★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★ | NCK Forum

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Sticky: ★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

12-05-25 13:33 #421

Administrator

Realme c25s frp with umt dongal........

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM8)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 4992BE6C59A11032660979024A2D6AD8
SoC ID[0] : D38C9A60CDB780BE910E81A2A64645E3
SoC ID[1] : CF746D067CE09CF4F8D466CE6485FF30
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k69v1_64.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E47314A39533910131A7F0C5859 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G1J9S9
CID : 13014E47314A39533910131A7F0C5859
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : oplus
Prod. Model : ossi
And. Ver. : 12
Ven. Date : Wed Mar 29 11:21:48 CST 2023
Build ID : SP1A.210812.016
F. Print :
oplus/ossi/ossi:12/SP1A.210812.016/1680060108187:user
/release-keys
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240802_105521.log

12-05-25 13:33 #422

Administrator

nfinix smart 7 hd frp with umt dongal.........

Job: Remove FRP
SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM19)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 84C8907 [5e] 91B967
UID: TKUW49_18_18_7
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_40.txt
Total Time: 00:00:46
Done.

12-05-25 13:33 #423

Administrator

I tell vision 1 pro{L6502} FORMET WITH UMT DONGAL.......

Job: Safe Format Userdata
SELECTED: Vision 1 Pro(L6502)
ACTION: Wipe Userdata(misc)
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM19)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 9111E6 [5e] 110616
UID: TA7V02_4_12_22
FileSystem: EMMC
Read partition info is supported by loader.
Hardware: sp9832e_1h10_go
Build product name: L6502
Build description: L6502-user 10 QP1A.190711.020 5 release-keys
Product name: F3208
Transsion device name: itel Vision1Pro
Build Id: QP1A.190711.020
Android Release: 10
Android Version: L6502-F3208-10.0-IN-V59-20221025
Security patch: 2022-10-05
This phone have frp partition.
[misc]Formating userdata, wait...
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\sp9832e_1h10_go_L6502-F3208-10_0-IN-V59-20221025_format_userdata_misc.txt
Total Time: 00:00:36
Done.

12-05-25 13:34 #424

Administrator

Vivo y30 frp with umt dongal....

USING PL_EXLOIT [VIVO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : A022D746CA958FAC00C3EE196F51642A
SoC ID[0] : FD8CF5F487050C7C10F5AA8C862E58A7
SoC ID[1] : C7364D9F808AE3944C267AB7D6868A18
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : 598179CA98B78EE75DDE3E099847CA50
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G1J9S9
CID : 13014E47314A3953391008651E3C77EF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD1987F_EX
And. Ver. : 12
Prod. Ver. : PD1987F_EX_A_6.71.42
Hw. Ver. : PD1987F_EXMA
Build Dt. : Mon Oct 21 17:25:04 CST 2024
Display ID : SP1A.210812.003 release-keys
Ver. Inc. : compiler10211727
Locale : en-US
Patch : 2023-03-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.6]
Log Saved : 20241216_113425.log

12-05-25 13:34 #425

Administrator

Oppo a83 formet with umt dongal.....

Brand/Model : *Auto* / *Auto Detect*
Operation : META Reset (Oppo Reset (eMMC))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Connecting Device...OK
Waiting for Device [META]...OK
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Brand : OPPO
Model : CPH1729
Market Name : OPPO A83
Market Name : unknown
Manufac. : unknown
Build Date : Thu Feb 22 17:10:18 CST 2024
Ven. Date : unknown
Platform : unknown
OEM : unknown
OEM Device : unknown
Disp. ID : CPH1729EX_11_A.36_240222
Inc. Ver. : unknown
Patch Level : 2019-10-05
OTA Ver. : M6763D_11.A.36_0360_202402221537
Oppo Reset Settings (eMMC)...OK
Operation Finished.
[UltimateMTK2 v1.6]
Log Saved : 20241222_161406.log

12-05-25 13:34 #426

Administrator

Vivo y81i formet and frp with umt dongal....

USING PL_EXLOIT [VIVO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9C948FD134261EEEC1E948477889EED1
SoC ID[0] : 2A6DE82DFD2ABCE2C47F107175CEBA59
SoC ID[1] : 0A09932E5599395E692D8FBD0A078CBA
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : 30702400E69EBE08563B4BBF27E25BB3
Int. RAM : 0x000000000003A600 [233.50 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : HAG4a2
CID : 90014A484147346132A5C7F8BD39C523
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x00000003AB400000 [14.68 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1812
Device : PD1732CF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1732CF_EX_A_1.73.1
Prod. Name : PD1732CF_EX
Build Dt. : Mon Oct 21 15:02:57 CST 2024
Display ID : O11019 release-keys
Ver. Inc. : 1729494182
Locale : zh-CN
Patch : 2021-05-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.6]
Log Saved : 20241227_120034.log

12-05-25 13:34 #427

Administrator

Redmi 10c frp with umt dongle....

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 64 GB
LU Count : 6 [0x00D60800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Device : Xiaomi
Software : , V13.0.5.0.SGEINXM [Fri Jun 2 14:22:28 CST 2023]
Android Ver. : 12
Patch Level : 2023-05-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.3

12-05-25 13:34 #428

Administrator

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966 024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_021]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 8 GB
LU Count : 3 [0x00E90000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [63]
Reading Device Information...OK
Software : 00WW_4_11I, 00WW_4_11I [Tue Jul 20 11:41:11 CST 2021]
Android Ver. : 10
Patch Level : 2021-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.3
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done

12-05-25 13:35 #429

Administrator

Vivo y71{pd1724} pattern and frp with umt tool

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [54]
Reading Device Information...OK
Device : vivo vivo 1724 [msm8937_64]
Brand : vivo
Prod.Name : msm8937_64
Software : OPM1.171019.011 release-keys, eng.compil.20230201.110554 [Wed Feb 1 11:05:54 CST 2023]
Android Ver. : 8.1.0
Patch Level : 2021-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.3
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK

12-05-25 13:35 #430

Administrator

reset frp note 13 4g done
tp

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM78)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 256 GB
LU Count : 6 [0x03B11800] [0x00000800] [0x00000800] [0x00002000] [0x00080000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [102]
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.4

12-05-25 13:35 #431

Administrator

Redmi y1 lite pattern and frp unlock with umt....

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [48]
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937] [ugglite]
Brand : xiaomi
Prod.Name : ugglite
Software : N2G47H, V8.5.5.0.NDFMIED [Wed Sep 27 21:52:15 WIB 2017]
Android Ver. : 7.1.2
Patch Level : 2017-09-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.3

12-05-25 13:35 #432

Administrator

Redmi y1 lite flash with umt..........

Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [48]
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937] [ugglite]
Brand : xiaomi
Prod.Name : ugglite
Software : N2G47H, V11.0.3.0.NDFMIXM [Tue Oct 22 13:37:49 WIB 2019]
Android Ver. : 7.1.2
Patch Level : 2019-08-01
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system.img ] -> [system]...Done
Writing [cache.img ] -> [cache]...Done
Writing [persist.img ] -> [persist]...Done
Writing [config.bin] -> [config] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK [48]
Resetting FRP Lock......Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
QcFire Ver. 11.6

12-05-25 13:35 #433

Administrator

Vivo y93 pattern and frp with umt

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
Detecting Storage Type...OK
Hardware : 8937, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [59]
Reading Device Information...OK
Device : vivo vivo 1807 [msm8937_64]
Brand : vivo
Prod.Name : msm8937_64
Software : OPM1.171019.026 release-keys, eng.compil.20230314.165201 [Tue Mar 14 16:52:01 CST 2023]
Android Ver. : 8.1.0
Patch Level : 2021-07-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6

12-05-25 13:36 #434

Administrator

Samsung a22 pattern and frpwith umt.....

Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM9 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A226B
IMEI: : 358136643740020
Software: : A226BXXS4AVD5/A226BODM4AVB1/A226BXXS4AVD5/A226BXXS4AVD5
Product : INS
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM11 : SAMSUNG Mobile USB Modem #6
Reading Data from Phone...Done
Chipset : MT6833 [HiSpeed]
Closing Session...Done
Port: : COM11 : SAMSUNG Mobile USB Modem #6
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 01:01
[UltimateSams v0.7]
Saved to Logs\250228_164147.log

12-05-25 13:36 #435

Administrator

Lyf jio f320 flasing with umt.........

Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00003901
OPK_DATA : 56B08AAC774E1EE144C7FA3FF863A8E9D329B4B1195C927948 C844ECB3219673
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_061]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8909, EMMC, 4 GB
LU Count : 3 [0x00748000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [36]
Reading Device Information...OK
Device : BlueBank F320B [msm8909] [F320B]
Brand : LYF
Prod.Name : F320B
Software : LYF-F320B-002-02-37-130921, LYF-F320B-002-02-37-130921 [Mon Sep 13 14:16:19 CST 2021]
Android Ver. : 6.0.1
Patch Level : 2020-11-01
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK [36]
Resetting FRP Lock......Done
Resetting device...done
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
QcFire Ver. 11.6
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done

12-05-25 13:36 #436

Administrator

One plus nord frp with umt.......

Device : OnePlus Nord
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1E01100 [SM7250] 41515100
OPK_DATA : B55B7FF3F00B51F821204C6FE5E8BAC69682E8E3A5583E0413 536462BAA5E941
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7250]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM7250, EMMC, 1 TB
LU Count : 3 [0x22382D47] [0x22382D47] [0x22382D47]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [0]
Resetting FRP Lock...Done
Using Patch Method...OK
Operation Finished.
QcFire Ver. 11.6

12-05-25 13:36 #437

Administrator

Realme c1 pattern and frp with umt......

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 7E535102966019C51AC80885C6494FE80C3E91F62E6F5FD40D FCF3AE3990B0BC
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_074]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [64]
Reading Device Information...OK
Device : OPPO
Android Ver. : 9
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done

12-05-25 13:37 #438

Administrator

ivo Y81 (1803) PATTERN AND FRP WITH UMT.....

USING PL_EXLOIT [VIVO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 7634055F5C67EBF2A1F0804F6B81D4EF
SoC ID[0] : B8344D34DF68329A5710D3F0C9A80E2C
SoC ID[1] : A8B35285B6984E631DE661F3E49EBC40
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : B1A10F34012458626EC17446AFA29C41
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E0344D0A9615563
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1808
Device : PD1732F_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1732F_EX_A_2.71.3
Prod. Name : PD1732F_EX
Build Dt. : Mon Oct 21 16:05:27 CST 2024
Display ID : O11019 release-keys
Ver. Inc. : 1729497930
Locale : en-US
Patch : 2021-05-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20250309_180326.log

12-05-25 13:37 #439

Administrator

Oppo A7 unlock

Code:
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 74CBAEF3BA268ADE2E3358EFC3D2CA99C340596C0C7F14E283D91F76E0EA3DFE
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_073]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [63]
Reading Device Information...OK
Device : OPPO
Android Ver. : 8.1.0
Patch Level : 2021-03-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 10.8

12-05-25 13:37 #440

Administrator

Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM102 : SAMSUNG Mobile USB Modem #56
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A045M
IMEI: : 358XXXXXXXXXXXX
Software: : A045MUBS1AVJ1/A045MOWO1AVJ1/A045MUBS1AVJ1/A045MUBS1AVJ1
Product : BVO
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM22 : SAMSUNG Mobile USB Modem #2
Reading Data from Phone...Done
Chipset : MTK6765 [HiSpeed]
Closing Session...Done
Port: : COM22 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 01:04
[UltimateSams v0.7]
Saved to Logs\241010_151740.log

Currently Active Users Viewing This Thread: 2

0 members and 2 guests

No members right now.

Join NCK Forum — it's free

✔ Ask questions and get answers from experienced technicians
✔ Download files and attachments
✔ Follow official NCK, UMT and Avengers updates
✔ Mark solutions and earn reputation

839 members · 0 solved problems · 6 posts this week

Similar Threads

Thread	Thread Starter	Forum	Replies	Last Post
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	2	28-08-25 12:07
[06/10/2026] Ultimate Multi Tool Unisoc Module v2.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	0	06-10-26 10:09
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	NCK & UMT Team News Updates	0	25-08-25 13:07
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Online Tool	7	14-09-26 14:27
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Box / Dongle Premium v2	0	12-05-25 19:22

Bookmarks

Facebook X / Twitter Telegram WhatsApp

« Previous Thread | Next Thread »