★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★

x650c frp done king umt


Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&f2ea658&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : , []
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 75024A11C7782397609C87CE06A3439A
SoC ID[0] : 45AB750AB8C81DE0CFDC229F4DEAE705
SoC ID[1] : B7F84F89DDF8D64FDC394EB75FD8A497
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_x650c_h626.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A6843396150330100F4F7973799 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC9aP3
CID : 90014A6843396150330100F4F7973799
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : Infinix
Manuf. : INFINIX MOBILITY LIMITED
Model : Infinix X650C
Ven. Model : Infinix X650C
Platform : mt6765
Device : Infinix-X650C
And. Ver. : 9
Prod. Name : H626
Build Dt. : Tue Jan 5 21:32:55 CST 2021
Display ID : X650C-H626DEJ-P-210105V317
Ver. Inc. : DEJ-210105V317
Locale : en-US
Patch : 2021-01-05
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230218_101624.log
 
Itel L5002P Frp done
Code:
Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.1
SELECTED: A25 Pro(L5002P)
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM3)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TB8U77_2_37_25
***************
Build ID: PPR1.180610.011
CPU arhitecture: armeabi-v7a
Manufacturer: itel
Hardware: sp9832e_1h10_go
Build product name: L5002P
Build description: L5002P-user 9 PPR1.180610.011 161 release-keys
Product name: F3210
Transsion device name: itel A25 Pro
Build Id: PPR1.180610.011
Model: itel L5002P
Android Release: 9
Android Version: L5002P-F3210-9.0-OP-V033-20211224
Security patch: 2022-01-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Done.
 
Oppo r9sk frp reset done
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM39)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : C00D890AAF48CA22BF581579142E7466BC762BAB0F1A4B23BF A1C9BB8B49C5FD
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_008]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO OPPO R9s [msm8953] [R9s]
Brand : OPPO
Prod.Name : R9s
Software : R9s_11_A.21_170414, eng.root.20170414.181248 [Fri Apr 14 18:17:29 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-03-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.5
 
flash xiaomi redmi 9 (lancelot) done
method sideload

Operation : Flash Miui Package (Sideload)
Searching for phone in sideload mode...Found
Device Id : lancelot_global
Version : V13.0.2.0.SJCMIXM
Code Base : 12
Serial : 0x773185220da2b4aa0f09ff409bf00a40840ee4fa
Ext Info : BR, pt, F, 2, 2
Model : lancelot
Package : miui_LANCELOTGlobal_V13.0.4.0.SJCMIXM_cf8fa9fcdb_1 2.0.zip
Calculating Firmware Hash...OK
Requesting Token...OK
Sending Package...Completed
Operation Finished.
QcFire Ver. 8.6
 
Code: 
Huawei P30 lite frp done
Code:
Operation    : Fastboot Info
Searching for Device in FastBoot Mode...OK
Model    : MAR-LX1A
Build    : MAR-L21A 12.0.0.251(C432E3R2P2) 
BL Status    : Locked
User Status    : Locked
Operation Finished.
UltimateHST v0.2
Code:
Operation    : Reset FRP
Searching for COM1.0 Device...Found!
COM17    : HUAWEI USB COM 1.0 (COM17)
Opening Port...OK
Platform    : Kirin_710
Sending Loader...[1]..[2]..[3]..Done
Reading Partition Table...Done
Erasing FRP Data...Done
Hold power button to reboot device.
Operation Finished.
UltimateHST v0.2
 
Redmi 11E Frp done last security
Code:
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1633 (COM7)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3b2e6861&2&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 7E6F621F4324B3AAE3E04C8B9E604484
SoC ID[0] : 77B4E41EDAFB7FAE5A5D76133108918D
SoC ID[1] : 248CF5E1359A92FC77348BB14F37C2BD
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_light.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : AD01484E38543036315A474B58303132 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : HN8T061ZGKX012
CID : AD01484E38543036315A474B58303132
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : Xiaomi
Ven. Model : 22041219G
Platform : mt6833
And. Ver. : 12
Build Dt. : Fri Feb 3 15:09:23 CST 2023
Display ID : AN6138A-light-build-20230203150015
Ver. Inc. : V13.0.11.0.SLSMIXM
Locale : en-GB
Mod. Dev. : light_global
Patch : 2023-02-01
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
 
Code: 
Xiaomi Redmi 3s Hang on LOGO done by full flashing
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM38)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 3S [msm8937] [land]
Brand : Xiaomi
Prod.Name : land
Software : MMB29M, V98.0.3.0.MALMIDG [Tue Sep 13 16:02:11 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-08-01
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system.img ] -> [system]...Done
Writing [cache.img ] -> [cache]...Done
Writing [persist.img ] -> [persist]...Done
Writing [dummy.bin] -> [config] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [lksecapp.mbn] -> [lksecapp] ...Done
Writing [lksecapp.mbn] -> [lksecappbak] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 8.6
 
Code: 
Realme c12 frp reset
Code:
Operation    :    Reset FRP
Waiting for Device...Found
Port    :    MediaTek USB Port_V1632 (COM5)
Device Path    :    \\?\usb#vid_0e8d&pid_0003#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver    :    MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode    :    BROM
Hw ID    :    MT6765 [0766] Helio P35/G35
Details    :    8A00,CA00,0000
Sec. Config    :    [SBA:True] [SLA:False] [DAA:True]
MEID    :    CAF67DACC8BF155099F80F1FA4550CDF
SoC ID[0]    :    72E2E513999D1CB4DB6D4C7613033D3D
SoC ID[1]    :    B365B239B616353BCC16E2D55DC48D45
Running Exploit...Done
Downloading Preloader...OK
Saved as    :    preloader_oppo6765.bin
Loading EMI Config from Preloader...OK
Sec. Config    :    [SBA:False] [SLA:False] [DAA:False]
Using DA    :    MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection    :    brom
Speed    :    HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID    :    90014A68423861503E0300B36D8357B1 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM    :    0x000000000003A000 [232.00 KB]
Ext. RAM    :    0x00000000C0000000 [3.00 GB]
Flash ID    :    hB8aP>
CID    :    90014A68423861503E0300B36D8357B1
BOOT1    :    0x0000000000400000 [4.00 MB]
BOOT2    :    0x0000000000400000 [4.00 MB]
RPMB    :    0x0000000001000000 [16.00 MB]
USERAREA    :    0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
And. Ver.    :    11
Build Dt.    :    Tue Jul  5 12:27:48 CST 2022
Display ID    :    RP1A.200720.011 release-keys
Ver. Inc.    :    1609743540423
Locale    :    en-US
Patch    :    2022-07-05
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved    :    20230222_130936.log
 
Xiaomi Redmi_Note8 network Done
evice : Xiaomi Redmi_Note8_ginkgo
Operation : Fix Wifi / Network
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.5.2.0.RCOINXM [Fri Jun 17 19:36:12 WIB 2022]
Android Ver. : 11
Patch Level : 2022-05-01
Loading data...Done
Fixing Wifi / Network...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 8.6
 
oppo a71 patren done for frp *813# done with umt

Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM29)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47 647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
 
You must log in or register to reply here.
Back
Top