★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★

Code: 
Oppo f9 pro flash with TP
Code:
Operation    :    Flash OFP Firmware
Firmware    :    CPH1823EX_11_F.17_210126_cc65c34e.ofp
Using Preloader from Firmware
Waiting for Device...Found
Port    :    MediaTek USB Port_V1632 (COM5)
Device Path    :    \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver    :    MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode    :    BROM
Hw ID    :    MT6771 [0788] Helio P60/P70/G80
Details    :    8A00,CA00,0000
Sec. Config    :    [SBA:True] [SLA:False] [DAA:True]
MEID    :    7827697F9C80BFDBDD1A3D6DED95CA4C
SoC ID[0]    :    B1D5AE0A008B724C72110DDD9B26AD7B
SoC ID[1]    :    014DAC76E947DCFA1D580D961AA5572D
Running Exploit...Done
Loading EMI Config from Preloader...OK
Sec. Config    :    [SBA:False] [SLA:False] [DAA:False]
Using DA    :    MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection    :    brom
Speed    :    HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID    :    90014A484347386134A52167843575DD [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM    :    0x0000000000039000 [228.00 KB]
Ext. RAM    :    0x0000000180000000 [6.00 GB]
Flash ID    :    HCG8a4
CID    :    90014A484347386134A52167843575DD
BOOT1    :    0x0000000000400000 [4.00 MB]
BOOT2    :    0x0000000000400000 [4.00 MB]
RPMB    :    0x0000000000400000 [4.00 MB]
USERAREA    :    0x0000000E8F800000 [58.24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Platform    :    mt6771
And. Ver.    :    10
Build Dt.    :    Tue Sep 15 17:01:13 CST 2020
Display ID    :    QP1A.190711.020 release-keys
Locale    :    en-US
Patch    :    2020-09-05
Writing preloader [preloader_oppo6771.bin]...OK
Writing recovery [recovery.img]...OK
Writing md1img [md1img.img]...OK
Writing spmfw [spmfw.img]...OK
Writing scp1 [scp.img]...OK
Writing scp2 [scp.img]...OK
Writing sspm_1 [sspm.img]...OK
Writing sspm_2 [sspm.img]...OK
Writing cam_vpu1 [cam_vpu1.img]...OK
Writing cam_vpu2 [cam_vpu2.img]...OK
Writing cam_vpu3 [cam_vpu3.img]...OK
Writing lk [lk.img]...OK
Writing lk2 [lk.img]...OK
Writing boot [boot.img]...OK
Writing logo [logo.bin]...OK
Writing odmdtbo [odmdtbo.img]...OK
Writing tee1 [tee.img]...OK
Writing tee2 [tee.img]...OK
Writing Signature...OK
Writing odm [odm.img]...OK
Writing Signature...OK
Writing vendor [vendor.img]...OK
Writing Signature...OK
Writing system [system.img]...OK
Writing cache [cache.img]...OK
Writing Signature...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved    :    20230208_170015.log
 
Redmi Note 10 FRP done in sideload mode

Code:
Operation : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : mojito_in_global
Version : V13.0.3.0.SKGINXM
Code Base : 12
Serial : 0x1d0ec3ea
Ext Info : US, en, F, 2, 2
Model : mojito
Reading Partition Table...[92] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 8.6
 
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM15)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&2b415c2c&0&1
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6739 [0699] Unknwon
Details : 8A00,CB00,0002
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 026592BF5D484A849EE52029950CE024
SoC ID[0] : BEAF88C2260153D391B99C1E88C78B1C
SoC ID[1] : 2D0B4F6D29775CF00D2DF03EF5351CBD
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_bali.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...Failed/Unsupported
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000020000 [128,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : QD63MB
CID : 150100514436334D42015F8D06C9C689
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : motorola
Manuf. : motorola
Model : moto e6 play
Ven. Model : moto e6 play
Platform : mt6739
Device : bali
And. Ver. : 9
Prod. Name : bali
Build Dt. : Fri Dec 20 16:03:50 CST 2019
Display ID : POA29.475-62-26
Ver. Inc. : 20afe
Locale : en-US
Patch : 2019-12-05
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230210_181459.log
 
Infinixy X657 FRP Removed in 1clic
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM5 [MediaTek USB Port (COM5)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&3999aca5&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x6580, [MT6580] [Unknown]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: F5E4850E5DE5242C6EF406DD788BFE3D
Preparing device...
-- Success!
Preloader saved as : preloader_x657_h8030_230211_105901.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM10)
device path: \\?\usb#vid_0e8d&pid_2001#6&3999aca5&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]
 
Redmi 5 plus frp reset
Code:
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 Plus [msm8953] [vince]
Brand : xiaomi
Prod.Name : vince
Software : ZQL1711-vince-build-20191108142512, V11.0.2.0.OEGMIXM [Fri Nov 8 14:24:59 WIB 2019]
Android Ver. : 8.1.0
Patch Level : 2019-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.6
 
Itel vision 1 frp reset done
Code:
Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.2
SELECTED: Vision 1(P36 Play)
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM12)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T4AF30_23_31_14
***************
Build ID: PPR1.180610.011
CPU arhitecture: arm64-v8a
Manufacturer: itel
Hardware: s9863a1h10
Build product name: L6005
Build description: L6005-user 9 PPR1.180610.011 293 release-keys
Product name: F6308
Transsion device name: itel Vision1(P36 Play)
Build Id: PPR1.180610.011
Model: itel L6005
Android Release: 9
Android Version: L6005-F6308-9.0-IN-V048-20201229
Security patch: 2021-01-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
 
Redmi note 9 flash with xiaomi pro restart in logo, flash with UMT flash 100% Done!!!

Operation : Flash Scatter
Using Preloader from Firmware
Waiting for Device...Found
Port : MediaTek USB Port (COM41)
Device Path : \\?\usb#vid_0e8d&pid_0003#7&1442f9f9&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 21C646571A33F6341D12BD2821D113E7
SoC ID[0] : D29116F5CCC5E71DA60FBE8F4DB1AE11
SoC ID[1] : A879AB74C64A5A02C9E7E8AB4583AF64
Running Exploit...Done
Preloader : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68444561503303103BD1908709 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : hDEaP3
CID : 90014A68444561503303103BD1908709
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1F000000 [116,48 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : Xiaomi
Ven. Model : merlin
Platform : mt6768
And. Ver. : 12
Build Dt. : Tue Jun 7 22:29:52 CST 2022
Display ID : SP1A.210812.016
Ver. Inc. : V13.0.1.0.SJOCNXM
Locale : zh-CN
Mod. Dev. : merlin
Patch : 2022-06-01
Writing preloader [preloader_merlin.bin]...OK
Writing recovery [recovery.img]...OK
Writing vbmeta [vbmeta.img]...OK
Writing vbmeta_system [vbmeta_system.img]...OK
Writing vbmeta_vendor [vbmeta_vendor.img]...OK
Writing logo [logo.bin]...OK
Writing md1img [md1img.img]...OK
Writing spmfw [spmfw.img]...OK
Writing scp1 [scp.img]...OK
Writing scp2 [scp.img]...OK
Writing sspm_1 [sspm.img]...OK
Writing sspm_2 [sspm.img]...OK
Writing lk [lk.img]...OK
Writing lk2 [lk.img]...OK
Writing boot [boot.img]...OK
Writing dtbo [dtbo.img]...OK
Writing tee1 [tee.img]...OK
Writing tee2 [tee.img]...OK
Writing exaid [exaid.img]...OK
Writing cust [cust.img]...OK
Writing super [super.img]...OK
Writing cache [cache.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230213_112934.log
 
honnor 50 lite frp done king umt model not listed but done

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Invalid response from device!
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 0100A401
OPK_DATA : 89CF13A6FB967253B3EC80DAA609EA1E2DD855F6B2DA88B486 45CDFB8ECBFDB2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01D94000] [0x00000800] [0x00000800] [0x00000800] [0x00033800] [0x00001800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...Failed
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 8.4.1
 
vivo y11 patren and frp

Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : , eng.compil.20220316.164614 [Wed Mar 16 16:43:37 CST 2022]
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 8.4.1
 
vivo y11 patren and frp

Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : , eng.compil.20220316.164614 [Wed Mar 16 16:43:37 CST 2022]
Android Ver. : 11
Patch Level : 2022-03-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 8.4.1
 
You must log in or register to reply here.
Back
Top