9
Version : 7.0
Build : PIC-LX9-user 7.0 HUAWEIPIC-LX9 C432B161 release-keys
Hardware : hi6250
Removing FRP Lock...Done
Operation Finished.
UltimateFRP Ver. 0.5.1

huawei y6p remove huawei id test point
rand/Model : *Auto* / *Auto Detect*
Operation : Reset Huawei ID
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM56)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&27c7ce02&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 61B554BA0D2EF908942FF84A1E4C49BE
SoC ID[0] : C5D9454C11E0CC78BA4C70E782AAFB57
SoC ID[1] : 481745D81DC9A7E84E68CE04011458BE
Running Exploit...
Installing LibUsb Filter Driver...OKDone
Downloading Preloader...OK
Saved as : preloader_k62v1_64_mex_a32.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68433861503E0100D029505743 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E0100D029505743
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Bootloader : LOCKED
Resetting Huawei ID...OK
Operation Finished.
[UltimateMTK2 v0.6r1]

Redmi note 5 pro Mi Account done

Operation : Reset Mi Account (New)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM15)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00C00 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_016]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : MSM8996, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5 [whyred]
Brand : xiaomi
Prod.Name : whyred
Software : PKQ1.180904.001, V11.0.5.0.PEIMIXM [Thu Sep 17 11:25:41 WIB 2020]
Android Ver. : 9
Patch Level : 2020-08-05
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 5223241539
Phone : +91978*****45
Display ID : 3A2KXUIWXLXY4
Writing Data...Done
Operation Finished.
QcFire Ver. 8.7

A035F FRP DONE ! SPD UNISOC !

Phone Storage: EMMC
SELECTED: SM-A035F
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Testpoint image link for this model is located in utils tab
Phone must be off with battery inside.
Connect Testpoint while inserting usb cable.
After booting, testpoint can be removed.
Detected: SPRD U2S Diag (COM9)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
Read partition info is supported by loader.
UID: 007418c008138784
***************
Manufacturer: samsung
Brand: samsung
Device: a03
Model: SM-A035F
Build ID: SP1A.210812.016
CPU arhitecture: arm64-v8a
Build product name: a03
Build description: a03nnxx-user 12 SP1A.210812.016 A035FXXU2BVI2 release-keys
Build Id: SP1A.210812.016
Android Release: 12
Android Version: SP1A.210812.016.A035FXXU2BVI2
Security patch: 2022-07-01
Bootloader can be unlocked: 1
CPU NAME: UMS9230
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\MOBITEL\Documents\spreadtrum_module\Saved _Logs\samsung_SP1A_210812_016_A035FXXU2BVI2_erase_ frp.txt
Total Time: 00:00:26
Done.

oppo a37 reset frp and patren

Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Brand : OPPO
Prod.Name : A37f
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.7

vivo y11 reset frp and patren

Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : , eng.compil.20220316.164614 [Wed Mar 16 16:43:37 CST 2022]
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 8.7

vivo y11 reset frp and patren

Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : , eng.compil.20220316.164614 [Wed Mar 16 16:43:37 CST 2022]
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 8.7

frp tecno spark 6 go (ke5k) done!

---

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM47)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9BFB23F20701D16371A87E4C7B3B7E8E
SoC ID[0] : A7D9754D3EF31675E57AA4EB84823E7F
SoC ID[1] : 1237D7521ADA6CAE19E7EAAEC10A09E4
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ke5k_h6122.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501004450364441420249A0CAF8A877 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DP6DAB
CID : 1501004450364441420249A0CAF8A877
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 10
Build Dt. : Thu Jun 16 20:01:51 CST 2022
Display ID : KE5k-H6122CD-Q-OP-220616V221
Ver. Inc. : CD-OP-220616V221
Locale : en-US
Patch : 2022-06-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20240911_182509.log

Infinix Hot 40 (X6836) Frp Done

---

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM22)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&55ce37d&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 1023DD98B285E5C819D5767EBFF3912A
SoC ID[0] : 40741D64B7F99E035D51812F8C0932E5
SoC ID[1] : 3CE4DE5F6C41B6A95A3366377EC4EFCA
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : A3A562
CID : D60103413341353632119BCF33D0AA77
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001CCF000000 [115.23 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20240912_175437.log