NCK Premium v2 - HELP - How to use Setups / Videos /Guides / Tutorials / Pinouts / How To?

Status
Not open for further replies.
Fast Unlocking

Fast Unlocking

Administrator
Staff member
Country
Jordan
Offline
Country flag
Here is the Link all Videos Made By NCK Team to help users, more will come soon.

NCK Team - YouTube

Latest Video:

ZTE V768 Unlocking By NCK Team

ZTE V768 Unlocking By NCK Team - YouTube


1st You must Download support access exe, then extract from zip file.

Support Access Download link:

Download Area



How to Install main module?

Note: this card is already activated, so software will start normally to know how to update for fist time use, check the post number 3.


How to update NCK Dongle in order to start using it?


How to install NCK Dongle Samsung module?



How to install NCK Dongle MTK Flasher module?

 
Last edited:
Many users have problems with the smart card drivers in Win7 64 bit. The problem is that the smart card driver is not installed properly, therefore removing the dongle/box after inserting again, windows tries to reinstall the driver, but fails.


Here is the 100% solution and the files:

4shared link: NCK_SmartCard_Driver_Win7_64.zip
mega link: NCK_SmartCard_Driver_Win7_64.zip

Proper driver installing, step by step:

Code: 
Extract the Driver Files From the Compressed Download
Open Device Manager From the Control Panel in Windows 7
Locate the Hardware Device You Want to Update the Drivers For
Open the Hardware Device's Properties
Start the Update Driver Software Wizard
Choose to Locate and Install Driver Software Manually
Choose to Pick From a List of Device Drivers on Your Computer
Click the Have Disk Button
Click the Browse Button
Navigate to the Folder with the Extracted Driver Files
Choose NCK_SmartCard_Driver_Win7_64/oem18.inf File in the Folder
Confirm Your Folder Choice
Start the Windows 7 Driver Installation Process (click Next)
Wait While Windows 7 Installs the Updated Driver
Close the Update Driver Software Window
Done - The windows has successfully updated your Smart Card driver
 
How to start using NCK Dongle read below:

1. Download setups software
Support software

2. Download drivers for your card reader, exits 3 card readers type for nckdongle.
Standard PCSC driver(pkey like)

Rockey200 drivers

SCR3310 v2.0 USB SC Reader

3. Insert dongle in usb port and install needed driver.

4. Start Support access software.
If all ok you can see your serial number and can access support.
If exe not show serial number and acces directly nckdongle.com page this meen problem with drivers or with dongle(card reader).

Please note: some antivirus programs may give a warning, ignore it, there is no virus, its smartcard protection.

After downloading NCK Dongle main installer.

For New users also need to follow the above steps then carry on with the steps below:

Start NCK Dongle Main Module, Press Update card, after updating you must close software and start it again.

That's all and you are ready use NCK Dongle & Make some money ;)

If you see an error like below when trying to update card:

Code: 
CardID_to calculate: 000000x
CardID:00000x
Response:2
Card not registered in server

then send "orbita" or "Fast Unlocking" a PM with card serial and the reseller name and your date of purchase.

We will then add your card into server database.

PLEASE NOTE: If after the card update, application still says update the card counter then please check the clock/time of your computer as the card counter update is based on computer local time and server time (also make sure your date and time is correct).
 
How to Access NCK Dongle Support Area From Main NCK Dongle Module to Download & update new version update or firmwares or drivers for current NCK Dongle users.

 
MSVCR100.DLL is C Runtime Library used by many applications.

There are very little chances that this file does not exist on your system.

In such case, running NCK Box will show you error saying:

"The Program can't start because MSVCR100.DLL is missing from your computer."

Solution is easy, just download attached archive and extract it.

You will have MSVCR100.DLL. Place it either in C:\NCKBOX folder or copy it to your System folder (ie. C:\Windows\System32).
 
Much antivirus softwares deleting important files without warning, then the NCK products do not work properly.
As an example here Panda IS 2013, but that's the way it works in many other software products, see this:


Suggested solutions:

Use AVAST antivir, great work with the GSM softwares, do not delete important files.
All NCK products install one folder (example: C:/NCK) and add complete folder in antivirus software white list, exceptions list, etc.
If you have deleted important files, NCK reinstallation required.

I hope this could help you.
 
MY PHONE HAVE NULL IMEI, HOW TO SOLVE?

Usually phones can lost imei after bad flashing, or corrupting nvram partition.
But keep in mind, new phones can lost imei also if kernel was modified or another partition patched/damaged.

Before do any play with imei, backup nvram is recommended.
If after successful imei repair, phone still show invalid imei, most possible exist another problem.

Also if after repair imei , phone have connection problems, wifi, e.t.c. , most possible NVRAM is corrupted.

In this case need to write good nvram and after repair imei.
Phone can have also hardware damage.
If phone have hardware problems, need to repair first hardware part.

Good idea also is to dump with adb modem and kernel log.
This logs can help to identify problem.
 
How to Change IMEI in Blackberry Qcomm Phones Using NCK Dongle & NCK Box


How to read Blackberry codes in supported models


How to Unlock 0 MEP With NCK Box or NCK Dongle

How to Wipe & Flash Blackberry phones with NCK Box & NCK Dongle

 
How To Flash/Repair Huawei Phones
​


[*For All Operations, you need to select HUAWEI CDMA Handset - Application Interface Port.]
[Please check Device Manager to confirm assigned Port Number.]
[You can select Maximum Baud Rate for these phones.]


To Fix "Phone Locked, Contact Service Center"
- Connect phone in Normal Mode.
- Make sure there is no RUIM in Phone
- Start NCK CDMA, Goto Huawei Page.
- Select any Huawei Model.
- Select Correct Port*.
- Click on Fix CS, and you are done.





To Fix "fs.pm error", "phone turn off when calling/after few seconds" or other FileSystem related problem:
- Connect phone in Emergency Mode ( 5 + PWR or 5 + USB).
- Start NCK CDMA, Goto Huawei Page.
- Select Correct Huawei Model (Important).
- Select Correct Port*.
- Tick EFS Checkbox, File selection button will be enabled.
- Click on [..] button and select .MBN or .BIN file (Change Files of Type accordingly in Open File Dialog).
- Click on Write and you are done.





To Erase EFS:
- Connect phone in Emergency Mode ( 5 + PWR or 5 + USB).
- Start NCK CDMA, Goto Huawei Page.
- Select Correct Huawei Model (Important).
- Select Correct Port*.
- Click on Erase EFS and you are done.





To Completely Flash The Phone:
- Connect phone in Emergency Mode ( 5 + PWR or 5 + USB).
- Start NCK CDMA, Goto Huawei Page.
- Select Correct Huawei Model (Important).
- Select Correct Port*.
- Tick APP Checkbox, File selection button will be enabled.
- Click on [..] button and select .MBN or .BIN file (Change Files of Type accordingly in Open File Dialog).
- Tick EFS Checkbox, File selection button will be enabled.
- Click on [..] button and select .MBN or .BIN file (Change Files of Type accordingly in Open File Dialog).
- Click on Write and you are done.


Enjoy the Smartest, Safest and Fastest CDMA Tool! ;)
 
let s take OT-800 as an example:

OT-800X-PMPT1

How do we name flash file:

OT-803 - name of the model, in our case it's Alcatel One Touch 800
X OR A OR D etc.. - base-band settings ("A": 850/1900 band, "X": 900/1800 band & "D" Dual SIM).
PMPT1 - Provider ID (firmware branding) usually it is written like this 2XPMPT1 but we take the main letters of provider id which is the last 5 letters.
XR46CP1A - Secro Name: Security block version.
Locked - means that after flashing phone will be locked.
Unlocked - means that after flashing phone will be unlocked.
Samsung OR ONYX OR any other flash chip name - is the flash IC chip inside phone so you must flash with same firmware for this flash chip.
IF AFTER OT (ONE TOUCH) you see the letter V - example OT-V this mean Vodafone Phone : OT-V555 = Vodafone-555.
 
Status
Not open for further replies.
Back
Top