★★★ Post Here successful jobs using UMT - Ulitmate SPRD Unisoc Module ★★★

Code: 
Flash Firmware PMT4638_3G

EXE: Ultimate Unisoc Module v0.2
ACTION: Flash Firmware.
Selected firmware: PMT4638_3G_RU.20190916.1.0.05.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM56)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:04] Loader ok
[00:00:04] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:04] [1]First boot done.
[00:00:04] Sending second loader.
[00:00:08] Second loader sent ok.
New flash protocol detected.
[00:00:08] Reading: system
System name: system
Phone and firmware have same android
[00:00:08] Reading: miscdata
[00:00:08] Reading: w_fixnv1
NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_867400********\_86740**********_nv ram_backup_1.tar
[00:00:18] Making flash ic repartition.
[00:00:18] Start write: w_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:21] Start write: prodnv
[00:00:23] Format: uboot
[00:00:23] [uboot]Format OK.
[00:00:23] Format: uboot_log
[00:00:23] [uboot_log]Format OK.
[00:00:23] Start write: splloader
[00:00:23] Start write: vbmeta
[00:00:23] Start write: w_modem
[00:00:27] Start write: w_deltanv
[00:00:27] Start write: w_gdsp
[00:00:29] Start write: pm_sys
[00:00:30] Start write: gpsgl
[00:00:30] Start write: gpsbd
[00:00:30] Start write: wcnmodem
[00:00:30] Start write: boot
[00:00:37] Start write: recovery
[00:00:44] Start write: system
[00:05:09] Start write: userdata
[00:05:39] Start write: logo
[00:05:40] Start write: fbootlogo
[00:05:40] Start write: cache
[00:05:43] Start write: vendor
[00:06:17] Format: w_runtimenv1
[00:06:17] [w_runtimenv1]Format OK.
[00:06:17] Format: misc
[00:06:17] [misc]Format OK.
[00:06:17] Start write: trustos
[00:06:18] Start write: sml
[00:06:18] Start write: uboot
[00:06:18] Start write: persist
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__1.txt
Total Time: 00:06:33
Done.
 
Code: 
Flash Firmware BQ-7083

EXE: Ultimate Unisoc Module v0.2
ACTION: Flash Firmware.
Selected firmware: S706_7731C_7.0_B18_BQru-7083_OTA_NV0602_20171116_V9.0.pac
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM56)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:02] [1]First boot done.
[00:00:02] Sending second loader.
[00:00:06] Second loader sent ok.
[00:00:06] Reading: system
System name: system
Phone and firmware have same android
[00:00:06] Reading: miscdata
[00:00:06] Reading: wfixnv1
NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_86740*******\_86740*********_nvram _backup_2.tar
[00:00:16] Making flash ic repartition.
[00:00:16] Start write: prodnv
[00:00:17] Format: uboot
[00:00:18] [uboot]Format OK.
[00:00:18] Start write: splloader
[00:00:18] Start write: wmodem
[00:00:20] Start write: wdsp
[00:00:20] Start write: wcnmodem
[00:00:20] Start write: boot
[00:00:23] Start write: trustos
[00:00:23] Start write: vmm
[00:00:23] Start write: recovery
[00:00:26] Start write: system
[00:05:41] Start write: persist
[00:05:42] Start write: userdata
[00:05:47] Start write: logo
[00:05:47] Start write: fbootlogo
[00:05:47] Format: wruntimenv1
[00:05:47] [wruntimenv1]Format OK.
[00:05:47] Format: wcnruntimenv1
[00:05:47] [wcnruntimenv1]Format OK.
[00:05:47] Start write: cache
[00:05:49] Format: misc
[00:05:49] [misc]Format OK.
[00:05:49] Start write: sysinfo
[00:05:50] Start write: uboot
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__2.txt
Total Time: 00:05:56
Done.
 
Code: 
iTEL L5503 factory tool give error nv_crased but umt flash sucessfully


EXE: Ultimate Unisoc Module v0.2
ACTION: Flash Firmware.
Selected firmware: L5503-F6301-9.0-OP-V074-20200610_1027_user.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM15)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:03] Loader ok
[00:00:03] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:03] [1]First boot done.
[00:00:03] Sending second loader.
[00:00:08] Second loader sent ok.
New flash protocol detected.
[00:00:08] Reading: system
System name: system
Phone and firmware have same android
[00:00:08] Reading: miscdata
[00:00:08] Reading: l_fixnv1
NVRAM saved to: C:\Users\Sanju\Documents\spreadtrum_module\flashmo de_nvram_backup\_911661507180369\_911661507180369_ nvram_backup.tar
[00:00:20] Start write: l_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting LTE_Calibration id: 0xA05
Protecting LTE_Cali_Band1 id: 0x9C4
Protecting LTE_Cali_Band2 id: 0xA04
Protecting LTE_Cali_Band3 id: 0x9C8
Protecting LTE_Cali_Band4 id: 0x9C9
Protecting LTE_Cali_Band5 id: 0x9CA
Protecting LTE_Cali_Band6 id: 0x9CB
Protecting LTE_Cali_Band7 id: 0x9CC
Protecting LTE_Cali_Band8 id: 0x9CD
Protecting LTE_Cali_Band9 id: 0x9CE
Protecting LTE_Cali_Band10 id: 0x9CF
Protecting LTE_Cali_Band11 id: 0x9D0
Protecting LTE_Cali_Band12 id: 0x9D1
Protecting LTE_Cali_Band13 id: 0x9D2
Protecting LTE_Cali_Band14 id: 0x9D3
Protecting LTE_Cali_Band15 id: 0x9D4
Protecting LTE_Cali_Band16 id: 0x9D5
Protecting LTE_Cali_Band17 id: 0x9D6
Protecting LTE_Cali_Band18 id: 0x9D7
Protecting LTE_Cali_Band19 id: 0xA01
Protecting LTE_Cali_Band20 id: 0xA02
Protecting LTE_Cali_Band21 id: 0xA08
Protecting LTE_Cali_Band22 id: 0xA09
Protecting LTE_Cali_Band23 id: 0xA0A
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting GSM_Agc_Cali id: 0x4
Protecting BandSelect id: 0xA18
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting SUBSIDY_BLOB id: 0x91B
Protecting SUBSIDY_PUBKEY id: 0x91D
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
Protecting SIMLOCK_SIGN id: 0x1A3
Protecting SIMLOCK_PK id: 0x1A4
Protecting SIMLOCK_CUSTOMIZE_DATA id: 0x1F0
Protecting SIMLOCK_USER_DATA id: 0x1F1
Protecting SIMLOCK_NVCONTROL_KEY id: 0x1F2
Protecting SIMLOCK_KEY id: 0x1F4
Protecting SIMLOCK_CFG id: 0x7E4
Protecting GSM_rf_8psk_tx_gain_table id: 0xAA3
[00:00:27] Start write: prodnv
[00:00:27] Format: uboot
[00:00:27] [uboot]Format OK.
[00:00:27] Format: uboot_log
[00:00:27] [uboot_log]Format OK.
[00:00:27] Start write: splloader
[00:00:28] Start write: vbmeta
[00:00:28] Start write: l_modem
[00:00:36] Start write: l_deltanv
[00:00:36] Start write: l_ldsp
[00:00:42] Start write: l_gdsp
[00:00:45] Start write: pm_sys
[00:00:45] Start write: gpsgl
[00:00:46] Start write: gpsbd
[00:00:46] Start write: wcnmodem
[00:00:46] Start write: boot
[00:00:57] Start write: dtb
[00:00:59] Start write: dtbo
[00:01:02] Start write: recovery
[00:01:14] Start write: system
[00:14:40] Start write: userdata
[00:14:41] Start write: logo
[00:14:42] Start write: fbootlogo
[00:14:43] Start write: cache
[00:14:43] Format: l_runtimenv1
[00:14:43] [l_runtimenv1]Format OK.
[00:14:43] Format: misc
[00:14:43] [misc]Format OK.
[00:14:43] Start write: trustos
[00:14:44] Start write: sml
[00:14:44] Start write: vendor
[00:16:36] Start write: product
[00:17:04] Start write: persist
[00:17:05] Start write: uboot
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\Sanju\Documents\spreadtrum_module\Saved_L ogs\_writepac__8.txt
Total Time: 00:17:12
Done.
 
Code: 
Prestigio Muze X5 Flash done

EXE: Ultimate Unisoc Module v0.2
ACTION: Flash Firmware.
Selected firmware: PSP5518DUO.20180615.1.0.11.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM56)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:01] [1]First boot done.
[00:00:01] Sending second loader.
[00:00:06] Second loader sent ok.
[00:00:06] Reading: system
System name: system
Phone and firmware have same android
[00:00:06] Reading: miscdata
[00:00:06] Reading: l_fixnv1
NVRAM saved to: C:\Users\user\Documents\spreadtrum_module\flashmod e_nvram_backup\_358************\_358***********_nv ram_backup.tar
[00:00:13] Making flash ic repartition.
[00:00:13] Start write: l_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting LTE_Calibration id: 0xA05
Protecting LTE_Cali_Band1 id: 0x9C4
Protecting LTE_Cali_Band2 id: 0xA04
Protecting LTE_Cali_Band3 id: 0x9C8
Protecting LTE_Cali_Band4 id: 0x9C9
Protecting LTE_Cali_Band5 id: 0x9CA
Protecting LTE_Cali_Band6 id: 0x9CB
Protecting LTE_Cali_Band7 id: 0x9CC
Protecting LTE_Cali_Band8 id: 0x9CD
Protecting LTE_Cali_Band9 id: 0x9CE
Protecting LTE_Cali_Band10 id: 0x9CF
Protecting LTE_Cali_Band11 id: 0x9D0
Protecting LTE_Cali_Band12 id: 0x9D1
Protecting LTE_Cali_Band13 id: 0x9D2
Protecting LTE_Cali_Band14 id: 0x9D3
Protecting LTE_Cali_Band15 id: 0x9D4
Protecting LTE_Cali_Band16 id: 0x9D5
Protecting LTE_Cali_Band17 id: 0x9D6
Protecting LTE_Cali_Band18 id: 0x9D7
Protecting LTE_Cali_Band19 id: 0xA01
Protecting LTE_Cali_Band20 id: 0xA02
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:16] Start write: prodnv
[00:00:17] Format: uboot
[00:00:17] [uboot]Format OK.
[00:00:17] Start write: splloader
[00:00:17] Start write: l_modem
[00:00:20] Start write: l_ldsp
[00:00:20] Start write: l_gdsp
[00:00:21] Start write: l_warm
[00:00:21] Start write: pm_sys
[00:00:21] Start write: wcnfdl
[00:00:21] Start write: wcnmodem
[00:00:22] Start write: boot
[00:00:25] Start write: trustos
[00:00:25] Start write: vmm
[00:00:25] Start write: recovery
[00:00:28] Start write: system
[00:09:49] Start write: userdata
[00:09:53] Start write: logo
[00:09:54] Start write: fbootlogo
[00:09:54] Start write: cache
[00:09:57] Format: l_runtimenv1
[00:09:57] [l_runtimenv1]Format OK.
[00:09:57] Format: misc
[00:09:57] [misc]Format OK.
[00:09:57] Start write: persist
[00:09:58] Start write: sysinfo
[00:10:00] Start write: uboot
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\_writepac__3.txt
Total Time: 00:10:04
Done.
 
Code: 
ZTE Blade A31 Removing frp done

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.2
SELECTED: SC9863A_EMMC_ZTE([sign 1]A10+)
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM28)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TC0H73_3_20_35
***************
[S]Manufacturer: ZTE
[S]Brand: ZTE
[S]Device: P963F70
[S]Model: ZTE Blade A31RU
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: s9863a1h10_go_32b
Build description: s9863a1h10_go_32b_general-user 11 RP1A.201005.001 20210518.203348 release-keys
Product name: RU_P963F70
SW Version: GEN_RU_P963F70V1.0.0B08
Board: s9863a1h10_go_32b
Build Id: RP1A.201005.001
Android Release: 11
Android Version: GEN_RU_A31RU_V1.0
Security patch: 2021-05-05
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\GEN_RU_A31RU_V1.0_erase_frp.txt
Total Time: 00:00:16
Done.
 
Code: 
philco hit p10 (Unisoc SC9863A)
reset password
reset frp

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.2
SELECTED: SC9863A_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM30)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TBVC92_10_15_1
***************
[S]Manufacturer: Philco
[S]Brand: Philco
[S]Device: HIT_P10a
[S]Model: HIT P10a
Build ID: RP1A.201005.001
CPU arhitecture: arm64-v8a
Manufacturer: Philco
Build product name: HIT_P10a
Build description: s9863a3h10_Natv-user 11 RP1A.201005.001 26519 release-keys
Product name: HIT_P10a
Board: HIT_P10a
Build Id: RP1A.201005.001
Model: HIT P10a
Android Release: 11
Security patch: 2021-06-05
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\brno\Documents\spreadtrum_module\Saved_Lo gs\_erase_frp_1.txt
Total Time: 00:00:26
Done.
 
Code: 
reset frp philco hit max ls039e done

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.1
SELECTED: SC9863A_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM14)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TBGH40_15_17_20
***************
[S]Manufacturer: Philco
[S]Brand: Philco
[S]Device: Hit_Max
[S]Model: Hit Max
Build ID: RP1A.201005.001
CPU arhitecture: arm64-v8a
Build product name: Hit_Max
Build description: s9863a1c10_Natv-user 11 RP1A.201005.001 13319 release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: Philco_LS039E_V06_20210331
Security patch: 2021-03-05
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\Saved_Logs\Philco_LS039E_V06_ 20210331_erase_frp.txt
Total Time: 00:00:21
Done.
 
Code: 
Prestigio Wize G3 PSP3510 Removing frp done

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.2
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Loader format:OLD
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM56)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
***************
Build ID: MRA58K
CPU arhitecture: armeabi-v7a
Manufacturer: Prestigio
Hardware: RS617A_V1.0.0
Platform: sc8830
Build product name: PSP3510DUO
Build description: PSP3510DUO-user 6.0 MRA58K eng.root.20170105.120129 release-keys
Product name: PSP3510DUO
Board: SC7731C
Build Id: MRA58K
Model: PSP3510DUO
Android Release: 6.0
Android Version: PSP3510DUO.20170920.1.0.05
Security patch: 2017-01-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\PSP3510DUO.20170920.1.0.05_erase_frp.txt
Total Time: 00:00:13
Done.
 
Code: 
Realme C21Y rmx3263 Reset done

Action: Reset Phone.
Detecting phone, wait...
Using connection mode 1
Detected: SPRD U2S Diag (COM56)

Platform Version: MOCORTM_20A_W22.07.3_Debug
Project Version: sharkl5pro_pub
BASE Version: 4G_MODEM_20A_W22.07.3
HW Version: sharkl5pro_modem
02-16-2022 03:41:59
Build number: S19610AA1_ctcc-user 11 RP1A.201005.001 20302 release-keys
EMMC DDR SIZE :15.00 GB+-1.00 MB
UID: 277ec9cc086a74df48e62c8dcc41967801a63d1492ab3da90e dc6eefea70cbb6
AT UID: W+SPGETUID: 98bf2aa0b8817c9091b95a9fcdb1e043bae2d0ae1325e4dc55 859a9b57dd8a55

IMEI 1: 860013*********
IMEI 2: 860013*********
IMEI 3: 000000000000000
IMEI 4: 000000000000000
DONE
DONE
DONE
DONE
Done.
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\S19610AA1_ctcc-user11RP1A.201005.00120302release-keys_860013058168255_diag_reset_phone.txt
 
Code: 
multilaser ms107
multilaser g max
reset password
reset frp
done

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.1
SELECTED: SC9863A_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM14)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T3AK03_10_27_18
***************
Build ID: V16_20201208
CPU arhitecture: armeabi-v7a
Manufacturer: Multilaser
Hardware: s9863a1h10_go_32b
Build product name: Multilaser_G_Max
Build description: s9863a1h10_go_32b_Natv-user 9 V16_20201208 4 release-keys
Product name: Multilaser_G_Max
Board: Multilaser_G_Max
Build Id: V16_20201208
Model: Multilaser_G_Max
Android Release: 9
Android Version: Multilaser_G_Max.V16_20201208
Security patch: 2020-12-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\Saved_Logs\Multilaser_G_Max.V 16_20201208_erase_frp.txt
Total Time: 00:00:23
Done.
 
You must log in or register to reply here.
Back
Top