Post here Successfully Unlocked/Calculated/Flashed/Repaired Phones via NCK Premium v2

Alcatel OT-5022D Flash Done

358146099.png


Code:
Flash files count is :12
Action : Firmware update.
Selected Model: Alcatel: OT-5022D
Exe version: NCKBox AndroidMTK 2.9.7
Scenario: [0]Safe Flash
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(8) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
[8] \\?\usb#vid_0e8d&pid_2000#5&15c311e1&0&9#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(6) : MediaTek DA USB VCOM (Android) (COM6)
[6] \\?\usb#vid_0e8d&pid_2001#5&15c311e1&0&9#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
HINT:
If phone stuck on logo, for some phones help factory reset.
Select factory reset tab/reset to factory default.
Wait untill phone will start charging.
[0]All done.
 
LOGIC L61 FRP DONE



Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 1.9
SELECTED: SC9832E_EMMC
ACTION: Reset Userdata and Remove FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM14)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TA7Y31_7_35_28
***************
Manufacturer: FROG
Brand: LOGIC
Device: LOGIC_L61
Model: LOGIC L61
Build ID: Q00711
CPU arhitecture: armeabi-v7a
Hardware: sp9832e_1h10_go
Build product name: LOGIC_L61
Build description: LOGIC_L61-user 10 Q00711 1610959901 release-keys
Build Id: Q00711
Android Release: 10
Android Version: LOGIC_L61_DIGICEL_V2.0_11012021
Security patch: 2021-01-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[misc]Formating userdata, wait...
Wait untill phone will restart.
Log saved:
C:\Users\Phonestore\Documents\spreadtrum_module\Sa ved_Logs\LOGIC_L61_DIGICEL_V2.0_11012021_format_us erdata_misc.txt
Total Time: 00:00:20
 
ACE BUZZ 2 (AS0219) Flash PAC Firmware Done


199747820.png


Code:
EXE: NckBox Spreadtrum Module 2.1.2_test
ACTION: Flash Firmware.
Selected firmware: Buzz 2_AS0219_V10.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM17)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:03] Loader ok
[00:00:03] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:03] [1]First boot done.
[00:00:03] Sending second loader.
[00:00:08] Second loader sent ok.
New flash protocol detected.
[00:00:08] Reading: system
System name: system
Phone and firmware have same android
[00:00:08] Reading: miscdata
[00:00:08] Reading: l_fixnv1
NVRAM saved to: C:\Users\Ahmed GsM\Documents\spreadtrum_module\flashmode_nvram_backup\_35725XXXXXXXX\_35725XXXXXXXX_nvram_backup.tar
[00:00:18] Start write: l_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting LTE_Calibration id: 0xA05
Protecting LTE_Cali_Band1 id: 0x9C4
Protecting LTE_Cali_Band2 id: 0xA04
Protecting LTE_Cali_Band3 id: 0x9C8
Protecting LTE_Cali_Band4 id: 0x9C9
Protecting LTE_Cali_Band5 id: 0x9CA
Protecting LTE_Cali_Band6 id: 0x9CB
Protecting LTE_Cali_Band7 id: 0x9CC
Protecting LTE_Cali_Band8 id: 0x9CD
Protecting LTE_Cali_Band9 id: 0x9CE
Protecting LTE_Cali_Band10 id: 0x9CF
Protecting LTE_Cali_Band11 id: 0x9D0
Protecting LTE_Cali_Band12 id: 0x9D1
Protecting LTE_Cali_Band13 id: 0x9D2
Protecting LTE_Cali_Band14 id: 0x9D3
Protecting LTE_Cali_Band15 id: 0x9D4
Protecting LTE_Cali_Band16 id: 0x9D5
Protecting LTE_Cali_Band17 id: 0x9D6
Protecting LTE_Cali_Band18 id: 0x9D7
Protecting LTE_Cali_Band19 id: 0xA01
Protecting LTE_Cali_Band20 id: 0xA02
Protecting LTE_Cali_Band21 id: 0xA08
Protecting LTE_Cali_Band22 id: 0xA09
Protecting LTE_Cali_Band23 id: 0xA0A
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting GSM_Agc_Cali id: 0x4
Protecting BandSelect id: 0xA18
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
Protecting SIMLOCK_SIGN id: 0x1A3
Protecting SIMLOCK_PK id: 0x1A4
Protecting SIMLOCK_CUSTOMIZE_DATA id: 0x1F0
Protecting SIMLOCK_USER_DATA id: 0x1F1
Protecting SIMLOCK_NVCONTROL_KEY id: 0x1F2
Protecting SIMLOCK_KEY id: 0x1F4
Protecting SIMLOCK_CFG id: 0x7E4
Protecting GSM_rf_8psk_tx_gain_table id: 0xAA3
[00:00:24] Start write: prodnv
[00:00:24] Format: uboot
[00:00:24] [uboot]Format OK.
[00:00:24] Format: uboot_log
[00:00:24] [uboot_log]Format OK.
[00:00:24] Start write: splloader
[00:00:24] Start write: vbmeta
[00:00:25] Start write: l_modem
[00:00:29] Start write: l_deltanv
[00:00:29] Start write: l_ldsp
[00:00:32] Start write: l_gdsp
[00:00:33] Start write: pm_sys
[00:00:34] Start write: gpsgl
[00:00:34] Start write: gpsbd
[00:00:34] Start write: wcnmodem
[00:00:34] Start write: boot
[00:00:40] Start write: dtb
[00:00:42] Start write: dtbo
[00:00:43] Start write: recovery
[00:00:49] Start write: system
[00:03:49] Start write: userdata
[00:03:49] Start write: logo
[00:03:49] Start write: fbootlogo
[00:03:49] Start write: cache
[00:03:50] Format: l_runtimenv1
[00:03:50] [l_runtimenv1]Format OK.
[00:03:50] Format: misc
[00:03:50] [misc]Format OK.
[00:03:50] Start write: trustos
[00:03:50] Start write: sml
[00:03:50] Start write: vendor
[00:04:21] Start write: product
[00:04:31] Start write: persist
[00:04:32] Start write: uboot
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NckBox Spreadtrum Module 2.1.2_test
Log saved:
C:\Users\Ahmed GsM\Documents\spreadtrum_module\Saved_Logs\_writepac_.txt
Total Time: 00:05:03
Done.
 
IRIS Tab G8060 Reset FRP


510822838.png


248089960.png


Code:
Exe version: NCKBox AndroidMTK 2.9.7
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(11) : MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
[11] \\?\usb#vid_0e8d&pid_2000#5&15c311e1&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 24:00:00:00:00:00:00:00
EMMC CID: 880103443944313647 : 00000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.
 
Starlight-M09 Read PhonePassword

785275221.png


Code:
Phone Storage: NOR
EXE: NckBox Spreadtrum Module 2.1.3
SELECTED: SC6531EFM
ACTION: Read PhonePassword
-Loader format:OLD
Start Detect phone.
Phone must be off with battery inside.
Long press boot key and insert usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM6)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.2
Changing bautrate OK.
Send Second Loader.
Reading phone structure.
Flash ID: [EF4016] WINBOND: [0x400000]W25Q32FV size: 0x400000
SN: 48144890534755
EFS Start: 3B0000 Size: 0x50000
IMEI 1: 353673101XXXXX
IMEI 2: 353673101XXXXX
[6][2A1][active]Paasword: 111988
[4][21C]Password: 1234
[4][2A2]Password: 0000
Exe version: NckBox Spreadtrum Module 2.1.3
Log saved:
C:\Users\Ahmed GsM\Documents\spreadtrum_module\Saved_Logs\SC6531EFM_48144890534755_read_efs_info_1.txt
Total Time: 00:00:13
Done.
 
Code: 
Hola a todo el que vea esto y bendiciones.

Spreadtrum 9863a_3h10 Board
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 2.1.1
SELECTED: SC9863A_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM23)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TCNS02_11_25_23
***************
[S]Manufacturer: BLU
[S]Brand: BLU
[S]Device: G0350WW
[S]Model: G50 Plus
Build ID: QP1A.190711.020
Custom version: BLU_G0350WW_V10.0.04.11_GENERIC_14012022
CPU arhitecture: arm64-v8a
Hardware: s9863a1h10
Build product name: G50_Plus
Build description: s9863a1h10_Natv-user 10 QP1A.190711.020 02511 release-keys
Build Id: QP1A.190711.020
Android Release: 10
Android Version: BLU_G0350WW_V10.0.04.11_GENERIC 14-01-2022 11:46
Security patch: 2022-01-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\keuri\Documents\spreadtrum_module\Saved_L ogs\BLU_G0350WW_V10.0.04.11_GENERIC14-01-20221146_erase_frp.txt
Total Time: 00:00:20
Done.
 
Code: 
MOBICEL LEGEND NETWORK UNLOCKED BY NCK SPD PRO

Spreadtrum SP7731e Board
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
SELECTED: SC7731E_EMMC_GENERIC([simlock]A10+)
ACTION: SimUnlock
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM7)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TAYP62_10_35_34
***************
[S]Manufacturer: Mobicel
[S]Brand: Mobicel
[S]Device: Legend
[S]Model: Legend
Build ID: QP1A.190711.020
CPU arhitecture: armeabi-v7a
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Fota platform: Sprd7731E_10.0
Build product name: Legend
Build description: Mobicel_Legend_DS_T_V03_20210115_MP 10 QP1A.190711.020 1610714649 release-keys
Board: Legend
Build Id: QP1A.190711.020
Android Release: 10
Android Version: Mobicel_Legend_DS_T_V03_20210115_MP
Security patch: 2021-01-05
This phone have frp partition.
CPU NAME: SC7731E
NV partition: w_fixnv1
IMEI 1: 359781401189305
IMEI 2: 359781401189313
IMEI 3: 867400020316638
IMEI 4: 867400020316646
Simlock Type: 4

Simlock Status:
SIMLOCK: INACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[4]Simlock Type: 0 0
Backup saved to: C:\Users\GSM\Documents\spreadtrum_module\flashmode _nvram_backup\SC7731E_sc7731e_1h10_v1_1_0_Mobicel_ Legend_DS_T_V03_20210115_MP_359781401189305_359781 401189313_w_fixnv1_nvram_backup.tar
Phone have empty sign array, can be old security or erased nv.
Start write unlock, wait...
[can take 0-10 sec]Wait untill phone restart.
Exe version: NckDongle Spreadtrum Module 2.1.3
Log saved:
C:\Users\GSM\Documents\spreadtrum_module\Saved_Log s\sc7731e_1h10_v1_1_0_Mobicel_Legend_DS_T_V03_2021 0115_MP_359781401189305_359781401189313_sim_unlock _phone.txt
Total Time: 00:00:27
Done.
 
Code: 
Optus x start 2(ZTE P500) network unlock done

Start Detect phone.
With powered off phone, insert usb cable
Detected: SCI USB2Serial (COM33)
Port opened ok.
Using connection mode 1
Phone must restart in diag mode.
For some phones can take 2-30 sec to restart.
If phone not restart, posible this metod not work.
Try to select Mode 2 if Mode 1 not work..
Some firmwares can have disabled diag mode.
Making 5 sec timeout..
For some phones need to wait 5-20 sec untill will swith in diag.
Done.

ACTION: Direct Unlock
Detecting phone, wait...
Using connection mode 1
Detected: SCI USB2Serial (COM33)

Platform Version: MOCORTM_18A_W19.08.2_P48_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W19.08.2_P48
HW Version: sc9832e_modem
11-13-2020 18:14:54
Build number: OPT_AU_Z3052OV1.0.0B14
EMMC DDR SIZE :15G+1G
UID: TC0G65_4_6_22

IMEI 1: 8674190xxxxxxxx
IMEI 2: 8674000xxxxxxxx
IMEI 3: 8674000xxxxxxxx
IMEI 4: 8674000xxxxxxxx
BT: F8A34FC4FA60
WIFI: C8EAF8A21DDA
Reading simlock backup, wait....
Saved to: C:\Users\admin\Documents\spreadtrum_module\diag_nv ram_backup\OPT_AU_Z3052OV1.0.0B14_8674190xxxxxxxx_ _diag_simlock_nvram_backup.tar

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
Testing key 1
Sim unlock and repair imei is supported for this phone.
Unlock is supported for this phone
Simlock Type: 4

Collecting info from phone..
Checking simlock integrity....
Integrity seems ok, proceed with unlock....
Writing simlock ok
Writing simlock sign ok
Done.
Log saved:
C:\Users\admin\Documents\spreadtrum_module\Saved_L ogs\OPT_AU_Z3052OV1.0.0B14_8674190xxxxxxxx_diag_si mlock_unlock.txt
 
Code: 
Blu V70 FRP done


[0]Custom loader: BLU_G0270WW_V9.0.04.05_GENERIC_200715-2234.loader
Spreadtrum 9863a_1h10 Board
First 16 bytes from public rsa key.
AD7E67E09F57F0A391493DE4F96FDFBC
***************
Phone Storage: EMMC
SELECTED: Autodetect by loader
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM14)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: T3KR45_9_27_11
***************
Build ID: PPR1.180610.011
Custom version: BLU_G0270WW_V9.0.04.03_GENERIC 20-02-2020 12:00
CPU arhitecture: arm64-v8a
Manufacturer: BLU
Hardware: s9863a1h10
Build product name: G0270WW
Build description: G60-user 9 PPR1.180610.011 111 release-keys
Product name: G60
Build Id: PPR1.180610.011
Model: G60
Android Release: 9
Android Version: BLU_G0270WW_V9.0.04.03_GENERIC 20-02-2020 12:00
Security patch: 2020-02-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: NckBox Spreadtrum Module 2.1.3
Log saved:
C:\Users\Phonestore\Documents\spreadtrum_module\Sa ved_Logs\BLU_G0270WW_V9_0_04_03_GENERIC20-02-20201200_erase_frp.txt
Total Time: 00:00:38
Done.
 
You must log in or register to reply here.
Back
Top