★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★ | NCK Forum

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Please log in to view member profiles.

Sticky: ★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

12-05-25 18:48 #461

Administrator

techno spark 30c

Brand/Model : *Auto* / *Auto Detect*
Operation : META Functions (Enable ADB (Infinix))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM32)
Connecting Device...OK
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM36)
Brand : TECNO
Model : TECNO KL8h
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Fri Sep 20 21:54:34 CST 2024
Ven. Date : Fri Sep 20 21:36:12 CST 2024
Platform : MT6835
OEM : unknown
OEM Device : unknown
Disp. ID : KL8h-H353VX-U-IN-240920V398
Inc. Ver. : 240920V378
Patch Level : 2024-09-05
OTA Ver. : unknown
BRAND : TECNO
MODEL : TECNO KL8h
BUILD : KL8h-H353VX-U-IN-240920V398
BUILD DATE : Fri Sep 20 21:54:34 CST 2024
Enabling ADB...Done
Operation Finished.

Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Reset FRP (ADB)
Searching for Device..Found
Brand : TECNO
Model : TECNO KL8h
Android Ver. : 14
Build : KL8h-H353VX-U-IN-240920V398
Build Date : Fri Sep 20 21:54:34 CST 2024
Patch Level : 2024-09-05
Bootloader : unknown
Resetting FRP Lock...Done
Operation Finished.

12-05-25 18:49 #462

Administrator

Device : Xiaomi Mi A2
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21 F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
WARNING! High Speed Driver is not installed.
Hardware : MSM8996, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00002000]
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK [69]
Reading Device Information...OK
Software : QKQ1.190910.002 V11.0.28.0.QDIMIXM, V11.0.28.0.QDIMIXM [Fri Jul 2 09:41:53 WIB 2021]
Android Ver. : 10
Patch Level : 2021-07-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.7

Report Post

12-05-25 18:49 #463

Administrator

nokia 5.3 ta-1234 frp done

Device : Nokia 5.3 (TA-1234)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00000000
OPK_DATA : C0543DB485580D98D768C12906526F0A6E785019591A402429 A7406CFF83AAA8
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [79]
Reading Device Information...OK
Device : HMD Global Nokia 5.3 [CAP_sprout]
Brand : Nokia
Prod.Name : CaptainAmerica_00WW
Software : 00WW_3_490_SP03, 00WW_3_490_SP03 [Fri Jun 9 13:59:21 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.7

12-05-25 18:49 #464

Administrator

OnePlus Nord CE 2 5G (IV2201) NEW SECURITY FRP

Code:

USING PL_EXLOIT [OPPO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON] 
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM38)
Device Path : \\?\usb#vid_22d9&pid_0006#5&729f7fe&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900/1080
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 904A13AF22DBC99B0DC69B4BFC826D89
SoC ID[0] : 48606FDD90E7DE0AB04A63D0AA708C6E
SoC ID[1] : 3FCF5A80E2B0128B4F3810E8F33F9947
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : D7196902B9ABD37F3BE36A0D0DC841DE
RID : D7196902B9ABD37F3BE36A0D0DC841DE
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V9001JM-B81
CID : CE014B4D3856393030314A4D2D423831
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.0.1]
Log Saved : 20250406_201804.log

12-05-25 18:49 #465

Administrator

REDMI NOTE 13 FRP DONE;
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.4.1
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01D46800] [0x00000800] [0x00000800] [0x00002000] [0x00080000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [102]
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:49 #466

Administrator

Device : Xiaomi Redmi 9T
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221205011709, V13.0.2.0.SJQMIXM [Mon Dec 5 01:23:38 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:49 #467

Administrator

Device : Xiaomi Redmi S2
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [57]
Reading Device Information...OK
Device : Xiaomi Redmi S2 [ysl]
Brand : xiaomi
Prod.Name : ysl
Software : PKQ1.181203.001, V12.0.2.0.PEFMIXM [Thu Sep 24 20:47:30 WIB 2020]
Android Ver. : 9
Patch Level : 2020-09-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6173010182
Phone : +59175****53
Display ID : 44EW-FPCJ-QP24-UWE
Writing Data...Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:50 #468

Administrator

Brand/Model : Motorola / G22 (XT2231)
Operation : Reset FRP
BOOT CFG : [EXPLOIT:OFF]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM26)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&13de0221&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 016F8F1EFE22193778D76337C96178C0
SoC ID[0] : BF795D4E51C570CFE97651D3DC8FA98E
SoC ID[1] : DBCAD0254065BA6C344E8241F07D2071
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : 160F2E9030B8A56766EBE84257EDBC21
RID : 160F2E9030B8A56766EBE84257EDBC21
Int. RAM : 0x000000000003A000 [232,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DAB
CID : 15010044563644414202F8A8FE2F49D5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : motorola
Manuf. : motorola
Model : moto g22
Device : hawaiip
And. Ver. : 12
Prod. Name : hawaiip_g
Build Dt. : Sat Mar 1 11:00:40 CST 2025
Display ID : STAS32.79-77-28-63-9
Ver. Inc. : 77-28-63-9
Locale : en-US
Patch : 2025-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.1]
Log Saved : 20250422_171523.log

12-05-25 18:50 #469

Administrator

Device : Xiaomi Poco X3 NFC (surya)
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM7150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6513316490
Phone : +59177****55
Display ID : 4RQU-WNCO-3W5B-MOW
Writing Data...Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:50 #470

Administrator

Device : Xiaomi Poco X3 NFC (surya)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...DoneOKDone
Sending Loader [SM7150]...
Executing Loader...
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...
Detecting Storage Type...OK
Hardware : SM7150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:50 #471

Administrator

Oppo a57 format and frp reset done

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...
Protocol Ver. : 2OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27 277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [56]
Reading Device Information...OK
Device : OPPO OPPO A57 [msm8937] [CPH1701]
Brand : OPPO
Prod.Name : CPH1701
Software : CPH1701EX_11_A.31_171214, eng.root.20171214.113651 [Thu Dec 14 11:39:35 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-12-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:50 #472

Administrator

Samsung Galaxy Tab A9+ 5G (SM-X218U) FRP Remove Done

Code:

Device    : Samsung Galaxy Tab A9+ 5G (SM-X218U) BIT-6
Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...
Protocol Ver.    : 2OK
Hardware ID    : E1901A00 [SM6375] 00002000
OPK_DATA    : AADE3DB87CCB3F7EFB0D28CEED23F0E3B37CC33B6D93AFE23C28E2B62A16D7D0
Initializing Protocol...OK
Using Pre-Defined Loader [SM-X218U BIT-6.ufl]
Preparing Loader...Done
Sending Loader [SM-X218U BIT-6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : SM6375, UFS, 64 GB
LU Count    : 6 [0x00EC1C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...OK [Sign]
Build    : X218USQS3CXH3
Int. Build    : SM-X218U_NA_VZW_QKEY1
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:50 #473

Administrator

Code:

Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver.    : 2OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : 8937, EMMC, 16 GB
LU Count    : 3 [0x01D5A000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [51]
Reading Device Information...OK
Device    : vivo vivo [msm8937] [PD1613]
Brand    : vivo
Prod.Name    : PD1613
Software    : MMB29M release-keys, eng.compiler.20180823.181455 [2018å¹´ 08æœˆ 23æ—¥ æ˜ŸæœŸå›› 18:20:14 CST]
Android Ver.    : 6.0.1
Patch Level    : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...
Protocol Ver.    : 2OK
Hardware ID    : E1F00400 [8937] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware    : 8937, EMMC, 16 GB
LU Count    : 3 [0x01D5A000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [51]
Reading Device Information...OK
Device    : vivo vivo [msm8937] [PD1613]
Brand    : vivo
Prod.Name    : PD1613
Software    : MMB29M release-keys, eng.compiler.20180823.181455 [2018å¹´ 08æœˆ 23æ—¥ æ˜ŸæœŸå›› 18:20:14 CST]
Android Ver.    : 6.0.1
Patch Level    : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.8

12-05-25 18:51 #474

Administrator

vivo Y55s{PD1613BF} PATTERN AND FRP WITH UMT.....

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [51]
Reading Device Information...OK
Device : vivo vivo 1610 [msm8937] [PD1613BF_EX]
Brand : vivo
Prod.Name : PD1613BF_EX
Software : MMB29M release-keys, eng.compiler.20201031.222219 [Sat Oct 31 22:26:50 CST 2020]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM11)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Rebooting Device...Done

12-05-25 18:52 #475

Administrator

Vivo y17 pattern unlock with umt...

USING PL_EXLOIT [VIVO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 390E1AFF48D4740C38063046F3C71A17
SoC ID[0] : E7BF5953FAE1093A3A70FEF142EC867D
SoC ID[1] : 9ACC11DD41F1D2AFDB38B3168DA5C2D4
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
HRID : A4663482B1082E30BF58B08CD390811F
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DV6DMB
CID : 150100445636444D420273859017C5C7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1902
Device : PD1901F_EX
And. Ver. : 9
Prod. Name : PD1901F_EX
Build Dt. : Mon Oct 21 16:45:45 CST 2024
Display ID : PPR1.180610.011 release-keys
Ver. Inc. : compiler10211646
Locale : en-US
Patch : 2021-05-01
Bootloader : LOCKED
Erasing Userdata...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20250313_150501.log

12-05-25 18:52 #476

Administrator

Redmi note 8 frp with umt......

Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Detecting Chip Type...OK
Hardware : SDM665, EMMC, 2 GB
LU Count : 3 [0x00000000] [0x00000000] [0x00000000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK [87]
Reading Device Information...OK
Device : Xiaomi
Software : , V12.5.2.0.RCOINXM [Fri Jun 17 19:36:12 WIB 2022]
Android Ver. : 11
Patch Level : 2022-05-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.6

12-05-25 18:52 #477

Administrator

vivo 1807 FORMET AND FRP WITH UMT......

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
Detecting Storage Type...OK
Hardware : 8937, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [59]
Reading Device Information...OK
Device : vivo vivo 1807 [msm8937_64]
Brand : vivo
Prod.Name : msm8937_64
Software : OPM1.171019.026 release-keys, eng.compil.20241010.115310 [Thu Oct 10 11:53:10 CST 2024]
Android Ver. : 8.1.0
Patch Level : 2021-07-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.6

12-05-25 18:52 #478

Administrator

Itell a60 frp with umt.....

Job: Remove FRP
SELECTED: A60s(A662LM)
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM22)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] C0CA0 [5e] 91D568
UID: 30bP0B_7_42_104
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_5.txt
Total Time: 00:00:39
Done.

12-05-25 18:53 #479

Administrator

Redmi 9a reset frp with umt.....

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
DL AGENT : DA_Redmi_9A.bin
PL : C:\Users\TONY MOBILE SOFTWARE\Downloads\Compressed
\Xiaomi Redmi 9a Preloader File (Brom Bypass)\Xiaomi
Redmi 9a Preloader File (Brom Bypass)\preloader_k62v1
_64_bsp--V12.0.2.0.QCDIDXM_id.bin
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM7)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 7F7D412083DB48429C579047C80462B3
SoC ID[0] : 3D3EE5420EC4264323AABFC96A7E6CE5
SoC ID[1] : 2A4BD0A4457A9B2F8DAA87A7DAA88AA2
Running Exploit...Done
Preloader : preloader_k62v1_64_bsp--V12.0.2.0.QCDIDXM_id.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
DA : DA_Redmi_9A.bin
DA_INFO : MTK_AllInOne_DA_v3.3001.2020/07/07.10:10_513994
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100424A5444345209C37C8E2EA7B9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : B543B075EAF10BDD1BE2FB979CA91207
RID : B543B075EAF10BDD1BE2FB979CA91207
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : BJTD4R
CID : 150100424A5444345209C37C8E2EA7B9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 10
Build Dt. : Thu Feb 9 12:08:14 CST 2023
Display ID : QP1A.190711.020
Ver. Inc. : V12.0.26.0.QCDINXM
Locale : en-GB
Mod. Dev. : dandelion_in_global
Patch : 2023-02-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v2.0]
Log Saved : 20250325_122132.log

12-05-25 18:53 #480

Administrator

Tecno spark 20 pro 5g reset frp with umt...by adb

Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Reset FRP (ADB)
Searching for Device..Found
Brand : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
TECNO
Model : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
TECNO KJ8
Android Ver. : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
14
Build : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
KJ8-H338KL-U-IN-250219V1215
Build Date : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
Wed Feb 19 22:41:18 CST 2025
Patch Level : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
2025-02-05
Bootloader : The directory name is invalid.
Could Not Find C:\UMTool\UltimateMTK2\AdbWinApi.dll.dat
unknown
Resetting FRP Lock...Done
Operation Finished.
[UltimateMTK2 v2.2]
Log Saved : 20250506_124140.log

Currently Active Users Viewing This Thread: 107

0 members and 107 guests

No members right now.

Join NCK Forum — it's free

✔ Ask questions and get answers from experienced technicians
✔ Download files and attachments
✔ Follow official NCK, UMT and Avengers updates
✔ Mark solutions and earn reputation

842 members · 0 solved problems · 6 posts this week

Similar Threads

Thread	Thread Starter	Forum	Replies	Last Post
[06/10/2026] Ultimate Multi Tool Unisoc Module v2.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	0	06-10-26 10:09
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	UMTv2 - Ultimate Multi Tool Box	2	28-08-25 12:07
[25/08/2025] Ultimate Multi Tool Unisoc Module v1.2 Released	Fast Unlocking	NCK & UMT Team News Updates	0	25-08-25 13:07
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Online Tool	7	14-09-26 14:27
NCK Online Tool Generic MTK v0.1 (Feature Phones) Update Released - [12/02/2025]	Fast Unlocking	NCK Box / Dongle Premium v2	0	12-05-25 19:22

Bookmarks

Facebook X / Twitter Telegram WhatsApp

« Previous Thread | Next Thread »