NCK Box Videos - How to use/flash/unlock/etc...

Status
Not open for further replies.
Fast Unlocking

Fast Unlocking

Administrator
Staff member
Country
Jordan
Offline
Country flag
★★★ Alcatel MTK Firmwares In Support Explanation ★★★
let s take OT-800 as an example:

OT-800X-PMPT1

How do we name flash file:

OT-803 - name of the model, in our case it's Alcatel One Touch 800
X OR A OR D etc.. - base-band settings ("A": 850/1900 band, "X": 900/1800 band & "D" Dual SIM).
PMPT1 - Provider ID (firmware branding) usually it is written like this 2XPMPT1 but we take the main letters of provider id which is the last 5 letters.
XR46CP1A - Secro Name: Security block version.
Locked - means that after flashing phone will be locked.
Unlocked - means that after flashing phone will be unlocked.
Samsung OR ONYX OR any other flash chip name - is the flash IC chip inside phone so you must flash with same firmware for this flash chip.
IF AFTER OT (ONE TOUCH) you see the letter V - example OT-V this mean Vodafone Phone : OT-V555 = Vodafone-555.

BR

NCK Team
 
[FAQ] My Alcatel Android phone have null IMEI. How to solve?
All Alcatel phones have IMEI in OTP area.
This mean IMEI, can't be destroyed by software.

Sometimes we have null imei.
This can happen usually in next cases:

1. Security corrupted: Full flash with format usually solve this.
2. NV area corrupted: Need to erase nv area and after perform flash with format.
3. Incompatible hardware modem with modem firmware:Need to write correct version.
4. Hardware damage, in this case need to repair phone.

How to know initial phone version if phone come already damaged:

Need to read PRO_INFO partition.
Make boot info with display partition info checked.
In long list will be line with PRO_INFO begin and end adreses.
Need to use this adreses and to read firmware using this values.
After upload in forum or use hex editor.

Version and phone name are in plain in this partition.
 
How to Change IMEI in Blackberry Qcomm Phones Using NCK Dongle & NCK Box
How to read Blackberry codes in supported models
How to Unlock 0 MEP With NCK Box or NCK Dongle


How to Wipe & Flash Blackberry phones with NCK Box & NCK Dongle
 
[HELP] NCK BOX HELP How to USE/UNLOCK/Flash/Install - Info & PDF
1. Download from support archive with custom recovery.
1.1.If drivers installed skip step 2.
2. Power on phone complete and install drivers, must be mounted volume with phone drivers, so install from this volume.
If custom recovery already flashed go to step 9.
3. Put phone in FastBoot mode holding Vol- and power On(5-10sec)
4. Put usb cable and wait until install drivers(check in device manager if all ok).
5. Open nckbox.exe, select Fastboot_utils tab.
6. Tick flash phone in recovery utils.
7. Click on load and send and select recovery image.
8. Wait until finish, remove cable, remove battery(for 5...6 sec, if not phone will auto power on).
9. put battery, keep Vol+ and power on until phone power in recovery mode.
10. Go to Huawei android tab, select correct model and press check.
11. If all ok press unlock.

PS
Unlock need make from recovery mode.
 
Status
Not open for further replies.
Back
Top