Post here Successfully Unlocked/Calculated/Flashed/Repaired Phones via NCK Premium v2

KRIP_K6b FRP Done


[0]Custom loader: cust_7731e_a10.loader
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
SELECTED: ORANGE RIGA
ACTION: Reset Userdata and Remove FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM13)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
Read partition info is supported by loader.
***************
Manufacturer: KRIP
Brand: KRIP
Device: K6b
Model: K6b
Build ID: QP1A.190711.020
CPU arhitecture: armeabi-v7a
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: KRIP_K6b
Build description: KRIP_K6b-user 10 QP1A.190711.020 21925 release-keys
Product name: K6b
Build Id: QP1A.190711.020
Model: K6b
Android Release: 10
Android Version: KRIP_K6b_EN_10GO_85901921_HW1_V009_20210624
Security patch: 2021-05-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[misc]Formating userdata, wait...
Wait untill phone will restart.
Exe version: NckBox Spreadtrum Module 2.1.7
Log saved:
C:\Users\Phonestore\Documents\spreadtrum_module\Sa ved_Logs\KRIP_K6b_EN_10GO_85901921_HW1_V009_202106 24_format_userdata_misc.txt
Total Time: 00:00:33
Done.
 
Code: 
Blu_g0270ww frp done with custom loader
0]Custom loader: BLU_G0270WW_V9.0.04.05_GENERIC_200715-2234.loader
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
SELECTED: ORANGE RIGA
ACTION: Format Userdata(misc)
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM12)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T3NR17_1_9_26
Manufacturer: BLU
Hardware: s9863a1h10
Build product name: G0270WW
Build description: G60-user 9 PPR1.180610.011 160 release-keys
Product name: G60
Build Id: PPR1.180610.011
Model: G60
Android Release: 9
Android Version: BLU_G0270WW_V9.0.04.17_GENERIC 28-12-2021 10:33
Security patch: 2022-01-05
This phone have frp partition.
[misc]Formating userdata, wait...
Wait untill phone will restart.
Exe version: NckBox Spreadtrum Module 2.1.7
Log saved:
C:\Users\Phonestore\Documents\spreadtrum_module\Sa ved_Logs\s9863a1h10_BLU_G0270WW_V9_0_04_17_GENERIC 28-12-20211033_format_userdata_misc.txt
Total Time: 00:00:25
Done.
 
HYUNDAI E485 FRP DONE...USE VOL UP



Spreadtrum SP7731e Board
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
SELECTED: SC7731E_EMMC_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM37)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TCUR23_23_33_40
***************
Manufacturer: HYUNDAI
Brand: HYUNDAI
Device: E485
Model: E485
Build ID: QP1A.190711.020
CPU arhitecture: armeabi-v7a
Hardware: sc7731e_1h20_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: k112
Build description: k112-user 10 QP1A.190711.020 1627462054 release-keys
Build Id: QP1A.190711.020
Android Release: 10
Android Version: QP1A.190711.020 release-keys
Security patch: 2021-08-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NckBox Spreadtrum Module 2.1.5
Log saved:
C:\Users\user\Documents\spreadtrum_module\Saved_Lo gs\QP1A_190711_020release-keys_erase_frp.txt
Total Time: 00:00:19
Done.
 
Exe version: NCKDongle AndroidMTK 2.8.3
Selected model: 0-By CPU AUTO
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(64) : MediaTek PreLoader USB VCOM (Android) (COM64)
[64] \\?\usb#vid_0e8d&pid_2000#5&2551f520&0&12#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[82]META Port Detected: MediaTek USB VCOM (Android) (COM82)
USB\VID_0E8D&PID_2007\5&2551F520&0&12
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V188.5
[META]HW_VER : TK_MD_L4_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 352425182xxxxxxx
Phone imei[2] : 352425182xxxxxxx
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[helio]Wait untill phone will start charging.
[0]All done.
 
Exe version: Avengers Box MTK 0.8.5
Selected model: Alcatel OT-5017A
Action: Unlock
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(5) : MediaTek PreLoader USB VCOM_V1633 (Android) (COM5)
[5] \\?\usb#vid_0e8d&pid_2000#5&2d4ff0d5&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(7) : MediaTek DA USB VCOM (Android) (COM7)
[7] \\?\usb#vid_0e8d&pid_2001#5&2d4ff0d5&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Phone have OTP partition.
MODEL FROM PROINFO: 5017A-2ATUAU1
SECRO FROM PROINFO: X1B0OD00BP10
OTP IMEI: 01437900XXXXXXX
[generic]Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:98) Code : 1933827422247060
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[2780]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
 
UNLOCK VORTEX Z22 DONE

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU MT6739
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(82) : MediaTek PreLoader USB VCOM (Android) (COM82)
[82] \\?\usb#vid_0e8d&pid_2000#6&36c9660&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[102]META Port Detected: MediaTek DA USB VCOM (Android) (COM102)
USB\VID_0E8D&PID_2007\6&36C9660&0&4
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V222.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 351374620079537
Phone imei[2] : 351374620079545
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[0]All done.
 
UNLOCK DIGICEL DL4 DONE

ACTION: Direct Unlock
Detecting phone, wait...
Using connection mode 1
Detected: SCI USB2Serial (COM91)

Platform Version: MOCORTM_20A_W21.15.3_Debug
Project Version: sharklp
BASE Version: 4G_MODEM_20A_W21.15.3
HW Version: sc9832e_modem
06-17-2022 19:34:05
Build number: DL4-user 11 RP1A.201005.001 22372 release-keys
EMMC DDR SIZE :30.00 GB+2.00 GB
UID: 04303eee3ed19718955996baeebb8b8b4839621d4c6f8c11bf 2c3bc2996a85ec

IMEI 1: 353717422115420
IMEI 2: 867400020316620
IMEI 3: 867400020316638
IMEI 4: 867400020316646
BT: 00271524F057
WIFI: 00004618CEEF
Reading simlock backup, wait....
Saved to: C:\Users\cell center\Documents\spreadtrum_module\diag_nvram_back up\DL4-user_11_RP1A_201005_001_22372_release-keys_353717422115420__diag_simlock_nvram_backup.ta r

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 80863663
Sim 2 Unlock Code: 41023788
Warning, this is factory key, some opperators can modify factory key.
Unlock is supported for this phone
Writing simlock...
Writing simlock ok
Done.
Exe version: NckBox Spreadtrum Module 2.1.7
Log saved:
C:\Users\cell center\Documents\spreadtrum_module\Saved_Logs\DL4-user11RP1A_201005_00122372release-keys_353717422115420_diag_simlock_unlock.txt
Report PostIP
​
 
UNLOCK PCD P50 USING BLU STUDIO DONE

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: Blu BLU STUDIO 5.0 II
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(82) : MediaTek PreLoader USB VCOM (Android) (COM82)
[82] \\?\usb#vid_0e8d&pid_2000#6&36c9660&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[102]META Port Detected: MediaTek DA USB VCOM (Android) (COM102)
USB\VID_0E8D&PID_2007\6&36C9660&0&4
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V206.6.P1
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 359363330904524
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[helio]Wait untill phone will start charging.
[0]All done.
 
You must log in or register to reply here.
Back
Top