Post here Successfully Unlocked/Calculated/Flashed/Repaired Phones via NCK Premium v2

altice s22 unlock success
Exe version: NCKBox AndroidMTK 2.4
Selected model: 0-By CPU ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[22]Detected: MediaTek PreLoader USB VCOM (Android) (COM22)
\\?\usb#vid_0e8d&pid_2000#6&321130f2&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[81]META Port Detected: MediaTek USB VCOM (Android) (COM81)
USB\VID_0E8D&PID_2007\6&321130F2&0&2
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[AP]APP_VER: ALTICE_S22_DS_O_T_L_V01.4_190221_MP
[mt6580,S01]Using Algo 1
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2
[META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 354381100135x
Phone imei[2] : 354381100135x
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
[0]All done.
 
unlock altice s12 to select altice S20
i8 Exe version: NCKBox AndroidMTK 2.4
Selected connection metod: FLASH Mode
[47]META Port Detected: MediaTek USB VCOM (Android) (COM47)
USB\VID_0E8D&PID_2007\6&1BFC358E&0&4
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[AP]APP_VER: ALTICE_S12_DS_T_O_L_V02.0_190315_MP
[mt6580,S01]Using Algo 1
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V212.2
[META]HW_VER : SAGETEL_O1MP2_K80_BSP_HSPA_HW
[generic]Read simlock info.
Phone imei[1] : 35xxxxxxxxxxxxx
Phone imei[2] : 35xxxxxxxxxxxxx
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
[0]All done.
 
condor L1 plus imie repair done

Action : IMEI REPAIR.
IMEI[1] for write : xxxxxxxxxxxxx234
IMEI[2] for write : xxxxxxxxxxxxx232
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[48]Detected: MediaTek USB Port (COM48)
\\?\usb#vid_0e8d&pid_0003#6&18e8e8f9&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[61]META Port Detected: MediaTek USB VCOM (Android) (COM61)
USB\VID_0E8D&PID_200E&MI_01\7&3452D401&0&0001
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6739,S01
[AP]APP_VER: CSW1702AC_2493_T1119
[mt6739,S01]Using Algo 5
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R2.MP.V18.P2
[META]HW_VER : TK_MD_BASIC_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] xxxxxxxxxxx224
Phone imei[1] : xxxxxxxxxxx224
IMEI to repair: [2] xxxxxxxxxxx232
Phone imei[2] : xxxxxxxxxxx232
Clean Boot flag ok.
[0]All done.
 
USB Connection selected.
EXE VERSION: NCKBox MTK Tool 4.0
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM17
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 352441086921004
IMEI[2]: 352441086921004
Start read, wait....
Block1[N]: Locked (remain:0) Code : 12345678
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
Unlock file done
Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.

mobiwire aysha unlocked
 
itel A23 unlock done
ACTION: Direct Unlock
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 2
Detected: SPRD U2S Diag (COM22)
Platform Version MOCORTM_17B_Release_W18.26.1_P20_DebugProject Version sharkle_Smart_PhoneBASE Version FM_BASE_17B_Release_W18.26.1_P20HW Version sc9832e_modem11-28-2019 154645
Build number: A23A-SU335-8.1-ATL-V006-20200323
IMEI 1: 3581051********
IMEI 2: 3581051********
IMEI 3: 8674000********
IMEI 4: 8674000********
BT: DC543DCC9209
WIFI: DC543DCC920A
Reading simlock backup, wait....
Saved to: C:\Users\PHONE DR\Documents\spreadtrum_module\spd_simlock_nvram_b ackup\358105100772784__diag_simlock_nvram_backup_1 .tar

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 89517953
Sim 2 Unlock Code: 89517963
Warning, this is factory key, some opperators can modify factory key.
Writing simlock...
Writing simlock ok
Done.
 
Condor T1 (SP413) reset userdata and remove FRP
201130092426862719.png


Code:
Custom loader: SP413_V14_20171026.loader
Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 1.3
SELECTED: Autodetect by loader
ACTION: Reset Userdata and Remove FRP
Custom loader: SP413_V14_20171026.loader
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM5)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
***************
Manufacturer: SPA Condor Electronics
Hardware: L308C
Platform: sc8830
Fota platform: Sprd9832_7.0
Build product name: Griffe_T1
Build description: SP413_V12_20170801
Product name: Griffe_T1
Board: sp9832a_2h11_volte
Build Id: NRD90M
Model: SP413
Android Release: 7.0
Android Version: SP413_V12_20170801
Security patch: 2017-06-01
Bootloader can be unlocked: 1
This phone have frp partition.
Removing frp, wait...
Format OK.
[misc]Formating userdata, wait...
Wait untill phone will restart.
Total Time: 00:00:38
Done.
 
Condor L1 (SP622) Flash Done


Code:
Flash files count is :14
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 2.9.3
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: 13014E51324A333643 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM16)
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
HINT:
If phone stuck on logo, for some phones help factory reset.
Select factory reset tab/reset to factory default.
Wait untill phone will start charging.
[0]All done.
 
blade a602 frp success
Exe version: NCKBox AndroidMTK 2.9.3
Selected model: 0-By CPU MT6737M
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM22)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100464531324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.
 
isense Infinity E6 successfully unlocked

Quote:
Exe version: NCKDongle AndroidMTK 2.7.2
Selected model: 0-By CPU ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL+ and VOL-" or "VOL-" button untill inserting USB cable.
[3]Detected: MediaTek PreLoader USB VCOM (Android) (COM3)
\\?\usb#vid_0e8d&pid_2000#5&35b0af5&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[31]META Port Detected: MediaTek USB VCOM (Android) (COM31)
USB\VID_0E8D&PID_2007\5&35B0AF5&0&2
ChipID: MT6739,S01
[MT6739,S01]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R2.MP.V48.12.P6
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 862773041898213
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.
 
digicel dl3 pro unlocked success
digicel dl3 pro

ACTION: Read Simlock Info.
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Detected: SPRD U2S Diag (COM165)
Platform Version MOCORTM_18A_W19.08.2_P14_DebugProject Version sharkle_Smart_PhoneBASE Version FM_BASE_18A_W19.08.2_P14HW Version sc9832e_modem07-16-2019 193826
Build number: sp9832e_1h10_gofu-user 9 PPR1.180610.011 40415 release-keys
IMEI 1: 352023107938xxx
IMEI 2: 867400020316620
Serial number: DL3Pro2020100008766
BT: 000000000000
WIFI: 000000000000
Reading simlock backup, wait....
Saved to: C:\Users\hola\Documents\spreadtrum_module\backup\s pd_simlock_nvram_backup\352023107938xxx_DL3Pro2020 100008766_diag_simlock_nvram_backup.tar
UID: 5441305738335F31395F33345F34350A0A0000000000000000 00000000000000
[3]Old simlock detected, processing....

[0:0][USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10]
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 82516193
Sim 2 Unlock Code: 41023788
Warning, this is factory key, some opperators can modify factory key.
Done.
 
You must log in or register to reply here.
Back
Top