★★★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★★★

Turkcell T60 Read Pattern Done By U.M.T

---

Operation : Read Pattern Lock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000400
OPK_DATA : C7EF5E9C6DE5335E2E3B54BF2C47DFF605D327262E03B79E51 5436BF642B09F4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8936_037.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : TURKCELL TURKCELL T60 [msm8916]
Software : TURKCELL T60_V1.0.0B16, 20150828.021007 [Fri Aug 28 02:11:18 CST 2015]
Android Ver. : 5.0.2
USERDATA : Normal
Reading Pattern Data...Done
Pattern : 12369
Operation Finished.
Module Ver. 2.4

Xiaomi_Redmi 5 read flash in umt

---

Operation : Read Firmware
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_009.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
USERDATA : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953]
Software : N2G47H, V9.5.14.0.NDAMIFD [Wed May 30 22:50:10 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
Reading [modem]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [devcfg]...Done
Reading [devcfgbak]...Done
Reading [dsp]...Done
Reading [sec]...Done
Reading [splash]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [boot]...Done
Reading [recovery]...Done
Reading [system]...Done
Reading [cache]...Done
Reading [persist]...Done
Reading [misc]...Done
Reading [mdtp]...Done
Reading [lksecapp]...Done
Reading [lksecappbak]...Done
Reading [cmnlib]...Done
Reading [cmnlibbak]...Done
Reading [cmnlib64]...Done
Reading [cmnlib64bak]...Done
Reading [keymaster]...Done
Reading [keymasterbak]...Done
Reading [cust]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\Xiaomi_Redmi 5_N2G47H_2018-05-01\
Operation Finished.

redmi5 mi account disable

---

Operation : Disable Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953_009.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953]
Software : N2G47H, V9.5.14.0.NDAMIFD [Wed May 30 22:50:10 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
Reading Data...
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.

Samsung N950F 7.1.1 ADB FRP Reset Done!

Device: SM-G610F
Operation: Reset FRP
Searching for Device... Found
Model: SM-N950F
Baseband: N950FXXU3BRA2
Bootloader: N950FXXU3BRA8
PDA: N950FXXU3BRA8
Android Version: 7.1.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:09
[Ultimate Samsung Flasher v1.3

Motorola XT1650-02 Android 8.0 Security patch may 2018 frp done.

---

Port : Fastboot Inteface
Baud Rate : Not Applicable
Device : Motorola
Operation : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1650-02
Boot Ver. : moto-msm8996-92.03
Baseband : M8996_1239.53.01.126.29.01R GVS
Software : Blur_Version.27.201.5.griffin_verizon.verizon.en.U S
IMEI : 351854081994738
CPU : MSM8996
RAM : 4GB SAMSUNG LP4 DIE=8Gb M5=01 M6=05 M7=00 M8=08
EMMC : not found

Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model : XT1650
Bootloader : 0x9203
Baseband : M8996_1239.53.01.126.29.01R GVS
Build : Blur_Version.27.201.5.griffin_verizon.verizon.en.U S
Android : 8.0.0
Searching Network Interface... Found
Connecting to device... OK
Model : XT1650
Bootloader : 0x9203
Baseband : M8996_1239.53.01.126.29.01R GVS
Build : Blur_Version.27.201.5.griffin_verizon.verizon.en.U S
Android : 8.0.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 05:51
[Module Ver. 5.0]

SAMSUNG SM-T285 FRP LOCK RESET DONE
Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM35 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-T285
IMEI: 355755089764856
Software: T285XXU0ARB1/T285OJV0ARB1/T285XXU0AQD1/T285XXU0ARB1
Init Download Mode... OK
Port: COM32 : SAMSUNG Mobile USB Modem #3
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:56
[Ultimate Samsung Flasher v1.3]

Operation : Reset FRP
CPU : MT6737M
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.00.00]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : PreLoader USB VCOM Port (COM85)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usbser.sys, 2.0.0.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : INTEX
Manufacturer : INTEX
Model : INTEX AQUA LIONS X1
Prod. Name : AQUA_LIONS_X1
Device : AQUA_LIONS_X1
Board : INTEX
Platform : mt6737m
Android Ver. : 7.0
Display ID : INTEX_AQUA_LIONS_X1_V03_Indian
Patch Level : 2017-09-05
Userdata is NOT ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.5]

Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Firehose Loader...Done
Sending Loader [8936_036.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : bq Aquaris M5 [msm8916]
Software : 5.2.0_20180228-1304, 5.2.0_20180228-1304 [Wed Feb 28 14:06:07 CET 2018]
Android Ver. : 7.1.2
Patch Level : 2018-01-05
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.3

moto 1750 frp unlock
Waiting for Phone in BROM Mode...
Connect Power Off phone now...
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Start FRP Reset Task...
Hardware : MT6580_S00
Resetting FRP...
FRP Reset Done.
Disconnect cable and Power ON phone.

MOTO NEXUS 6 FRP DONE

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Motorola Nexus6
Operation : FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : Not Found
Boot Ver. : moto-apq8084-72.04
Baseband : D4.01-9625-05.45+FSG-9625-02.117
Software : none
IMEI : Not Found
CPU : APQ8084 ES1.1
RAM : 3072MB Hynix S8 SDRAM DIE=6Gb
EMMC : 32GB Samsung REV=07 PRV=0B TYPE=57
Preparing Device... Done
Connecting to device on COM787... OK
Initializing Device... OK
MSM HwID : E110900000002802
Sending Data... Done
Writing Data... Done
Searching for Device in FastBoot Mode... OK
Restoring Data... Done
If phone stuck on logo for long time, then wipe userdata/cache from Recovery.
Operation Finished.
Elapsed Time: 01:09
[Module Ver. 5.0]
Log Saved to Logs\180717_163151.log

moto-E2 (4g-lte) FRP RESET DONE
https://i.imgur.com/bkZtJPs.png[/img]"]

J320H Reset FRP !

---

Brand : Samsung
Model : J320H
Operation : Reset FRP
Searching for Phone...Found
Port: : COM43 : SAMSUNG Mobile USB Modem #7
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : SPRD8735 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.4

WORLD FIRST X608/X573 INFINIX IMEI REPAIR BY UMT PRO
Searching for Device in FTM Mode...Not Found
Port : COM208 : Qualcomm HS-USB Android DIAG 9020 (COM208)
Compile : May 9 2018 21:39:00
Release : Apr 09 2018 01:00:00
Hw. Ver. : 8937.gen
Software : ----
IMEI : 35475309XXXXXX / 35475309XXXXXX
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\8937.gen_----_35475XXXXXX_181208_220252.qcn
Switching to EDL Mode...Done
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM268)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : INFINIX MOBILITY LIMITED Infinix X608
Software : X608-QL1661ABCDEF-O-180509V12, ABCDEF-180509V12 [Wed May 9 21:18:51 CST 2018]
Android Ver. : 8.0.0
Patch Level : 2018-05-05
Saving EFS Backup.......OK
EFS Backup : EFS_INFINIX MOBILITY LIMITED_Infinix X608_X608-QL1661ABCDEF-O-180509V12_2018-05-05_181208_220447.ueb
Reset EFS (Full)......Done
Port : COM208 : Qualcomm HS-USB Android DIAG 9020 (COM208)
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.

oppo a71 pin lock removed by umt

---

Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM31)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47 647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 3.4

Genreal Mobile 4G Root Android 6.0.1 Done By QcFire

---

Operation : Root Device
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : [msm8916]
Software : MOB30Z, 3084227 [Thu Jul 21 22:02:08 UTC 2016]
Android Ver. : 6.0.1
Patch Level : 2016-08-05
Reading Data from Device...Done
Saving Backup...Done
Backup : C:\UMTool\QcFire\Read\_MOB30Z_2016-08-05\boot_org.qri
Preparing Data...Done
Injecting Root Script...Done
Patching Kernel...Done
Repacking Image...Done
Saving Root Image...Done
Root Image : C:\UMTool\QcFire\Read\_MOB30Z_2016-08-05\boot.qri
Writing Root Image...Done
If phone hang on logo, or boot loop, just write boot_org.qri using [Flash QRI]
Operation Finished.
QcFire Ver. 3.5

Redmi Note 5 Phone Lock | Frp Lock Removed by UMT Dongle

Thanks To UMT Team

reeder M8 mt8163 FRP Reset Done.

---

Operation : Reset FRP
CPU : MT8163
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.2017-12-29.16:29]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM35)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Driver: MediaTek Inc., usb2ser.sys, 3.0.1504.0
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : reeder
Manufacturer : reeder
Model : reeder M8
Prod. Name : full_hiteq8163_ce
Device : hiteq8163_ce
Platform : mt8163
Android Ver. : 6.0
Display ID : MRA58K dev-keys
Patch Level : 2016-05-01
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[Ver. 1.6]

vivo y 71 formate data reset

---

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM58)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1724
Software : OPM1.171019.011 release-keys, eng.compil.20180426.003951 [Thu Apr 26 00:39:51 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-03-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.4

Samsung T285 FRP done

---

Code:
Brand : Samsung
Model : N920C
Operation : Reset FRP
Searching for Phone...Found
Port: : COM1148 : SAMSUNG Mobile USB Modem #717
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-T285
IMEI: : xx
Software: : T285XXU0ARB1/T285OJV0ARB1/T285XXU0AQD1/T285XXU0ARB1
Product : SM-T285NZKAXSG
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM164 : SAMSUNG Mobile USB Modem #64
Reading Data from Phone...Done
Chipset : SPRD8735 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5

umt qcfire v3.6 remove mi acount xiaomi S2 done

Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi S2
Software : OPM1.171019.011, V10.0.8.0.OEFMIFH [Tue Dec 4 18:19:28 WIB 2018]
Android Ver. : 8.1.0
Patch Level : 2018-11-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.