★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★

xiomi poco x3 pro reset in sideload mode

Searching for phone in sideload mode...Found
Device Id : vayu
Version : V13.0.9.0.SJUMIXM
Code Base : 12
Serial : 0x90990595
Ext Info : , en-GB, F, 2, 2
Model : vayu_global
Formatting Data...Done
Rebooting device...Done
Operation Finished.
QcFire Ver. 8.4.1
 
oppo a37 patren+frp done

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Brand : OPPO
Prod.Name : A37f
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.4.1
 
Code: 
oppo a5s reset patren
Operation : Format FS (Safe)
Waiting for Device...Found
Port : MediaTek USB Port (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&f2ea658&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B394F77CCB661F19E0C6E6EB115458ED
SoC ID[0] : E4AB93317FAE6D48681A1F1D1F570ED0
SoC ID[1] : DA7818D6B5E7B614CC0DC9173902BB7A
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68423861503E0362B094B51787 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E0362B094B51787
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : OPPO
Platform : mt6765
And. Ver. : 8.1.0
Ven. Date : Fri Mar 19 19:45:31 CST 2021
Locale : en-US
Patch : 2021-04-05
Formatting Userdata (Safe Mode)...OK
Operation Finished.
[UltimateMTK2 v0.2]

reset frp

Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&f2ea658&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : , []
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B394F77CCB661F19E0C6E6EB115458ED
SoC ID[0] : E4AB93317FAE6D48681A1F1D1F570ED0
SoC ID[1] : DA7818D6B5E7B614CC0DC9173902BB7A
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68423861503E0362B094B51787 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E0362B094B51787
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : OPPO
Platform : mt6765
And. Ver. : 8.1.0
Ven. Date : Fri Mar 19 19:45:31 CST 2021
Locale : en-US
Patch : 2021-04-05
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
 
infinix x650c reset patren

Operation : Format Userdata
Waiting for Device...Found
Port : MediaTek USB Port (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&f2ea658&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : , []
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B12ACE323CFF69C62944357CD6117015
SoC ID[0] : 4C605BDF106C75CF28487DB2E982AD3F
SoC ID[1] : 8B0083772F8B93A9DE19D627E39727A8
Running Exploit...
Installing LibUsb Filter Driver...OKDone
Downloading Preloader...OK
Saved as : preloader_x650c_h626.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68433961503301508BA697A63B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC9aP3
CID : 90014A68433961503301508BA697A63B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : Infinix
Manuf. : INFINIX MOBILITY LIMITED
Model : Infinix X650C
Ven. Model : Infinix X650C
Platform : mt6765
Device : Infinix-X650C
And. Ver. : 9
Prod. Name : H626
Build Dt. : Fri Nov 13 17:38:22 CST 2020
Display ID : X650C-H626DEJ-P-201113V308
Ver. Inc. : DEJ-201113V308
Locale : en-US
Patch : 2020-10-05
Formatting Userdata...OK
Operation Finished.
[UltimateMTK2 v0.2]
 
oppo f5 reset patren metamode method

Operation : META Reset (Factory Reset)
Checking for exisitng device in META mode...
Existing META Port Found!
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM64)
Connecting Device...OK
Brand : OPPO
Model : CPH1723
Market Name : OPPO F5
Market Name : unknown
Manufac. : unknown
Build Date : Fri Nov 17 01:18:22 CST 2017
Ven. Date : unknown
Platform : unknown
OEM : unknown
OEM Device : unknown
Disp. ID : CPH1723EX_11_A.07_171116
Inc. Ver. : unknown
Patch Level : 2017-10-05
OTA Ver. : M6763A_11.A.07_0070_201711162246
Resetting to Factory Settings...OK
Operation Finished.
[UltimateMTK2 v0.2]
 
Hot 9 play FRP Brush..................

Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&f10c574&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 905391B01BB5F9638713DB2181F113D2
SoC ID[0] : 71F8B8F0578321C848B34BC94EC5A1F3
SoC ID[1] : A53A9E1313645078F140ADE0A2093289
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_x680b_h6215.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68433861503E030013958577C9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E030013958577C9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
Log Saved : 20230216_172257.log
 
oppo a37 frp and patren done

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Brand : OPPO
Prod.Name : A37f
Software : A37fEX_11_190711, 1480422943 [Thu Jul 11 03:29:34 CST 2019]
Android Ver. : 5.1.1
Patch Level : 2018-03-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.4.1
 
Code: 
vivo y90 frp and patren done

Operation : Format Userdata
Waiting for Device...Found
Port : MediaTek USB Port (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&f2ea658&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : F6BF3CE83DCE3E86BC844F875DD463E9
SoC ID[0] : 763362ABB68D24F9A405B5C779332308
SoC ID[1] : 9944A93B268324167FD7CD8DAE16D144
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k62v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100514436334D4201969207E156E5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QD63MB
CID : 150100514436334D4201969207E156E5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Platform : mt6765
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_1.22.0
Prod. Name : PD1818HF_EX
Build Dt. : Thu Dec 23 20:15:36 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1640261742
Locale : en-US
Patch : 2021-10-01
Formatting Userdata...OK
Operation Finished.
[UltimateMTK2 v0.2]

frp

Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM83)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&f2ea658&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : F6BF3CE83DCE3E86BC844F875DD463E9
SoC ID[0] : 763362ABB68D24F9A405B5C779332308
SoC ID[1] : 9944A93B268324167FD7CD8DAE16D144
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k62v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100514436334D4201969207E156E5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QD63MB
CID : 150100514436334D4201969207E156E5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Platform : mt6765
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_1.22.0
Prod. Name : PD1818HF_EX
Build Dt. : Thu Dec 23 20:15:36 CST 2021
Display ID : O11019 release-keys
Ver. Inc. : 1640261742
Locale : en-US
Patch : 2021-10-01
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.2]
 
ALHAMDULILLAH SUCCESSFULLY REMOVE FRP :

Device : Xiaomi Redmi 9T
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM29)
Driver Info : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221026221519, V12.5.11.0.RJQINXM [Wed Oct 26 22:16:11 CST 2022]
Android Ver. : 11
Patch Level : 2022-10-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 8.4.1
 
huawei dub-lx1 frp done

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM44)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 65001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D 15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_030]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown
Software : System 8.2.0.036(04A0) [Mon Mar 18 16:34:38 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-03-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 8.4.1
 
You must log in or register to reply here.
Back
Top